Wilo TOP Circulator Pumps

2046663
Wilo - TOP-S 30/10 REPLACEMENT Head - 230V -Single Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£898.80 RRP £584.22 £486.85
In stock

Free Standard Delivery
2046664
Wilo - TOP-S 30/10 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£999.60 RRP £649.74 £541.45
3 week lead time

Free Standard Delivery
2046665
Wilo - TOP-S 40/7 REPLACEMENT Head - 230V - Single Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£1,084.80 RRP £705.12 £587.60
In stock

Free Standard Delivery
2046666
Wilo - TOP-S 40/7 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£1,084.80 RRP £705.12 £587.60
In stock

Free Standard Delivery
2046668
Wilo - TOP-S 50/4 REPLACEMENT Head - 230V - Single Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£1,467.60 RRP £953.94 £794.95
In stock

Free Standard Delivery
2046672
Wilo - TOP-S 50/7 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£1,852.80 RRP £1,204.32 £1,003.60
In stock

Free Standard Delivery
2046673
Wilo - TOP-S 50/10 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£1,863.60 RRP £1,211.34 £1,009.45
In stock

Free Standard Delivery
2046674
Wilo - TOP-S 50/15 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£2,589.60 RRP £1,683.24 £1,402.70
In stock

Free Standard Delivery
2046675/29991433
Wilo - TOP-S 65/7 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£1,807.20 RRP £1,174.68 £978.90
In stock

Free Standard Delivery
2046676 / 29991437
Wilo - TOP-S 65/10 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£2,230.80 RRP £1,450.02 £1,208.35
In stock

Free Standard Delivery
WILO-29991442
Wilo - TOP-S 80/10 REPLACEMENT Head - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£2,943.60 RRP £1,913.34 £1,594.45
In stock

Free Standard Delivery
2046692
Wilo - TOP-S 50/10 REPLACEMENT Head - 230V - Single Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£1,863.60 RRP £1,211.34 £1,009.45
In stock

Free Standard Delivery
2046694 / 29991435
Wilo - TOP-S 65/10 REPLACEMENT Head - 230V - Single Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£2,007.60 RRP £1,304.94 £1,087.45
In stock

Free Standard Delivery
2048321/29991402
Wilo - TOP-S 25/7 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£650.40 RRP £422.76 £352.30
In stock

Free Standard Delivery
2048334/29991401
Wilo - TOP-S 25/7 REPLACEMENT Head - 230V - Single Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£585.60 RRP £380.64 £317.20
In stock

Free Standard Delivery
2048336/29991408
Wilo - TOP-S 30/7 REPLACEMENT Head - 230V - Single Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£648.00 RRP £421.20 £351.00
In stock

Free Standard Delivery

Why Choose Pumpify

We get it. Anyone can talk a good game. But at Pumpify, we make sure your pumps, spares, and support actually delivers - every time.

13,000+ Products & Spares
Next-Day UK Mainland Delivery*
Free Delivery on Orders Over £50*
100% Genuine Products & Warranties
Expert Advice

Proof is in the pudding. We're trusted by the pros.

"I worked in marketing before my retirement. I have to say you are the best company for customer support and service I have ever come across. Well done!"

- Terence Ashmore

"Good buying experience. Arrived on time and represents value for money. Refill pack eco friendly and easy to install"

- Anthony Jarvis

"Very honest: order was delayed but they put their hand up and got it resolved. Kept me informed and I eventually got my order."

- Sanjay M.

"2nd time of ordering. Order placed on Wednesday, order received on Thursday. Great service. Would recommend"

- Rebecca

"Lorem ipsum dolor sit amet consectetur. Felis imperdiet fermentum faucibus at quis non sit. Elit integer imperdiet et egestas massa mauris. Dolor."

- Name

"Received it today, many thanks for super fast delivery. Your customer service is exceptional which will be in my feedback. Many thanks for your help Bob"

- Bob

"You know, I actually believe you do care about your customers. Its not just marketing. God bless you all and Merry Christmas to the whole team."

- Paul Nicholls

"I have to state that the service you provided is just perfect and i will not hesitate recommending you to all-comers."

- Anthony B

Need Advice?

Need Advice?

Need Advice?

Need Advice?

Wilo TOP Pumps

Wilo TOP Pumps

Example:	TOPS 40/10
TOP-S	Standard pump (screw-end pump or flange-end pump)
40/	Nominal connection diameter
10	Nominal delivery head [m] at Q = 0 m³/ h