Grundfos - Unilift KP 150 A1 Submersible Pump - With Level Switch - 230v - 5m Head is a submersible pump for drainage, dewatering, and water transfer duties.

The Grundfos Unilift KP 150-A-1 drainage pump is engineered to deliver reliable performance across a wide range of dewatering and water transfer applications. It is well suited to sump and cellar drainage, emptying tanks and swimming pools, and handling general domestic and light commercial duties where dependable operation is essential.

Built to a high specification, the pump incorporates durable Stainless Steel components to support long service life and consistent performance. Single-phase versions are equipped with an integrated automatic thermal overload protection device, safeguarding the motor against overheating in the event of dry running.

The wet rotor configuration allows the unit to tolerate short periods of dry operation without damage. An open impeller design featuring sling and bevelled-edge vanes helps minimise the risk of blockage by fibres and debris, ensuring smooth and efficient pumping in demanding conditions.

The Grundfos Unilift KP 150-AV1 drainage pump is engineered to deliver reliable performance across a wide range of dewatering and water transfer applications. It is well suited to sump and cellar drainage, emptying tanks and swimming pools, and handling general domestic and light commercial duties where dependable operation is essential.

Built to a high specification, the pump incorporates durable Stainless Steel components to support long service life and consistent performance. Single-phase versions are equipped with an integrated automatic thermal overload protection device, safeguarding the motor against overheating in the event of dry running.

The wet rotor configuration allows the unit to tolerate short periods of dry operation without damage. An open impeller design featuring sling and bevelled-edge vanes helps minimise the risk of blockage by fibres and debris, ensuring smooth and efficient pumping in demanding conditions.

The Grundfos Unilift KP 250-M1 drainage pump is engineered to deliver reliable performance across a wide range of dewatering and water transfer applications. It is well suited to sump and cellar drainage, emptying tanks and swimming pools, and handling general domestic and light commercial duties where dependable operation is essential.

Built to a high specification, the pump incorporates durable Stainless Steel components to support long service life and consistent performance. Single-phase versions are equipped with an integrated automatic thermal overload protection device, safeguarding the motor against overheating in the event of dry running.

The wet rotor configuration allows the unit to tolerate short periods of dry operation without damage. An open impeller design featuring sling and bevelled-edge vanes helps minimise the risk of blockage by fibres and debris, ensuring smooth and efficient pumping in demanding conditions.

Unilift CC5 - A1

Grundfos Unilift CC pumps are single-stage submersible pumps with a low suction ability down to 3 mm water level. The pumps are designed for pumping rainwater and grey wastewater, e.g. from

The pumps are appropriate for both stationary and portable use. They are for self-operating operation. The pumps allow free passage of particles up to ¸10 mm.

The motor incorporates self-operating overload protection cutting out the motor in case of overload. When cooled to normal temperature, the motor restarts automatically.

Suitable for: Commercial wastewater, Domestic wastewater, Industrial wastewater treatment and reuse

Submersible Unit

Engineered to pump solids up to 5 mm and can be utilised in either automatic or manual modes. Complete with integral float switch, the Supersub 250VA is ideal for the transference of non foul water and suitable for both clean and grey water.
The pump is compact in design and easy to install.

Goliath Super is a durable sump pump made of Stainless Steel plate and fibre-reinforced plastic, resistance to corrosion. This product is manufactured by TT Pumps. It also includes a vortex impeller giving 30mm soft solids handling. Maximum depth of submersion is 20m, minimum sump: 250mm x 250mm.

Includes:

Stainless Steel casing and reinforced plastic construction

Double mechancial seal within oil bath

30mm soft solids handling

0.15KW output

50mm discharge, which can be vertical or horizontal configuration

Automatic as standard but can be converted to manual upon request

Max submersion depth: 10m

Applications:

Small water features

Cellars & basements

Domestic & industrial use

Final effluent

Nuisance water

Marine application

The Goliath Super 150 Automatic Submersible Pump - 230v is a Submersible product. Voltage for this item is 230V. It is supplied with a 5m cable. It has an actual flow rate of 233 Ltr/min. The maximum head for this pump is 6.3m. It also features a Float Switch.

Goliath Super is a durable sump pump made of Stainless Steel plate and fibre-reinforced plastic, resistance to corrosion. This product is manufactured by TT Pumps. It also includes a vortex impeller giving 30mm soft solids handling. Maximum depth of submersion is 20m, minimum sump: 250mm x 250mm.

