UP 20-45 N 150
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump is characterized by:

The motor is a 1-phase motor. No additional motor protection is required.

Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation

UP 20-30 N 150
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump is characterized by:

The motor is a 1-phase motor. No additional motor protection is required.

Grundfos UP 20-30N Domestic Hot Water Service Pump Circulator, 230v.

The UP 20-30N is a Stainless Steel fixed-speed circulating pump suitable for domestic hot-water systems.

The UP 20-30N can be connected to an on/off time switch to save energy.

The on/off time switch can switch the pump on/off to limit pump operation to periods when hot water is usually required.

These pumps can be used in both open and closed systems.

Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation

UP 20-15 N 150
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump is characterized by:

The motor is a 1-phase motor. No additional motor protection is required.

Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation

UP 20-07 N 150
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump is characterized by:

The motor is a 1-phase motor. No additional motor protection is required.

Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation

COMFORT 15-14 B

COMFORT is an high-efficiency circulator designed for hot-water recirculation in residential buildings with a dedicated return line. It is compatible with all types of water heater tanks, tankless systems, solar or heat pumps whether or not the system has mixing or tampering valves installed.

The pump features a space-efficient housing and a permanent magnet with an integrated control unit. The spherical rotor, equipped with an impeller, ensures optimal functionality supported by a heavy-duty single-bearing ball system. The drinking-water approved brass pump housing guarantees both safety and reliability.

COMFORT features the continuous operation 24/7 mode which is appropriate for external control via plug-in timer, gas boiler or heat-pump controller.

The product features:

Suitable for: Domestic hot water recirculation

The Home Booster unit incorporates an integrated 200 litre storage tank, providing a usable capacity of 180 litres and complete with a Type AB air gap in full compliance with Water Byelaws regulations. This design ensures secure separation from the mains supply while maintaining a reliable and protected water reserve.

A high-grade Stainless Steel pump is fitted as standard, delivering efficient performance, consistent pressure, extended service life and low-noise operation. For properties with increased demand, or where incoming mains pressure results in slow tank replenishment, an additional 180 litre slave storage tank can be specified to expand overall capacity and improve system resilience.

Supplied with a 2 Year Warranty.

Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.

The Home Booster unit incorporates an integrated 200 litre storage tank, providing a usable capacity of 180 litres and complete with a Type AB air gap in full compliance with Water Byelaws regulations. This design ensures secure separation from the mains supply while maintaining a reliable and protected water reserve.

A high-grade Stainless Steel pump is fitted as standard, delivering efficient performance, consistent pressure, extended service life and low-noise operation. For properties with increased demand, or where incoming mains pressure results in slow tank replenishment, an additional 180 litre slave storage tank can be specified to expand overall capacity and improve system resilience.

Supplied with a 2 Year Warranty.

Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.

Note: The above unit cannot be connected directly to a water company water supply; it must be fed by a break tank to adhere to U.K water by-laws.

3 Year Warranty

The DAB ESYBOX Electronic Water Pressure System - 230V is a Pressurisation Unit item. This product is manufactured by Dab. Voltage for this item is 230V. It has an actual flow rate of 120 Ltr/min. The maximum head for this pump is 65m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The operating pressure of this is 8 Bar.

Grundfos Max-E Boost Residential, Light Commercial and Commercial Package cold water pressure booster set for use on larger applications.

CME 3-6 A-R-I-E-AQQE U-A-D-N

space-efficient, dependable, horizontal, multi-stage, end-suction centrifugal pump unit with axial suction port and radial discharge port. Pump materials in contact with the liquid are in Stainless Steel. The mechanical shaft seal is a specially engineered, unbalanced O-ring seal. All pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1). The pump is equipped with a 1-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:

Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, Domestic water pressure boosting, Industrial cleaning process, Industrial heating, Industrial water supply and transfer, Desalination, Water distribution, Irrigation, Community water supply

SCALA2 3-45

Grundfos SCALA2 is fully integrated, self-priming, space-efficient waterworks for pressure boosting in domestic applications. SCALA2 incorporates integrated speed control, enabling perfect pressure at the taps, meaning that the pump performance automatically adjusts according to demand.

