Product Applications

Automatic water lifting sets, particularly appropriate for domestic use, small installations for civil, industrial and agricultural use, washing systems and hobbies.

These are characterised by the use of JET self-priming electropumps which can operate even when there is air, gas and small quantities of sand in the water.

The set is composed of a diaphragm tank with capacity 20 litres, pressure switch for automatic operation, pressure gauge, JET electropump complete with power cable and plug, kit for coupling the pump and the tank, all assembled and ready for installation. This product is manufactured by Dab.

Construction Includes Of The Pump

Die-cast aluminium pump body and motor support. Technopolymer impeller, diffuser, Venturi tube and sand guard. Stainless Steel pressure discs. Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Induction motor, closed and cooled with external ventilation. Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life. Built-in thermal and current overload protection and a capacitor permanently in circuit. Manufactured according to CEI 2-3 and CEI 61-69 standards (EN 60335-2-41). Motor protection: IP44 Terminal box protection: IP55 Insulation class: F

Construction Features Of The Tank

Horizontal type, capacity 20 litres, with butyl diaphragm, complete with feet on the bottom and brackets for fixing the pump on top.

The DAB AQUAJET 82 M-G Booster Set - 240v - Single Phase - 90 Ltr/min. is a Booster Set item. Voltage for this item is 240V. It has an actual flow rate of 90 Ltr/min. The maximum head for this pump is 61m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Protections

The Calpeda Meta Small Pressure Boosting System with Integrated Frequency Converter - 230v - Single Phase is a Home Booster Pump item. This product is manufactured by Calpeda. Voltage for this item is 230V.

The ESYTANK delivers a modular portable water storage tank and pump system. This product is manufactured by Dab. Fully packaged solution with integrated ESYDOCK station. The ESYTANK modular design lets you also increase your water storage capacity by adding additional tanks to three of its sides. A twin pump duty assist or duty standby system can also be created. The DAB ESYBOX is NOT included and needs to be purchased separately.

DAB ESYTANK units are robust, compact break-tank style solutions intended for domestic and light commercial installations, helping stabilise demand peaks and maintain consistent performance from a connected booster pump system.

• Creates a buffer store to support steady boosted supply
• Helps protect booster operation where mains supply is variable
• Neat, above-ground tank format for plant rooms and utility spaces
• Suitable for clean / potable-water boosting setups (installation dependent)

Common uses include whole-house pressure boosting, small commercial outlets, multi-outlet properties, and sites where a buffer tank improves system stability and reduces reliance on gravity fed systems.

The Mikrofill MikroPro 8 is a space saving, compact sealed system pressurisation bundle for LPHW/CHW applications. It pairs the Mikrofill 3 advanced direct-type pressurisation unit (cold fill up to 4.7 Bar), a MikroPro 8 Ltrs (3 Bar) expansion vessel, and a ¾" quick-fit service valve.

The direct-fill design connects to the mains/boosted supply to automatically fill and top-up the system. A digital control system with LCD display simplifies setup, while a high-flow WRAS-approved fill valve, low energy use (10 Watts standby / 30 Watts running) and a fill volume indicator support efficient operation and water-treatment calculations.

• Direct-type pressurisation cold fill to 4.7 Bar
• MikroPro 8 Ltrs expansion vessel rated to 3 Bar
• Automatic system fill & top-up with LCD interface
• WRAS-approved high-flow fill valve

The MikroPro vessel is PED 97/23/EC compliant with a durable powder-coated finish and threaded connections; max operating temperature 70 C, typical max pressure 3 Bar (≤35 Ltrs) and up to 6 Bar (≤1000 Ltrs). Ideal for sealed heating and chilled-water systems, plus refrigeration and industrial cooling.

The Mikrofill MikroPro 12 is a space saving, compact sealed system pressurisation bundle for LPHW/CHW applications. It pairs the Mikrofill 3 advanced direct-type pressurisation unit (cold fill up to 4.7 Bar), a MikroPro 12 Ltrs (3 Bar) expansion vessel, and a ¾" quick-fit service valve.

The direct-fill design connects to the mains/boosted supply to automatically fill and top-up the system. A digital control system with LCD display simplifies setup, while a high-flow WRAS-approved fill valve, low energy use (10 Watts standby / 30 Watts running) and a fill volume indicator support efficient operation and water-treatment calculations.

• Direct-type pressurisation cold fill to 4.7 Bar
• MikroPro 12 Ltrs expansion vessel rated to 3 Bar
• Automatic system fill & top-up with LCD interface
• WRAS-approved high-flow fill valve

The MikroPro vessel is PED 97/23/EC compliant with a durable powder-coated finish and threaded connections; max operating temperature 70 C, typical max pressure 3 Bar (≤35 Ltrs) and up to 6 Bar (≤1000 Ltrs). Ideal for sealed heating and chilled-water systems, plus refrigeration and industrial cooling.

