The Tsurumi - LSC1.4S Puddle Pump - 10-10-1144 is a robust and efficient submersible pump designed for effective water removal in various Uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: Tsurumi - LSC1.4S
• Part Number: 10-10-1144
• Voltage: 110V
• Power: 0.48 kW
• Flow Rate: 170 litres per minute (L/min)
• Maximum Head: 11 metres
• Minimum Pumping Depth: Capable of pumping down to just 1mm, making it ideal for removing nuisance water from flat surfaces
• Free Passage: 6mm, allowing for the handling of small solids in suspension

• Automatic Sensor Switch: The pump includes an electronic float switch with Stainless Steel probes, encapsulated in impact-resistant rubber, suitable for both portable and fixed installations. The sensor allows for precise level control and can pump down to depths of 85mm or more depending on the sump size
• Durable Construction: The outer casing is made of pressed steel, while the pump stand is constructed from cast aluminium, providing increased protection during rugged handling. The design includes a rubber pump chamber and a urethane vortex impeller, which enhance wear resistance against sand and silt
• Dual Position Outlet Port: This feature allows the user to position the outlet hose either horizontally or vertically, preventing kinks and ensuring flexible operation
• Backflow Prevention: An integral swing check valve is included to prevent water from flowing back into the pump from the discharge hose
• Cooling System: The pump is designed with a water and air cooling route to the top outlet, enabling it to operate for extended periods even with little or no water present

The Tsurumi - LSC1.4S is widely used in:

• Flood control operations
• Construction sites
• Utilities
• Hire fleets
• Domestic Uses for draining flooded areas such as garages and basements

• Weight: Approximately 12 kg
• Cable Length: Supplied with a 10-metre heavy-duty rubber power cable

This pump combines high dynamic performance with durability, making it a reliable choice for various dewatering tasks.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1057 is a robust and efficient submersible pump designed for effective water removal in various Uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: Tsurumi - LSC1.4S
• Part Number: 10-10-1057
• Voltage: 110V
• Power: 0.48 kW
• Flow Rate: 170 litres per minute (L/min)
• Maximum Head: 11 metres
• Minimum Pumping Depth: Capable of pumping down to just 1mm, making it ideal for removing nuisance water from flat surfaces
• Free Passage: 6mm, allowing for the handling of small solids in suspension

• Automatic Sensor Switch: The pump includes an electronic float switch with Stainless Steel probes, encapsulated in impact-resistant rubber, suitable for both portable and fixed installations. The sensor allows for precise level control and can pump down to depths of 85mm or more depending on the sump size
• Durable Construction: The outer casing is made of pressed steel, while the pump stand is constructed from cast aluminium, providing increased protection during rugged handling. The design includes a rubber pump chamber and a urethane vortex impeller, which enhance wear resistance against sand and silt
• Dual Position Outlet Port: This feature allows the user to position the outlet hose either horizontally or vertically, preventing kinks and ensuring flexible operation
• Backflow Prevention: An integral swing check valve is included to prevent water from flowing back into the pump from the discharge hose
• Cooling System: The pump is designed with a water and air cooling route to the top outlet, enabling it to operate for extended periods even with little or no water present

The Tsurumi - LSC1.4S is widely used in:

• Flood control operations
• Construction sites
• Utilities
• Hire fleets
• Domestic Uses for draining flooded areas such as garages and basements

• Weight: Approximately 12 kg
• Cable Length: Supplied with a 10-metre heavy-duty rubber power cable

This pump combines high dynamic performance with durability, making it a reliable choice for various dewatering tasks.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1157 is a robust and efficient submersible pump designed for effective water removal in various Uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: Tsurumi - LSC1.4S
• Part Number: 10-10-1157
• Voltage: 230V
• Power: 0.48 kW
• Flow Rate: 170 litres per minute (L/min)
• Maximum Head: 11 metres
• Minimum Pumping Depth: Capable of pumping down to just 1mm, making it ideal for removing nuisance water from flat surfaces
• Free Passage: 6mm, allowing for the handling of small solids in suspension

