The Clarke - ECP15A1 1.5" Electric Centrifugal Pump (230V)

Suitable for a wide range of domestic, industrial and agricultural clear liquid applications. Not self-priming.

The Tsurumi - KPM80 Centrifugal Pump - 19-15-1080 (SKU 19-15-1080) is a robust and efficient peripheral pump designed for industrial and domestic Uses requiring high pressure with relatively low power consumption. This single-phase, 230V model is part of Tsurumi's KP(M) series of industrial peripheral pumps, renowned for their steady operating curves and reliability.

The KP(M) pumps are non self-priming, peripheral centrifugal pumps with Cast Iron pump bodies. Capable of high heads and pressures in domestic and industrial Uses.

Optional pressure controller will provide dry-run protection and automatic operation. (sold separately)

Performance

• Flow rate: 50 litres per minute
• Maximum head: 55 metres
• Power: 0.60 kW

Sizing and Weight Information

• Inlet/Outlet: 1" (BSPF)
• Width: 135 mm
• Length: 295 mm
• Height: 161 mm
• Dry weight: 9.5 kg

Electrical

• Frequency: 50 Hz (assumed based on standard European specifications)

The KPM80 is suitable for various Uses, including:

• Increasing system pressure in aqueducts
• Automatic water distribution in small autoclave tanks
• Domestic water pressure boosting
• Industrial processes requiring consistent high-pressure

• Liquid temperature: Up to 60°C
• Ambient temperature: Up to 40°C
• Total suction lift: Up to 7 metres
• Duty cycle: Continuous

The pump is built with durability in mind, featuring:

• Cast Iron pump body
• Brass impeller
• Stainless Steel shaft
• Ceramic/graphite mechanical seal

This construction ensures the pump can handle clean water and non-aggressive liquids without sand or other solid impurities.

The Clarke - CEB103 Centrifugal Brass Body Water Pump - 230V

1" 230V Centrifugal Brass body water pump - A medium duty centrifugal water pump with a non-corrosive brass pump body and dependable 230V motor. It is ideal for a vast range of clear water pumping applications including emptying and filling ponds, pools and troughs

Single Stage Cast Iron Unit (1HP)

The STUART CH3-30 CI Cast Iron pump is a space-saving, high performance pump designed for continuous operation and will deliver flow rates up to 120 litres per minute and heads up to 32 metres.

Peripheral centrifugal pumps for use in residential building service engineered for pressurization, rainwater reuse and gardening and irrigation. This product is manufactured by Dab. KPF has the threaded inlet on the front. Air-cooled asynchronous motor. Brass impeller. Motor shaft in AISI 416 Stainless Steel. Motor circuit breaker and permanent capacitor included as standard in the single-phase version. Protection by the user for the three-phase versions.

Construction Includes Of The Pump

KPF has the threaded inlet on the front. Carbon-ceramic mechanical seal. Brass impeller.

Construction Features Of The Motor

Air-cooled asynchronous motor. Motor shaft in AISI 416 Stainless Steel.Motor circuit breaker and permanent capacitor included as standard in the single-phase version.Protection by the user for the three-phase versions.

The DAB KPF 30/16 M Centrifugal Peripheral Pump - 240v - Single Phase - 50 Ltr/min. is a Peripheral Pump item. Voltage for this item is 240V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 84m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The Ebara - CMA 0.50 M Centrifugal Pump - - Single Phase - 90 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA 0.50 M (Brass Impeller) Centrifugal Pump - Single Phase - 90 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA 0.50 T Centrifugal Pump - Three Phase - 90 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Tsurumi - GAM100 Centrifugal Pump - 19-15-1071 - 230V - Single Phase (SKU 19-15-1071) is a versatile and efficient pumping solution for various industrial and agricultural Uses. This non-self-priming, single-stage centrifugal pump is equipped with an open impeller, making it suitable for handling slightly dirty, non-aggressive liquids.

GA(M)100 is a non self-priming, single-stage, centrifugal pump. With an open impeller, it can pump non-aggressive liquids, which are slightly dirty and is designed for irrigation and general circulation, in industrial Uses. Optional pump control and energy management systems are available ().

dynamic performance:

• Maximum flow rate: 260 l/min
• Maximum head: 17 metres

Motor:

• Power output: 0.75 kW
• Voltage: 230V (single-phase)

Connections:

• Inlet: 1½" BSPF
• Outlet: 1½" BSPF

Sizing and Weight Information:

• Width: 182 mm
• Length: 311 mm
• Height: 232 mm
• Dry weight: 15 kg

The GAM100 is designed for continuous duty and can operate in ambient temperatures of up to 40°C. It has a maximum suction lift of 8 metres when equipped with a foot valve.

Suitable fluids:

• Clean water
• Slightly dirty water
• Temperature range: 0 - 90°C

Uses:

• Industry
• Agriculture
• Horticulture
• Transfer
• Circulation

The pump features durable components to ensure reliable dynamic performance:

• Cast Iron pump body
• Brass impeller
• AISI 304 Stainless Steel motor shaft
• Ceramic/Graphite/NBR mechanical seals

With its robust construction and versatile capabilities, the Tsurumi - GAM100 Centrifugal Pump is an excellent choice for various pumping needs in industrial and agricultural settings.

The Ebara - CMA 0.50 T (BRASS IMPELLER) Centrifugal Pump - Three Phase - 90 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA 1.00 M Centrifugal Pump - - Single Phase - 95 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA/A 0.75 M Centrifugal Pump - Single Phase - 85 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

Peviously known as RGP120. This product is manufactured by Salamander. An innovative range of single outlet pumps. Compact and smooth running with sustained flow. Supplied with 22mm isolating valve AV couplers.

The RP120PS is the ideal single outlet pump to boost supplies to a variety of positive head applications including single wash basin, bath, shower and kitchen taps, and is also appropriate for use with Victorian Can shower heads, multi-function showers, massage functions and champagne sprays.

This pump can additionally serve upto 4 body jets.

The Salamander RP120PS Positive Head Centrifugal Shower Pump - 3.6 bar. - Single Impeller - OBSOLETE is a Shower Pump item.

The operating pressure of this is 3 bar.

Product Applications

The DAB KPS 30/16 T Is a centrifugal peripheral pump engineered to be applied in domestic and residential environments for pressurization, rainwater reuse or gardening and irrigation. This product is manufactured by Dab.

Construction Includes Of The Pump

KPS has the pump body in cataphoresis Cast Iron, threaded inlet on the side. Cast Iron support with brass shaving plate for KPS 30/16 and KPS 38/18 models. Carbon-ceramic mechanical seal. Brass impeller.

Construction Features Of The Motor

Air-cooled asynchronous motor. Motor shaft in AISI 416 Stainless Steel. Motor circuit breaker and permanent capacitor included as standard in the single-phase version. Protection by the user for the three-phase versions.

The DAB KPS 30/16 T Centrifugal Peripheral Pump - 415v - Three Phase - 50 Ltr/min. is a Peripheral Pump item. Voltage for this item is 400V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 84m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.