SCALA2 can be installed in three straightforward steps:

1. Connect the pipes.

2. Prime the pump.

3. Plug the pump into the power outlet, and the pump starts.

Grundfos SCALA2 has all the components necessary to ensure comfortable pressure:

SCALA2 features self-priming, which enables the pump to extract water from a level below the pump. Once adequately primed, the pump is capable of effortlessly lifting water from depths down to 8 metres in less than 5 minutes. The pump moreover guarantees dependable water supply in situations where there is a risk of dry running and leakages in the inlet hose or pipes, thereby enhancing the overall reliability of the system.

In the event of dry running, water shortage, extreme temperatures or if the pump becomes blocked due to seizure or overload, the pump automatically shuts down, preventing damage or motor burnout.

The pump features an self-operating reset function. In case of dry running or similar alarm, the pump stops. The pump attempts to restart every five minutes for a total of eight times. After the eighth attempt, a new restart attempt occurs every 24 hours. The self-operating reset function can be deactivated. Thanks to its hydraulic design, permanent-magnet motor and water cooling, the pump is extremely low-noise, 44 dB(A) in typical use, which makes it appropriate for indoor as well as outdoor use. Maximum noise level at full load is 53 dB(A).

The built-in pressure tank reduces the number of starts and stops in case of leakages in the pipe system, thereby prolonging the lifetime of the pump.

Suitable for: Domestic ground water intake, Domestic rainwater harvesting, Domestic water pressure boosting

The Clarke - CBM240E 1" Multi Stage Cold Water Booster Pump - 230V

This elevated efficiency multi stage tankless booster pump has an electronic control unit and combines elevated output with huge 14 metre lift height.

The CT60 Bathroom Universal pump is a 1.8 bar. twin regenerative shower and bathroom pump appropriate for boosting water performance in a gravity fed, negative head or positive head system.

This pump can be applied with conventional and multi-function showers and a shower head up to 100mm. This product is manufactured by Salamander. With Crossover technology inside allowing for individual outlet (hot or cold) operation, this pump is the perfect solution for boosting bathroom performance. AV couplers with isolating valves are included.

The Salamander CT60 Twin Head Universal Head Regenerative Shower and Bathroom Pump - 230v - Single Phase - 1.8 bar. is a Shower Pump item. Voltage for this item is 230V. It is supplied with a 1.5m cable.

The operating pressure of this is 1.8 bar.

The Aquaboost Horizontal Booster Set offers variable speed twin pump pumps capable of boosting cold water at up to 30 m3/h or up to 9.2 bar. pressure in light commercial applications.

Aquaboost Booster Sets can be configured for duty-assist or duty-standby modes.

Key Product Features:

• Variable Speed
• Duty-Assist and duty-stantby modes
• WRAS approved materials
• Continuously rated operation
• Stainless Steel manifold assembly
• Anti-vibration mounting feet
• 24 litre pressure vessel included

The Aquaboost Horizontal Booster Set offers variable speed twin pump pumps capable of boosting cold water at up to 30 m3/h or up to 9.2 bar. pressure in light commercial applications.

Aquaboost Booster Sets can be configured for duty-assist or duty-standby modes.

Key Product Features:

• Variable speed pump control
• Duty-assist and duty-standby modes
• WRAS approved materials
• Continuously rated operation
• Stainless Steel manifold assembly
• Anti-vibration mounting feet
• 24 litre pressure vessel included

The Aquaboost ABB 0906 3H-SPC/M Horizontal Booster Set offers variable speed triple pump pumps capable of boosting cold water at up to 45 m³/h or up to 7.1 bar. pressure in light commercial applications.

Key Feature:

• Variable speed pump control
• Duty-assist and duty-standby modes
• WRAS approved materials
• Continuously rated operation
• Stainless Steel manifold assembly
• Anti-vibration mounting feet
• 24 litre pressure vessel included