• Automatic Sensor Switch: The pump includes an electronic float switch with Stainless Steel probes, encapsulated in impact-resistant rubber, suitable for both portable and fixed installations. The sensor allows for precise level control and can pump down to depths of 85mm or more depending on the sump size
• Durable Construction: The outer casing is made of pressed steel, while the pump stand is constructed from cast aluminium, providing increased protection during rugged handling. The design includes a rubber pump chamber and a urethane vortex impeller, which enhance wear resistance against sand and silt
• Dual Position Outlet Port: This feature allows the user to position the outlet hose either horizontally or vertically, preventing kinks and ensuring flexible operation
• Backflow Prevention: An integral swing check valve is included to prevent water from flowing back into the pump from the discharge hose
• Cooling System: The pump is designed with a water and air cooling route to the top outlet, enabling it to operate for extended periods even with little or no water present

The Tsurumi - LSC1.4S is widely used in:

• Flood control operations
• Construction sites
• Utilities
• Hire fleets
• Domestic Uses for draining flooded areas such as garages and basements

• Weight: Approximately 12 kg
• Cable Length: Supplied with a 10-metre heavy-duty rubber power cable

This pump combines high dynamic performance with durability, making it a reliable choice for various dewatering tasks.

The Tsurumi - LSC2.75S Puddle Pump - 10-10-1352 (SKU 10-10-1352) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This automatic, 230V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

• Model: LSC2.75S
• Voltage: 230V
• Power: 0.75 kW
• Maximum Flow Rate: 230 litres per minute
• Maximum Head: 15 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 438mm height
• Dry Weight: 15.2 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC2.75S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC1.4S H2O Puddle Pump - 10-10-1252 with Automatic H¢ššO Sensor Switch is a versatile and efficient submersible pump designed for low-level water drainage Uses. This 110V model, identified by SKU 10-10-1252, offers exceptional dynamic performance and reliability for various industrial and residential uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

Pumping Capability: The LSC1.4S H2O can pump water down to an impressively low level of just 1mm, making it ideal for removing water from flat surfaces.

Power and dynamic performance:

• Power: 0.48 kW
• Maximum flow rate: 170 litres per minute
• Maximum head: 11 metres

Sizing and Weight Information:

• Size: 221 x 196 x 385 mm (w x l x h)
• Dry weight: 12.05 kg

Outlet Size: 25mm (1 inch)

Automatic Operation: Equipped with the SwitcH¢ššO system, featuring three 304 Stainless Steel probes (on, off, and common) set in an epoxy-resin filled holder.

Control Panel: Supplied with a Multi 1-P control panel for easy operation and monitoring.

Cable: Includes 10 metres of low-voltage, PVC power cable.

Versatility: Suitable for various Uses, including flood control, construction sites, utilities, and fixed installations.

Durability: Features a pressed steel outer casing and cast aluminium pump stand for increased protection and longevity.

• Integral swing check valve to prevent backflow of water
• 403 Stainless Steel shaft with ultra hard-wearing twin mechanical seal
• Patented oil chamber with oil lifter for seal lubrication during operation in any position
• Capable of extended operation with little or no water

The Tsurumi - LSC1.4S H2O Puddle Pump combines advanced technology with robust construction, making it an excellent choice for professionals seeking a reliable and efficient water removal solution.

The Tsurumi - LSC1.4S H2O Puddle Pump - 10-10-1171 with Automatic H¢ššO Sensor Switch is a versatile and efficient submersible pump designed for low-level water drainage Uses. This 110V model, identified by SKU 10-10-1171, offers exceptional dynamic performance and reliability for various industrial and residential uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

Pumping Capability: The LSC1.4S H2O can pump water down to an impressively low level of just 1mm, making it ideal for removing water from flat surfaces.

