The Grundfos Unilift KP 250-M1 drainage pump is engineered to deliver reliable performance across a wide range of dewatering and water transfer applications. It is well suited to sump and cellar drainage, emptying tanks and swimming pools, and handling general domestic and light commercial duties where dependable operation is essential.

Built to a high specification, the pump incorporates durable Stainless Steel components to support long service life and consistent performance. Single-phase versions are equipped with an integrated automatic thermal overload protection device, safeguarding the motor against overheating in the event of dry running.

The wet rotor configuration allows the unit to tolerate short periods of dry operation without damage. An open impeller design featuring sling and bevelled-edge vanes helps minimise the risk of blockage by fibres and debris, ensuring smooth and efficient pumping in demanding conditions.

Unilift CC5 - A1

Grundfos Unilift CC pumps are single-stage submersible pumps with a low suction ability down to 3 mm water level. The pumps are designed for pumping rainwater and grey wastewater, e.g. from

The pumps are appropriate for both stationary and portable use. They are for self-operating operation. The pumps allow free passage of particles up to ¸10 mm.

The motor incorporates self-operating overload protection cutting out the motor in case of overload. When cooled to normal temperature, the motor restarts automatically.

Suitable for: Commercial wastewater, Domestic wastewater, Industrial wastewater treatment and reuse

Goliath Super is a durable sump pump made of Stainless Steel plate and fibre-reinforced plastic, resistance to corrosion. This product is manufactured by TT Pumps. It also includes a vortex impeller giving 30mm soft solids handling. Maximum depth of submersion is 20m, minimum sump: 250mm x 250mm.

Includes:

Stainless Steel casing and reinforced plastic construction

Double mechancial seal within oil bath

30mm soft solids handling

0.15KW output

50mm discharge, which can be vertical or horizontal configuration

Automatic as standard but can be converted to manual upon request

Max submersion depth: 10m

Applications:

Small water features

Cellars & basements

Domestic & industrial use

Final effluent

Nuisance water

Marine application

The Goliath Super 150 Automatic Submersible Pump - 230v is a Submersible product. Voltage for this item is 230V. It is supplied with a 5m cable. It has an actual flow rate of 233 Ltr/min. The maximum head for this pump is 6.3m. It also features a Float Switch.

Built for reliable light-duty drainage, the ABS Robusta Light Drainage Pump is offered in two variants - the 200 and 300 - to suit a range of domestic and light commercial applications. Designed for emptying pits, basements and cellars, it is capable of handling wastewater containing solids up to 10mm. This fully submersible unit features a pressure-tight motor and pump assembly, ensuring reliable flood-proof operation.

Built for reliable light-duty drainage, the ABS Robusta Light Drainage Pump is offered in two variants - the 200 and 300 - to suit a range of domestic and light commercial applications. Designed for emptying pits, basements and cellars, it is capable of handling wastewater containing solids up to 10mm. This fully submersible unit features a pressure-tight motor and pump assembly, ensuring reliable flood-proof operation.

Built for reliable light-duty drainage, the ABS Robusta Light Drainage Pump is offered in two variants - the 200 and 300 - to suit a range of domestic and light commercial applications. Designed for emptying pits, basements and cellars, it is capable of handling wastewater containing solids up to 10mm. This fully submersible unit features a pressure-tight motor and pump assembly, ensuring reliable flood-proof operation.

Built for reliable light-duty drainage, the ABS Robusta Light Drainage Pump is offered in two variants - the 200 and 300 - to suit a range of domestic and light commercial applications. Designed for emptying pits, basements and cellars, it is capable of handling wastewater containing solids up to 10mm. This fully submersible unit features a pressure-tight motor and pump assembly, ensuring reliable flood-proof operation.

The motor housing is manufactured from corrosion-resistant materials for extended service life, while the outer casing and impeller are formed from high-strength engineered plastic. A Stainless Steel rotor shaft combined with sealed, lubricated-for-life ball bearings enhances durability and minimises maintenance requirements.

