STR2-2.0 CN

Grundfos STR2-2.0 CN is a regenerative shower pump with universal head and two impellers. This pump is the result of extensive research and development, resulting in a high-performance pump at an affordable price. The shower pump is continuously rated as a regenerative pump making it equipped to overcome air pockets and well-suited where the plumbing route includes multiple bends and elbows. The shower pump is used for boosting both hot and cold water to single showers or uncomplicated bathroom suites where the outlets are above or below the cold-water tank.

This high-performance composite shower pump has an modernised design, and by incorporating a low-speed induction motor, it improves durability and ensures a long life. This design ensures minimal turbulence in the pump head. The pump is supplied with a adaptable and braided Stainless Steel connection hose making it resistant to corrosion. Anti-vibration feet, long-life carbon graphite and high-density ceramic seals ensure that the operating noise is held at a minimum. The shower pump has built-in thermal protection, which immediately stops the pump motor if it overheats.

The shower pump is a WRAS-approved product and as such the whole product has undergone and passed extensive mechanical and water quality testing. Additionally, this pump is a regenerative pump making it equipped to overcome air pockets.

SSR2-2.0 CN

Grundfos SSR2-2.0 CN is a regenerative shower pump with universal head and one impeller. This pump is the result of extensive research and development, resulting in a high-performance pump at an affordable price. The shower pump is continuously rated as a regenerative pump making it equipped to overcome air pockets and well-suited where the plumbing route includes multiple bends and elbows. The shower pump is used for boosting either hot or cold water to single showers or uncomplicated bathroom suites where the outlets are above or below the cold-water tank.

This high-performance composite shower pump has an modernised design, and by incorporating a low-speed induction motor, it improves durability and ensures a long life. This design ensures minimal turbulence in the pump head. The pump is supplied with a adaptable and braided Stainless Steel connection hose making it resistant to corrosion. Anti-vibration feet, long-life carbon graphite and high-density ceramic seals ensure that the operating noise is held at a minimum. The shower pump has built-in thermal protection, which immediately stops the pump motor if it overheats.

The shower pump is a WRAS-approved product and as such the whole product has undergone and passed extensive mechanical and water quality testing. Additionally, this pump is a regenerative pump making it equipped to overcome air pockets.

The Salamander CT80 Twin Universal Regenerative Shower and Bathroom Pump - 230v - Single Phase - 2.6 bar. is a Shower Pump item. This product is manufactured by Salamander. Voltage for this item is 230V. The maximum head for this pump is 26m.

The operating pressure of this is 2.6 bar.

The Pentax PM45 Negative Head Shower Pump - 230V - Single Phase - 40 Ltr/min. is a Shower Pump item. This product is manufactured by Pentax. Voltage for this item is 230V. It has an actual flow rate of 40 Ltr/min.

The operating pressure of this is 4 bar.

The Pentax PM45 Negative Head Shower Pump - 110v - Single Phase - 40 Ltr/min. is a Booster Set item. This product is manufactured by Pentax. Voltage for this item is 110V. It has an actual flow rate of 40 Ltr/min.

Typical Twin Unit

SHOWERMATE TP Typical 2.0 bar. Twin Shower Unit. Designed to boost the hot & cold water supply to an individual shower, bath, shower mixer or mixer tap. Suitable for positive head applications only.

Stuart Turner Techflo TP Standard Twin Positive Head Shower Pump is the pinnacle of cutting-edge technology developed to elevate your water pressure experience effortlessly.

Bid farewell to low water pressure and embrace the luxury of invigorating showers with this Whisper Quiet range pump, specifically crafted for optimal performance.

developed for both hot and cold-water supplies, this pump is engineered to cater to individual showers, baths, and mixer taps, ensuring a consistent and powerful flow.

The Stuart Turner TechFlo TP 2.0 Bar.

Twin Positive Head Shower Pump is the solution you've been seeking to transform lacklustre showers into rejuvenating experiences that you'll find hard to part with.

Key Features Technical Specifications The RP120SU SuperBooster Pack is ideal for larger homes with gravity-fed systems, particularly where hot or cold water may be used individually, such as supplying cold water to an.

Typical Twin Unit

Showermate Typical 2.6 bar. Twin shower pumps can be utilised to pump the hot and cold water supplies to a shower or bathroom as required.
High quality, high performance compact pump supplied with four 15 mm anti-vibration flexible hoses.
All Showermate Standard pumps are suitable for use in open vented (gravity fed) systems for positive head applications.