Power and dynamic performance:

• Power: 0.48 kW
• Maximum flow rate: 170 litres per minute
• Maximum head: 11 metres

Sizing and Weight Information:

• Size: 221 x 196 x 385 mm (w x l x h)
• Dry weight: 12.05 kg

Outlet Size: 50mm (2 inch)

Automatic Operation: Equipped with the SwitcH¢ššO system, featuring three 304 Stainless Steel probes (on, off, and common) set in an epoxy-resin filled holder.

Control Panel: Supplied with a Multi 1-P control panel for easy operation and monitoring.

Cable: Includes 10 metres of low-voltage, PVC power cable.

Versatility: Suitable for various Uses, including flood control, construction sites, utilities, and fixed installations.

Durability: Features a pressed steel outer casing and cast aluminium pump stand for increased protection and longevity.

• Integral swing check valve to prevent backflow of water
• 403 Stainless Steel shaft with ultra hard-wearing twin mechanical seal
• Patented oil chamber with oil lifter for seal lubrication during operation in any position
• Capable of extended operation with little or no water

The Tsurumi - LSC1.4S H2O Puddle Pump combines advanced technology with robust construction, making it an excellent choice for professionals seeking a reliable and efficient water removal solution.

The Tsurumi - LSC2.75S H2O Puddle Pump - 10-10-1353 with Automatic H¢ššO Sensor Switch (SKU 10-10-1353) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This automatic, 230V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

• Model: LSC2.75S
• Voltage: 230V
• Power: 0.75 kW
• Maximum Flow Rate: 230 litres per minute
• Maximum Head: 15 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 438mm height
• Dry Weight: 15.2 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Automatic Operation: Equipped with the SwitcH¢ššO system, featuring three 304 Stainless Steel probes (on, off, and common) set in an epoxy-resin filled holder
• Control Panel: Supplied with a Multi 1-P control panel for easy operation and monitoring
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC2.75S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

RSD400 Puddle Buddy low level drainage pump. The RSD 150 Pump is an all round semi professional and highly portable residue pump designed for clean water in domestic applications such as rooms, garages and cellars. It requires only a shallow water

RSD400 Puddle Buddy low level drainage pump. The RSD 150 Pump is an all round semi professional and highly portable residue pump designed for clean water in domestic applications such as rooms, garages and cellars. It requires only a shallow water

Submersible Unit

The Supervort 240A submersible pump is intended for the transference of dirty water and is capable of handling semi-solids in suspension of up to 20 mm diameter.
This pump is compact in design, easy to install and features an external adjustable float switch.

The Clarke - PSV6A 400W - Submersible Pump - With Folding Base

This PSV6A Clarke Water Pump is ideal for draining surface water including flooded cellars, sumps etc. Suitable for pumping clean and dirty liquid and features fold down legs/base to pump water containing solid bodies up to 30mm in diameter or surface liquid.

Adjustable position float switch automatically turns the pump off when water level drops.

The Clarke - PSD1A Stainless Steel Clean Water - Submersible Well Pump

Designed to pump clear water from ponds & pools. Suitable for operating waterfalls, fountains, irrigating gardens and draining cellars, sinks, cisterns & baths. Includes a fitted float switch for self-activating water level control. Stainless Steel pump body.

The Clarke - PSP125B Puddle Pump - With Auto Sensor 230V Clarke PSP125B Puddle Pump - With Auto Sensor 230v is a robust and dependable submersible pump, engineered with power and efficiency in mind.

The Clarke - CSE2 - Submersible Pump - No Float - 230V

This self-priming pump can be utilised for continuous running and provides top quality general duty for clear water pumping. The strong, durable, double insulated case offers a tough corrosion and rust proof construction.

This Clarke pump also benefits form a low consumption drive with overload protection and an anti-airlock valve, complete with a extended life ceramic shaft for reliability.

The Clarke - PSP195 Puddle Pump - With Float Switch - 230V

Clarke's Submersible Puddle Pumps are designed for draining surface water, spilled liquid and flood water from domestic appliances. Suitable for pumping out waste liquid from flooded areas, cellars & sumps too. The puddle pumps are incredibly useful for clearing particularly shallow bodies of water because of their ability to pump within a matter of a few millimetres off the floor.