Showermate Standard Twin pumps are designed for installation into vented systems to equally boost both the hot and cold water supplies to the bathroom or a single shower. They require a gravity flow of more than 0.8 litres per minute through the outlet to start and are suitable for positive head applications.

Features:

• 3 year guarantee 
• 1.8 and 2.6 bar. options 
• Suitable for positive head applications 
• High quality, high performing plastic pump supplied with 15 mm flexible hoses with integral ISO valves 
• Quiet operation 
• WRAS approved product 
• Continuously rated 
• Anti-vibration feet 
• EPDM/PTFE/Al. Oxide seal 
• Pre-wired with 1.5 metre power cable

Typical Single Unit

SHOWERMATE Typical 2.6 bar. Single Unit. can be utilised in pairs to pump hot and cold water supplies independently, or as a single pump to boost the hot or cold water supply as required.
High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.
All Showermate Standard pumps are suitable for use in open vented (gravity fed) systems for positive head applications where the existing flow due to gravity is more than 2 litres/min.

Applications

• Boosting hot or cold water supplies to a single tap or the blended water between a shower valve and shower head in low pressure gravity systems
• Showermate Standard pumps are suitable for use where there is already more than 2 litres/min flow from the outlet(s) to be boosted

Delivers a cost effective, high performance shower pump. At 30% smaller than the standard Showermate pump, bathroom designers and installers can specify the Showermate model in a wide range of situations, including small and confined spaces.

Standard Twin pumps are engineered to boost the incoming hot and cold water supply to an individual shower, bath, shower mixer or mixer tap. Suitable for positive head applications only.

Suitable for use where there is already more than 1 litre/min flow from the outlet(s) to be boosted.

Features:

• 3 year guarantee 
• 1.5 and 2.0 bar. options 
• Suitable for positive head applications 
• Quiet operation 
• WRAS approved product 
• Intermittently rated 
• Anti-vibration feet 
• EPDM/PTFE/Al. Oxide seal 
• Pre-wired with 1.5 metre power cable

Showermate ECO Standard Single pumps are engineered to improve water supplies to single taps or to pump blended water from a shower mixer. Suitable for positive head applications only.

Suitable for use where there is already more than 1 litre/min flow from the outlet(s) to be boosted.

Features:

• 3 year guarantee 
• 2.0 bar. option 
• Suitable for positive head applications 
• High quality compact plastic pump supplied with 15 mm flexible hoses with integral ISO valves on inlets 
• Quiet operation 
• WRAS approved product 
• Intermittently rated 
• Anti-vibration feet 
• EPDM/PTFE/Al. Oxide seal 
• Pre-wired with 1.5 metre power cable

Universal Twin

Showermate Universal 2.0 bar. Twin shower pumps can be utilised to pump the hot and cold liquid supplies to a shower or bathroom as required.
High quality, high performance compact pump supplied with four 15 mm anti-vibration flexible hoses.
All Showermate Universal pumps are suitable for use in open vented (gravity fed) systems for both positive & negative head applications.

Applications

• Low pressure gravity systems - boosting hot or cold water supplies to a single shower or to up to four outlets within a bathroom
• Showermate Universal pumps are suitable for use where there is less than 1 litre/min gravity flow from the outlet(s) to be boosted

Universal Twin pumps are designed for installation into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications. They offer a high quality option for boosting water in a complete bathroom or to an individual shower.

Suitable for use where there is less than 1 litre/min flow from the outlet(s) to be boosted.

Features:

• 3 year guarantee 
• 1.8 and 2.6 bar. options 
• Suitable for positive or negative head applications 
• High quality, high performing plastic pump supplied with 15 mm flexible hoses with integral ISO valves 
• Quiet operation 
• WRAS approved product 
• Continuously rated 
• Anti-vibration feet 
• EPDM/PTFE/Al. Oxide seal 
• Pre-wired with 1.5 metre power cable

Universal Single

Showermate Universal 2.6 bar. Single shower pumps can be utilised in pairs to pump hot and cold liquid supplies independently, or as a single pump to boost the hot or cold water supply as required.
High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.
All Showermate Universal pumps are suitable for use in open vented (gravity fed) systems for both positive & negative head applications.

Applications

• Low pressure gravity systems - boosting hot or cold water supplies to a single shower or to up to four outlets within a bathroom
• Showermate Universal pumps are suitable for use where there is less than 1 litre/min gravity flow from the outlet(s) to be boosted

Universal Twin pumps are designed for installation into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications. They offer a high quality option for boosting water in a complete bathroom or to an individual shower.

Suitable for use where there is less than 1 litre/min flow from the outlet(s) to be boosted.

Features:

• 3 year guarantee 
• 1.8 and 2.6 bar. options 
• Suitable for positive or negative head applications 
• High quality, high performing plastic pump supplied with 15 mm flexible hoses with integral ISO valves 
• Quiet operation 
• WRAS approved product 
• Continuously rated 
• Anti-vibration feet 
• EPDM/PTFE/Al. Oxide seal 
• Pre-wired with 1.5 metre power cable

Typical Twin Unit

SHOWERMATE TP Typical 2.0 bar. Twin Shower Unit. Designed to boost the hot & cold water supply to an individual shower, bath, shower mixer or mixer tap. Suitable for positive head applications only.

Stuart Turner Techflo TP Standard Twin Positive Head Shower Pump is the pinnacle of cutting-edge technology developed to elevate your water pressure experience effortlessly.

Bid farewell to low water pressure and embrace the luxury of invigorating showers with this Whisper Quiet range pump, specifically crafted for optimal performance.

developed for both hot and cold-water supplies, this pump is engineered to cater to individual showers, baths, and mixer taps, ensuring a consistent and powerful flow.

The Stuart Turner TechFlo TP 2.0 Bar.

Twin Positive Head Shower Pump is the solution you've been seeking to transform lacklustre showers into rejuvenating experiences that you'll find hard to part with.

Typical Twin Unit

Showermate Typical 2.6 bar. Twin shower pumps can be utilised to pump the hot and cold water supplies to a shower or bathroom as required.
High quality, high performance compact pump supplied with four 15 mm anti-vibration flexible hoses.
All Showermate Standard pumps are suitable for use in open vented (gravity fed) systems for positive head applications.

Applications

• Low pressure gravity systems - boosting hot or cold water supplies to a single shower or to up to four outlets within a bathroom
• Showermate Standard pumps are suitable for use where there is already more than 1 litre/min flow from the outlet(s) to be boosted