The Clarke - Hippo 2 Domestic - Submersible Pump - 110V Clarke Hippo 2 Domestic Submersible Pump - 110V is a robust and dependable submersible pump, engineered with power and efficiency in mind.

The Clarke - Hippo 2 Domestic - Submersible Pump - 230V Clarke Hippo 2 Domestic Submersible Pump - 230V is a robust and dependable submersible pump, engineered with power and efficiency in mind.

The Clarke - Hippo 2A - Submersible Pump - With Float Switch Clarke Hippo 2A Submersible Pump - With Float Switch is a robust and dependable submersible pump, engineered with power and efficiency in mind.

The Clarke - CSE400A - Submersible Pump - 230V Clarke CSE400A Submersible Pump - 230v is a robust and dependable submersible pump, engineered with power and efficiency in mind.

The Clarke - SPE800 Self Priming Pump - 1 inch - 230V Clarke SPE800 Self Priming Pump - 1 inch - 230V is a robust and dependable selfpriming pump, engineered with power and efficiency in mind.

The Clarke - PSP105 Puddle Pump - 230V

The Clarke - Hippo 5A 750W - Submersible Pump - 230V

Elevated power (750W) efficient submersible water pump with float switch. Benefiting from a large 208 Ltrs per minute output and on/off float switch that can be set to operate or be turned off, for continuous duty. This submersible water pump is perfect for draining and transferring liquid in many different domestic situations. Examples of use include draining cellars and basements, flooded boats, pits, pools etc. It could also be used with the float switch disabled to drain blocked sinks or baths.

RSD 150 Puddle Buddy low level drainage pump. The RSD 150 Pump is an all round semi professional and highly portable residue pump designed for clean water in domestic applications such as rooms, garages and cellars. It requires only a shallow water

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1222 is a robust and efficient submersible pump designed for effective water removal in various Uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: Tsurumi - LSC1.4S
• Part Number: 10-10-1222
• Voltage: 230V
• Power: 0.48 kW
• Flow Rate: 170 litres per minute (L/min)
• Maximum Head: 11 metres
• Minimum Pumping Depth: Capable of pumping down to just 1mm, making it ideal for removing nuisance water from flat surfaces
• Free Passage: 6mm, allowing for the handling of small solids in suspension

• Automatic Sensor Switch: The pump includes an electronic float switch with Stainless Steel probes, encapsulated in impact-resistant rubber, suitable for both portable and fixed installations. The sensor allows for precise level control and can pump down to depths of 85mm or more depending on the sump size
• Durable Construction: The outer casing is made of pressed steel, while the pump stand is constructed from cast aluminium, providing increased protection during rugged handling. The design includes a rubber pump chamber and a urethane vortex impeller, which enhance wear resistance against sand and silt
• Dual Position Outlet Port: This feature allows the user to position the outlet hose either horizontally or vertically, preventing kinks and ensuring flexible operation
• Backflow Prevention: An integral swing check valve is included to prevent water from flowing back into the pump from the discharge hose
• Cooling System: The pump is designed with a water and air cooling route to the top outlet, enabling it to operate for extended periods even with little or no water present

The Tsurumi - LSC1.4S is widely used in:

• Flood control operations
• Construction sites
• Utilities
• Hire fleets
• Domestic Uses for draining flooded areas such as garages and basements

• Weight: Approximately 12 kg
• Cable Length: Supplied with a 10-metre heavy-duty rubber power cable

This pump combines high dynamic performance with durability, making it a reliable choice for various dewatering tasks.

The Tsurumi - LSC1.4S H2O Puddle Pump - 10-10-1224 with Automatic H¢ššO Sensor Switch is a versatile and efficient submersible pump designed for low-level water drainage Uses. This 230V model, identified by SKU 10-10-1224, offers exceptional dynamic performance and reliability for various industrial and residential uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

Pumping Capability: The LSC1.4S H2O can pump water down to an impressively low level of just 1mm, making it ideal for removing water from flat surfaces.

Power and dynamic performance:

• Power: 0.48 kW
• Maximum flow rate: 170 litres per minute
• Maximum head: 11 metres

Sizing and Weight Information:

• Size: 221 x 196 x 385 mm (w x l x h)
• Dry weight: 12.05 kg

Outlet Size: 25mm (1 inch)

Automatic Operation: Equipped with the SwitcH¢ššO system, featuring three 304 Stainless Steel probes (on, off, and common) set in an epoxy-resin filled holder.

