By Range
-
60231351
Dab - Evoplus 40/180 M Electronic Circulator - 230v - Single Phase - Threaded Connection - 4m HeadDab - Evoplus 40/180 M Electronic Circulator - 230v - Single Phase - Threaded Connection - 4m Head is an electronic circulator for heating and chilled water circulation duties.
In stock
Free Standard Delivery
-
In stock
Free Standard Delivery
-
In stock
Free Standard Delivery
-
SGR-96405861
Grundfos - UPS 50-180/2 & 65-120/2 Replacement Termin.al Box - Single Phase - 230VGrundfos UPS 50-180/2 65-120/2 Replacement terminal box only, 1ph 230v 50Hz.
In stock
Free Standard Delivery
-
GR-95906774
Grundfos - UPS 40-80FN Domestic Hot Water Circulator Pump - Stainless SteelUPS 40-80 FN 250
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic shaft and radial bearings
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
In stock
Free Standard Delivery
-
GR-98057242
Grundfos - UPS 40-50FN Domestic Hot Water Circulator Pump - Stainless SteelUPS 40-50 FN 250
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic shaft and radial bearings
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
In stock
Free Standard Delivery
-
In stock
Free Standard Delivery
-
GR-98057247
Grundfos - UPS 32-80N 180 Light Commercial Circulator - Stainless SteelUPS 32-80 N 180
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic shaft and radial bearings
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
In stock
Free Standard Delivery
-
95906773
Grundfos - UPS 32-55 N 180 Light Commercial Circulator - 230V - Stainless SteelUPS 32-55 N 180
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic shaft and radial bearings
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
In stock
Free Standard Delivery
-
GR-98057249
Grundfos - UPS 32-100N Hot Water Service Circulator - 240V - Stainless SteelUPS 32-100 N 180
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic radial bearing assembly
- Stainless Steel shaft
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
In stock
Free Standard Delivery
-
GR-98057227
Grundfos - UPS 25-80N (180) Hot Water Circulator Pump - 240V - Stainless SteelUPS 25-80 N 180
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic shaft and radial bearings
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
In stock
Free Standard Delivery
-
GR-95906772
Grundfos - UPS 25-55N Hot Water Service Circulator - 240V - Stainless SteelUPS 25-55 N 180
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic shaft and radial bearings
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
In stock
Free Standard Delivery
-
GR-97549426
Grundfos - UPS 15-50N Domestic Hot Water Service Pump Circulator - 230V - Stainless SteelUPS 15-50 N 130
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic shaft and radial bearings
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
In stock
Free Standard Delivery
-
96110405
Grundfos - TPE 100-370/4 A-F-A-BQQE-PX3 Variable Speed In-Line Circulator Pump - 415V - Three Phase - 3269 Ltr/min. - OBSOLETE - Cast IronTPE 100-370/4 A-F-A-BQQE-PX3
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
Out Of StockFree Standard Delivery
-
GR-98707848
Grundfos - UPS2 25-80 Heating Circulator Pump - 240V - Cast IronGrundfos central heating circulators cover a wide selection of circulator pumps designed for circulating liquids in heating systems, including modern high-efficiency electronic circulators and legacy three-speed models (range dependent).
In stock
Free Standard Delivery
GR-98707851
Grundfos - UPS2 32-80 Heating Circulator Pump - 240V - 180mm - Cast IronUPS2 32-80 180
High-efficiency circulator pump unit with permanent-magnet motor (ECM technology) fit for the ErP directive no. 641/2009 due to continuous variable-speed control for circulation of clean heating water according to VDI 2035.
Features and benefits: UPS2 32-80 180
High-efficiency circulator pump with permanent-magnet motor (ECM technology) complying with the ErP directive no. 641/2009 thanks to continuous variable-speed control. appropriate for circulation of clean heating water according to VDI 2035.
Features and benefits:
- reduced installation costs as no external motor protection is required
- no corrosion issues thanks to the electrocoated pump housing
- one button for uncomplicated selection among three proportional-pressure curves or three fixed speeds
- complies with the German regulation on energy saving in buildings and building systems – Energieeinsparverordnung – EnEV §14(3)
- high energy savings thanks to an energy efficiency index (EEI) lower than 0.23
- for tight installations, in, for example, boiler applications
- it is available as pump head without pump housing. Fits all 4-m, 5-m and 6-m pump housings of the Series 100
- one pump replaces three variants
- complies with the requirements of the ErP directive as from 2015
Suitable for: Commercial heating
In stock
Free Standard Delivery
Central Heating Pumps
Central heating pumps circulate hot water from your boiler through radiators or underfloor heating and back again, ensuring consistent warmth throughout your property. As water moves through the system, it loses heat to the rooms, then returns to the boiler to be reheated, creating a continuous, efficient loop.
Modern central heating pumps are designed for energy efficiency and quiet operation. Many feature wet rotor motors with variable speed control, allowing them to adapt automatically to the demands of your heating system. This not only keeps your property comfortably warm but also helps reduce energy consumption and running costs.
Pumpify stocks a wide range of central heating pumps and circulators from big-name brands like Grundfos, DAB, Wilo, and Smedgaard. Whether you need a replacement pump or an upgrade to a high-efficiency model, you've come to the right place.




















