ABS

Built for reliable light-duty drainage, the ABS Robusta Light Drainage Pump is offered in two variants - the 200 and 300 - to suit a range of domestic and light commercial applications. Designed for emptying pits, basements and cellars, it is capable of handling wastewater containing solids up to 10mm. This fully submersible unit features a pressure-tight motor and pump assembly, ensuring reliable flood-proof operation.

Built for reliable light-duty drainage, the ABS Robusta Light Drainage Pump is offered in two variants - the 200 and 300 - to suit a range of domestic and light commercial applications. Designed for emptying pits, basements and cellars, it is capable of handling wastewater containing solids up to 10mm. This fully submersible unit features a pressure-tight motor and pump assembly, ensuring reliable flood-proof operation.

Built for reliable light-duty drainage, the ABS Robusta Light Drainage Pump is offered in two variants - the 200 and 300 - to suit a range of domestic and light commercial applications. Designed for emptying pits, basements and cellars, it is capable of handling wastewater containing solids up to 10mm. This fully submersible unit features a pressure-tight motor and pump assembly, ensuring reliable flood-proof operation.

The motor housing is manufactured from corrosion-resistant materials for extended service life, while the outer casing and impeller are formed from high-strength engineered plastic. A Stainless Steel rotor shaft combined with sealed, lubricated-for-life ball bearings enhances durability and minimises maintenance requirements.

A practical combined manual and automatic switch allows flexible operation depending on site requirements. The integrated float level control enables automatic start and stop functionality, while the built-in non-return valve prevents backflow when the pump is switched off. Thermal protection sensors safeguard the motor by shutting the unit down in the event of overheating and automatically resetting once safe operating temperatures are restored. During operation, the pumped liquid also assists in cooling the motor, further reducing thermal stress.

Supplied ready for installation, the ABS Robusta Light Drainage Pump includes a dual-size hose nozzle compatible with common hose diameters, along with a 10 metre cable and standard Euro plug for straightforward connection.

The ABS Robusta 202 W/TS Sanimax Replacement Submersible Pump - 230v - 3m Cable is a Submersible product. Voltage for this item is 230V. It is supplied with a 3m cable. The maximum head for this pump is 7m.

ABS MF354 WKS Submersible pump with 10m cable, single phase.

The ABS Sulzer MF354 WKS Submersible Pump - Automatic is a Submersible product. This product is manufactured by ABS. It is supplied with a 10m cable. It also features a Float Switch.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

The ABS Sulzer MF404 DKS Submersible Pump - 10m Cable is a Submersible product. This product is manufactured by ABS. Voltage for this item is 400V. It is supplied with a 10m cable.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

The ABS Sulzer MF404 DKS Submersible Pump - 3m Cable is a Submersible product. This product is manufactured by ABS. Voltage for this item is 400V. It is supplied with a 3m cable.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

Simple, cost-effective, pump installation.

Vortex hydraulics for blockage-free pumping in critical applications.

Discharge connections G 11/4"-G 2" internal thread and DN 65 flange.

Mechanical and lip seals on rotor shaft. This product is manufactured by ABS. Thermal sensors to protect motor against overheating.

EasyFit plug-in cable connection.

Single-phase fitted with Schuko plug; three-phase with CEE plug.

The ABS Sulzer MF504 WKS Submersible Pump is a Submersible product. It is supplied with a 10m cable.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

This pump is ideal for applications such as removing rainwater, draining flooded areas, and managing nuisance water in locations like gullies or pedestrian underpasses. This product is manufactured by ABS.

The ABS Sulzer MF565 WKS Submersible Pump - Automatic - 230v is a Submersible product. Voltage for this item is 230V. It is supplied with a 10m cable. It also features a Float Switch.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

The ABS Sulzer MF324 WKS is engineered for straightforward installation and operation, making it suitable for both domestic and light commercial applications. This product is manufactured by ABS. Its robust construction and ability to handle solids make it an excellent choice for various wastewater management scenarios, particularly in situations where reliability and efficiency are crucial.

The ABS Sulzer MF324 WKS Submersible Pump is a Submersible product. It is supplied with a 10m cable. It also features a Float Switch.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

Single phase sump and drainage pump with 1 1/2" threaded discharge port and 10m cable. This product is manufactured by ABS. The ABS MF range are submersible pumps with vortex impellers engineered to allow a large free passage of solids. They are designed to allow straightforward dewatering of buildings, particularly flooded cellars, and also pedestrian underpasses.

The ABS Sulzer MF324W Submersible Pump - 240v is a Submersible product. Voltage for this item is 240V. It is supplied with a 10m cable. It has an actual flow rate of 240 Ltr/min. The maximum head for this pump is 10m.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

The ABS Sulzer MF804 D01-10-YKPM Submersible Pump - 400v - Three Phase - 550 Ltr/min. is a Submersible product. This product is manufactured by ABS. Voltage for this item is 400V. It has an actual flow rate of 550 Ltr/min. The maximum head for this pump is 16m.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

Compact submersible pump for the removal of domestic and commercial high temperature wastewater that can contain solids up to 20 mm.

Applications

The MF 154HW submersible pump has been engineered to cover a wide range of internal and external dewatering applications, but primarily where the temperature of the medium exceeds the standard upper limit (40 °C) to a maximum allowable temperature of 80 °C. This product is manufactured by ABS.

Pumping of high temperature discharge water from laundries, commercial dishwashers and washing machines.

Filling and emptying of containers, drainage of flooded cellars and removal of rainwater.

Appropriate for use in septic tanks and pumping effluent from locations below the backwash level in accordance with EN 12056

The vortex hydraulics are particularly appropriate for the pumping of fluids containing gaseous or abrasive particles.

The compact shape of the MF, fittings for easy mounting, and small sump requirements, ensure a quick and cost-effective installation of the pump.

Maximum allowable temperature of the pumped medium is 80 °C (90 °C for max.5 minutes).

The ABS Sulzer MF154 Hot Water Submersible Pump is a Submersible product. It also features a Float Switch.