Control Panel: Supplied with a Multi 1-P control panel for easy operation and monitoring.

Cable: Includes 10 metres of low-voltage, PVC power cable.

Versatility: Suitable for various Uses, including flood control, construction sites, utilities, and fixed installations.

Durability: Features a pressed steel outer casing and cast aluminium pump stand for increased protection and longevity.

• Integral swing check valve to prevent backflow of water
• 403 Stainless Steel shaft with ultra hard-wearing twin mechanical seal
• Patented oil chamber with oil lifter for seal lubrication during operation in any position
• Capable of extended operation with little or no water

The Tsurumi - LSC1.4S H2O Puddle Pump combines advanced technology with robust construction, making it an excellent choice for professionals seeking a reliable and efficient water removal solution.

The Tsurumi - LSC1.4S H2O Puddle Pump - 10-10-1071 with Automatic H¢ššO Sensor Switch is a versatile and efficient submersible pump designed for low-level water drainage Uses. This 230V model, identified by SKU 10-10-1071, offers exceptional dynamic performance and reliability for various industrial and residential uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

Pumping Capability: The LSC1.4S H2O can pump water down to an impressively low level of just 1mm, making it ideal for removing water from flat surfaces.

Power and dynamic performance:

• Power: 0.48 kW
• Maximum flow rate: 170 litres per minute
• Maximum head: 11 metres

Sizing and Weight Information:

• Size: 221 x 196 x 385 mm (w x l x h)
• Dry weight: 12.05 kg

Outlet Size: 50mm (2 inch)

Automatic Operation: Equipped with the SwitcH¢ššO system, featuring three 304 Stainless Steel probes (on, off, and common) set in an epoxy-resin filled holder.

Control Panel: Supplied with a Multi 1-P control panel for easy operation and monitoring.

Cable: Includes 10 metres of low-voltage, PVC power cable.

Versatility: Suitable for various Uses, including flood control, construction sites, utilities, and fixed installations.

Durability: Features a pressed steel outer casing and cast aluminium pump stand for increased protection and longevity.

• Integral swing check valve to prevent backflow of water
• 403 Stainless Steel shaft with ultra hard-wearing twin mechanical seal
• Patented oil chamber with oil lifter for seal lubrication during operation in any position
• Capable of extended operation with little or no water

The Tsurumi - LSC1.4S H2O Puddle Pump combines advanced technology with robust construction, making it an excellent choice for professionals seeking a reliable and efficient water removal solution.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1233 (SKU 10-10-1233) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This manual, 230V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: LSC1.4S
• Voltage: 230V
• Power: 0.48 kW
• Maximum Flow Rate: 170 litres per minute
• Maximum Head: 11 metres
• Outlet Diameter: 25mm (1 inch)
• Dimensions: 196mm diameter x 385mm height
• Dry Weight: 12 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC1.4S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1186 (SKU 10-10-1186) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This manual, 110V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: LSC1.4S
• Voltage: 110V
• Power: 0.48 kW
• Maximum Flow Rate: 170 litres per minute
• Maximum Head: 11 metres
• Outlet Diameter: 25mm (1 inch)
• Dimensions: 196mm diameter x 385mm height
• Dry Weight: 12 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC1.4S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1024 (SKU 10-10-1024) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This manual, 110V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: LSC1.4S
• Voltage: 110V
• Power: 0.48 kW
• Maximum Flow Rate: 170 litres per minute
• Maximum Head: 11 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 385mm height
• Dry Weight: 12 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC1.4S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1256 (SKU 10-10-1256) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This manual, 230V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: LSC1.4S
• Voltage: 230V
• Power: 0.48 kW
• Maximum Flow Rate: 170 litres per minute
• Maximum Head: 11 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 385mm height
• Dry Weight: 12 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC1.4S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC2.75S Puddle Pump - 10-10-1019 (SKU 10-10-1019) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This manual, 230V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: LSC2.75S
• Voltage: 230V
• Power: 0.75 kW
• Maximum Flow Rate: 230 litres per minute
• Maximum Head: 15 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 438mm height
• Dry Weight: 15.2 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC2.75S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.