Includes:

Stainless Steel casing and reinforced plastic construction

Double mechancial seal within oil bath

30mm soft solids handling

0.15KW output

50mm discharge, which can be vertical or horizontal configuration

Automatic as standard but can be converted to manual upon request

Max submersion depth: 10m

Applications:

Small water features

Cellars & basements

Domestic & industrial use

Final effluent

Nuisance water

Marine application

The Goliath Super 150 Automatic Submersible Pump - 110v is a Submersible product. Voltage for this item is 110V. It is supplied with a 5m cable. It has an actual flow rate of 233 Ltr/min. The maximum head for this pump is 6m. It also features a Float Switch.

Single phase, automatic submersible drainage pump, with 1 1/4" threaded discharge port

The Lowara DOC3/A Submersible Drainage Pump - With Float - 230v is a Submersible product. This product is manufactured by Lowara. Voltage for this item is 230V. The maximum head for this pump is 11.5m. It also features a Float Switch.

Built for reliable light-duty drainage, the ABS Robusta Light Drainage Pump is offered in two variants - the 200 and 300 - to suit a range of domestic and light commercial applications. Designed for emptying pits, basements and cellars, it is capable of handling wastewater containing solids up to 10mm. This fully submersible unit features a pressure-tight motor and pump assembly, ensuring reliable flood-proof operation.

Built for reliable light-duty drainage, the ABS Robusta Light Drainage Pump is offered in two variants - the 200 and 300 - to suit a range of domestic and light commercial applications. Designed for emptying pits, basements and cellars, it is capable of handling wastewater containing solids up to 10mm. This fully submersible unit features a pressure-tight motor and pump assembly, ensuring reliable flood-proof operation.

Built for reliable light-duty drainage, the ABS Robusta Light Drainage Pump is offered in two variants - the 200 and 300 - to suit a range of domestic and light commercial applications. Designed for emptying pits, basements and cellars, it is capable of handling wastewater containing solids up to 10mm. This fully submersible unit features a pressure-tight motor and pump assembly, ensuring reliable flood-proof operation.

Built for reliable light-duty drainage, the ABS Robusta Light Drainage Pump is offered in two variants - the 200 and 300 - to suit a range of domestic and light commercial applications. Designed for emptying pits, basements and cellars, it is capable of handling wastewater containing solids up to 10mm. This fully submersible unit features a pressure-tight motor and pump assembly, ensuring reliable flood-proof operation.

The motor housing is manufactured from corrosion-resistant materials for extended service life, while the outer casing and impeller are formed from high-strength engineered plastic. A Stainless Steel rotor shaft combined with sealed, lubricated-for-life ball bearings enhances durability and minimises maintenance requirements.

A practical combined manual and automatic switch allows flexible operation depending on site requirements. The integrated float level control enables automatic start and stop functionality, while the built-in non-return valve prevents backflow when the pump is switched off. Thermal protection sensors safeguard the motor by shutting the unit down in the event of overheating and automatically resetting once safe operating temperatures are restored. During operation, the pumped liquid also assists in cooling the motor, further reducing thermal stress.

Supplied ready for installation, the ABS Robusta Light Drainage Pump includes a dual-size hose nozzle compatible with common hose diameters, along with a 10 metre cable and standard Euro plug for straightforward connection.

The ABS Robusta 202 W/TS Sanimax Replacement Submersible Pump - 230v - 3m Cable is a Submersible product. Voltage for this item is 230V. It is supplied with a 3m cable. The maximum head for this pump is 7m.

The Clarke - HSE 200A - Submersible Pump - 1 1/2'' - 230V

The HSE200A is suitable for pumping both dirty and clean water. It is also ideal for pools, fish basin circulation*, rain water drainage, waterfall fountains, garden spraying, sump pits and waste water drainage. The HSE 200A features a robust Cast Iron base.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

This pump is ideal for applications such as removing rainwater, draining flooded areas, and managing nuisance water in locations like gullies or pedestrian underpasses. This product is manufactured by ABS.

The ABS Sulzer MF565 WKS Submersible Pump - Automatic - 230v is a Submersible product. Voltage for this item is 230V. It is supplied with a 10m cable. It also features a Float Switch.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

The ABS Sulzer MF565 Submersible Pump - Manual - 230v is a Submersible product. This product is manufactured by ABS. Voltage for this item is 230V. It is supplied with a 10m cable.