The Mikrofill MikroPro 18 is a space saving, compact sealed system pressurisation bundle for LPHW/CHW applications. It pairs the Mikrofill 3 advanced direct-type pressurisation unit (cold fill up to 4.7 Bar), a MikroPro 18 Ltrs (3 Bar) expansion vessel, and a ¾" quick-fit service valve.

The direct-fill design connects to the mains/boosted supply to automatically fill and top-up the system. A digital control system with LCD display simplifies setup, while a high-flow WRAS-approved fill valve, low energy use (10 Watts standby / 30 Watts running) and a fill volume indicator support efficient operation and water-treatment calculations.

• Direct-type pressurisation cold fill to 4.7 Bar
• MikroPro 18 Ltrs expansion vessel rated to 3 Bar
• Automatic system fill & top-up with LCD interface
• WRAS-approved high-flow fill valve

The MikroPro vessel is PED 97/23/EC compliant with a durable powder-coated finish and threaded connections; max operating temperature 70 C, typical max pressure 3 Bar (≤35 Ltrs) and up to 6 Bar (≤1000 Ltrs). Ideal for sealed heating and chilled-water systems, plus refrigeration and industrial cooling.

The Mikrofill MikroPro 25 is a space saving, compact sealed system pressurisation bundle for LPHW/CHW applications. It pairs the Mikrofill 3 advanced direct-type pressurisation unit (cold fill up to 4.7 Bar), a MikroPro 25 Ltrs (3 Bar) expansion vessel, and a ¾" quick-fit service valve.

The direct-fill design connects to the mains/boosted supply to automatically fill and top-up the system. A digital control system with LCD display simplifies setup, while a high-flow WRAS-approved fill valve, low energy use (10 Watts standby / 30 Watts running) and a fill volume indicator support efficient operation and water-treatment calculations.

• Direct-type pressurisation cold fill to 4.7 Bar
• MikroPro 25 Ltrs expansion vessel rated to 3 Bar
• Automatic system fill & top-up with LCD interface
• WRAS-approved high-flow fill valve

The MikroPro vessel is PED 97/23/EC compliant with a durable powder-coated finish and threaded connections; max operating temperature 70 C, typical max pressure 3 Bar (≤35 Ltrs) and up to 6 Bar (≤1000 Ltrs). Ideal for sealed heating and chilled-water systems, plus refrigeration and industrial cooling.

Mikrofill - 35 Water Pressurisation Package - 35 Litre - 4.7 bar - Single Phase - 230V is a water pressurisation package for maintaining boosted water pressure in domestic and commercial systems.

The Mikrofill MikroPro 250 is a space saving, compact sealed system pressurisation bundle for LPHW/CHW applications. It pairs the Mikrofill 3 advanced direct-type pressurisation unit (cold fill up to 4.7 Bar), a MikroPro 250 Ltrs (6 Bar) expansion vessel, and a ¾" quick-fit service valve.

The direct-fill design connects to the mains/boosted supply to automatically fill and top-up the system. A digital control system with LCD display simplifies setup, while a high-flow WRAS-approved fill valve, low energy use (10 Watts standby / 30 Watts running) and a fill volume indicator support efficient operation and water-treatment calculations.

• Direct-type pressurisation cold fill to 4.7 Bar
• MikroPro 250 Ltrs expansion vessel rated to 6 Bar
• Automatic system fill & top-up with LCD interface
• WRAS-approved high-flow fill valve

The MikroPro vessel is PED 97/23/EC compliant with a durable powder-coated finish and threaded connections; max operating temperature 70 C, typical max pressure 6 Bar (≤35 Ltrs) and up to 6 Bar (≤1000 Ltrs). Ideal for sealed heating and chilled-water systems, plus refrigeration and industrial cooling.

The Mikrofill MikroPro 400/2 is a space saving, compact sealed system pressurisation bundle for LPHW/CHW applications. It pairs the Mikrofill 3 advanced direct-type pressurisation unit (cold fill up to 4.7 Bar), a pair of MikroPro 200 Ltrs (6 Bar) expansion vessels, and a ¾" quick-fit service valve.

The direct-fill design connects to the mains/boosted supply to automatically fill and top-up the system. A digital control system with LCD display simplifies setup, while a high-flow WRAS-approved fill valve, low energy use (10 Watts standby / 30 Watts running) and a fill volume indicator support efficient operation and water-treatment calculations.

• Direct-type pressurisation cold fill to 4.7 Bar
• MikroPro dual expansion vessels, rated to 6 Bar
• Automatic system fill & top-up with LCD interface
• WRAS-approved high-flow fill valve