A practical combined manual and automatic switch allows flexible operation depending on site requirements. The integrated float level control enables automatic start and stop functionality, while the built-in non-return valve prevents backflow when the pump is switched off. Thermal protection sensors safeguard the motor by shutting the unit down in the event of overheating and automatically resetting once safe operating temperatures are restored. During operation, the pumped liquid also assists in cooling the motor, further reducing thermal stress.

Supplied ready for installation, the ABS Robusta Light Drainage Pump includes a dual-size hose nozzle compatible with common hose diameters, along with a 10 metre cable and standard Euro plug for straightforward connection.

The ABS Robusta 202 W/TS Sanimax Replacement Submersible Pump - 230v - 3m Cable is a Submersible product. Voltage for this item is 230V. It is supplied with a 3m cable. The maximum head for this pump is 7m.

The Clarke - HSE 200A - Submersible Pump - 1 1/2'' - 230V

The HSE200A is suitable for pumping both dirty and clean water. It is also ideal for pools, fish basin circulation*, rain water drainage, waterfall fountains, garden spraying, sump pits and waste water drainage. The HSE 200A features a robust Cast Iron base.

The Clarke - CWBP300 ¾" 400W 36 Ltr/min. 11m Head Water Butt Pump (230V)

This water pump delivers a simple means to extract water from butts and can be utilised with chlorinated swimming reservoir water. An ideal garden tool the CWBP300 can be adjusted in length for use with butts of different sizes and its 3/4'' BSP threaded outlet has a quick fit hose connection. Completing this tool is a dependable build and a powerful 400W for optimum operation.

The Clarke - STP12 12V - Submersible Transfer Pump

The Clarke STP12 Submersible Transfer Pump is ideal for re-fuelling, removing bilge liquid, refilling transmission and hydraulic fluid systems etc. where there is no or limited access to mains electricity. This transfer pump can also be used to pump diesel kerosene (paraffin) and clear liquid. Not suitable for use with petrol.

Supplied with 3m outlet hose with a Stainless Steel nozzle and 4m (approx.) battery lead with crocodile clips.

The Clarke - PSSV2A 1½" 900W 208Lpm 8m Head Stainless Steel - Submersible Dirty Water Pump with Float Switch (230V)

A heavy duty submersible pump suitable for draining pits, sumps, ditches, footings etc. can be utilised for both clean and dirty water applications including water with particles upto 35mm dia. Features a fitted float switch for self-activating water level control. Stainless Steel pump body.

Product Applications

The DAB KPS 30/16 M is a centrifugal peripheral pump engineered to be applied in domestic and residential environments for pressurization, rainwater re-use or gardening and irrigation. This product is manufactured by Dab.

Construction Includes Of The Pump

KPS has the pump body in cataphoresis Cast Iron, threaded inlet on the side.
Cast Iron support with brass shaving plate for KPS 30/16 and KPS 38/18 models.
Carbon-ceramic mechanical seal. Brass impeller.

Construction Features Of The Motor

Air-cooled asynchronous motor. Motor shaft in AISI 416 Stainless Steel.
Motor circuit breaker and permanent capacitor included as standard in the single-phase version.
Protection by the user for the three-phase versions.

The DAB KPS 30/16 M Centrifugal Peripheral Pump - 240v - Single Phase - 50 Ltr/min. is a Peripheral Pump item. Voltage for this item is 240V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 84m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB KPS 30/16 MB is a centrifugal peripheral pump appropriate for domestic installations, water supply systems, small gardening and irrigation applications, draining cisterns and even for some small industrial applications.

Construction Includes Of The Pump

Brass pump body and motor support for KP 60/6 and KP 60/12. This product is manufactured by Dab. Pump body with radial suction for KP and KPS; front suction for KPF. Cast Iron support with brass wear disc for KPS 30/16 and KP 38/18. KPS 30/16 is available on request with bronze pump body and support. Brass impeller. Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Closed asynchronous type, external ventilation cooling. Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability. Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions. For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations. Construction according to CEI 2-3 and CEI 61-69 (EN 60335-2-41).

The DAB KPS 30/16 MB Centrifugal Peripheral Pump - 240v - Single Phase - 50 Ltr/min. is a Peripheral Pump item. Voltage for this item is 240V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 84m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.