Applications

• Low pressure gravity systems - boosting hot or cold water supplies to a single shower or to up to four outlets within a bathroom
• Showermate Standard pumps are suitable for use where there is already more than 1 litre/min flow from the outlet(s) to be boosted

The Grundfos - Watermill Amazon Universal STN - 2.0 Bar. delivers a maximum head of 24m and runs at 230V. It is manufactured in Brass.

STR2-1.5 C

Grundfos STR2-1.5 C is a regenerative shower pump with positive head and two impellers. This pump is the result of extensive research and development, resulting in a high-performance pump at an affordable price. The shower pump is continuously rated as a regenerative pump making it equipped to overcome air pockets and well-suited where the plumbing route includes multiple bends and elbows. The shower pump is used for boosting hot and cold water to single showers or uncomplicated bathroom suites where the outlets are below the cold-water tank.

This high-performance composite shower pump has an modernised design, and by incorporating a low-speed induction motor, it improves durability and ensures a long life. This design ensures minimal turbulence in the pump head. The pump is supplied with a adaptable and braided Stainless Steel connection hose making it resistant to corrosion. Anti-vibration feet, long-life carbon graphite and high-density ceramic seals ensure that the operating noise is held at a minimum. The shower pump has built-in thermal protection, which immediately stops the pump motor if it overheats.

The shower pump is a WRAS-approved product and as such the whole product has undergone and passed extensive mechanical and water quality testing. Additionally, this pump is a regenerative pump making it equipped to overcome air pockets.

STR2-2.0 C

Grundfos STR2-2.0 C is a regenerative shower pump with positive head and two impellers. This pump is the result of extensive research and development, resulting in a high-performance pump at an affordable price. The shower pump is continuously rated as a regenerative pump making it equipped to overcome air pockets and well-suited where the plumbing route includes multiple bends and elbows. The shower pump is used for boosting hot and cold water to single showers or uncomplicated bathroom suites where the outlets are below the cold-water tank.

This high-performance composite shower pump has an modernised design, and by incorporating a low-speed induction motor, it improves durability and ensures a long life. This design ensures minimal turbulence in the pump head. The pump is supplied with a adaptable and braided Stainless Steel connection hose making it resistant to corrosion. Anti-vibration feet, long-life carbon graphite and high-density ceramic seals ensure that the operating noise is held at a minimum. The shower pump has built-in thermal protection, which immediately stops the pump motor if it overheats.

The shower pump is a WRAS-approved product and as such the whole product has undergone and passed extensive mechanical and water quality testing. Additionally, this pump is a regenerative pump making it equipped to overcome air pockets.

SSR2-2.0 C

Grundfos SSR2-2.0 C is a regenerative shower pump with positive head and one impeller. This pump is the result of extensive research and development, resulting in a high-performance pump at an affordable price. The shower pump is continuously rated as a regenerative pump making it equipped to overcome air pockets and well-suited where the plumbing route includes multiple bends and elbows. The shower pump is used for boosting either hot or cold water to single showers or uncomplicated bathroom suites where the outlets are below the cold-water tank.

This high-performance composite shower pump has an modernised design, and by incorporating a low-speed induction motor, it improves durability and ensures a long life. This design ensures minimal turbulence in the pump head. The pump is supplied with a adaptable and braided Stainless Steel connection hose making it resistant to corrosion. Anti-vibration feet, long-life carbon graphite and high-density ceramic seals ensure that the operating noise is held at a minimum. The shower pump has built-in thermal protection, which immediately stops the pump motor if it overheats.

The shower pump is a WRAS-approved product and as such the whole product has undergone and passed extensive mechanical and water quality testing. Additionally, this pump is a regenerative pump making it equipped to overcome air pockets.

The CT60 Bathroom Universal pump is a 1.8 bar. twin regenerative shower and bathroom pump appropriate for boosting water performance in a gravity fed, negative head or positive head system.

This pump can be applied with conventional and multi-function showers and a shower head up to 100mm. This product is manufactured by Salamander. With Crossover technology inside allowing for individual outlet (hot or cold) operation, this pump is the perfect solution for boosting bathroom performance. AV couplers with isolating valves are included.

The Salamander CT60 Twin Head Universal Head Regenerative Shower and Bathroom Pump - 230v - Single Phase - 1.8 bar. is a Shower Pump item. Voltage for this item is 230V. It is supplied with a 1.5m cable.

The operating pressure of this is 1.8 bar.