By Range
-
Here’s our selection of DAB central heating p ...
-
Here’s our sel ...
-
Here’s our selection of Lowara central heatin ...
-
Smedgaard Central Heating Pumps are in-line cir ...
-
Here’s our se ...
-
96096607
Grundfos - TPE 65-720/2 A-F-A-BQQE-QX1 Inline Single Stage Circulator Pump - 480v - Three Phase - Cast IronTPE 65-720/2 A-F-A-BQQE-QW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
£24,262.80 RRP £15,770.82 £13,142.35
2 week lead time
Free Standard Delivery
-
96397055
Grundfos - TPE 65-720/2 S-A-F-A-BQQE-QX1 Inline Single Stage Circulator Pump - 480v - Three Phase - Cast IronTPE 65-720/2 S-A-F-A-BQQE-QW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£25,580.40 RRP £16,627.26 £13,856.05
2 week lead time
Free Standard Delivery
-
99113947
Grundfos - TPE 80-180/2 A-F-A-BQQE-JDB Inline Single Stage Circulator Pump - 500v - Three Phase - Cast IronTPE 80-180/2 A-F-A-BQQE-JWB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
£7,491.60 RRP £4,869.54 £4,057.95
2 week lead time
Free Standard Delivery
-
99114674
Grundfos - TPE 80-180/2 S-A-F-A-BQQE-JDB Inline Single Stage Circulator Pump - 500v - Three Phase - Cast IronTPE 80-180/2 S-A-F-A-BQQE-JWB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£8,820.00 RRP £5,733.00 £4,777.50
2 week lead time
Free Standard Delivery
-
99113948
Grundfos - TPE 80-210/2 A-F-A-BQQE-KDB Inline Single Stage Circulator Pump - 500v - Three Phase - Cast IronTPE 80-210/2 A-F-A-BQQE-KWB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
£8,464.80 RRP £5,502.12 £4,585.10
2 week lead time
Free Standard Delivery
-
99114719
Grundfos - TPE 80-210/2 S-A-F-A-BQQE-KDB Inline Single Stage Circulator Pump - 500v - Three Phase - Cast IronTPE 80-210/2 S-A-F-A-BQQE-KWB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£9,787.20 RRP £6,361.68 £5,301.40
2 week lead time
Free Standard Delivery
-
99113949
Grundfos - TPE 80-240/2 A-F-A-BQQE-LDB Inline Single Stage Circulator Pump - 500v - Three Phase - Cast IronTPE 80-240/2 A-F-A-BQQE-LWB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
£9,265.20 RRP £6,022.38 £5,018.65
2 week lead time
Free Standard Delivery
-
99114720
Grundfos - TPE 80-240/2 S-A-F-A-BQQE-LDB Inline Single Stage Circulator Pump - 500v - Three Phase - Cast IronTPE 80-240/2 S-A-F-A-BQQE-LWB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£10,586.40 RRP £6,881.16 £5,734.30
2 week lead time
Free Standard Delivery
-
99113950
Grundfos - TPE 80-250/2 A-F-A-BQQE-MDB Inline Single Stage Circulator Pump - 500v - Three Phase - Cast IronTPE 80-250/2 A-F-A-BQQE-MWB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
£11,586.00 RRP £7,530.90 £6,275.75
2 week lead time
Free Standard Delivery
-
99114721
Grundfos - TPE 80-250/2 S-A-F-A-BQQE-MDB Inline Single Stage Circulator Pump - 500v - Three Phase - Cast IronTPE 80-250/2 S-A-F-A-BQQE-MWB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£12,914.40 RRP £8,394.36 £6,995.30
2 week lead time
Free Standard Delivery
-
99113951
Grundfos - TPE 80-330/2 A-F-A-BQQE-NDB Inline Single Stage Circulator Pump - 500v - Three Phase - Cast IronTPE 80-330/2 A-F-A-BQQE-NWB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
£15,720.00 RRP £10,218.00 £8,515.00
2 week lead time
Free Standard Delivery
-
96275644
Grundfos - TPE 80-400/2 S-A-F-A-BQQE-OX1 Inline Single Stage Circulator Pump - 480v - Three Phase - Cast IronTPE 80-400/2 S-A-F-A-BQQE-OW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£18,409.20 RRP £11,965.98 £9,971.65
2 week lead time
Free Standard Delivery
-
96110066
Grundfos - TPE 80-520/2 A-F-A-BQQE-PX1 Inline Single Stage Circulator Pump - 480v - Three Phase - Cast IronTPE 80-520/2 A-F-A-BQQE-PW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
£20,828.40 RRP £13,538.46 £11,282.05
2 week lead time
Free Standard Delivery
-
96397058
Grundfos - TPE 80-520/2 S-A-F-A-BQQE-PX1 Inline Single Stage Circulator Pump - 480v - Three Phase - Cast IronTPE 80-520/2 S-A-F-A-BQQE-PW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£22,156.80 RRP £14,401.92 £12,001.60
2 week lead time
Free Standard Delivery
-
96110067
Grundfos - TPE 80-570/2 A-F-A-BQQE-QX1 Inline Single Stage Circulator Pump - 480v - Three Phase - Cast IronTPE 80-570/2 A-F-A-BQQE-QW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
£24,698.40 RRP £16,053.96 £13,378.30
2 week lead time
Free Standard Delivery
-
96397061
Grundfos - TPE 80-570/2 S-A-F-A-BQQE-QX1 Inline Single Stage Circulator Pump - 480v - Three Phase - Cast IronTPE 80-570/2 S-A-F-A-BQQE-QW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£26,025.60 RRP £16,916.64 £14,097.20
2 week lead time
Free Standard Delivery
Central Heating Pumps
Central heating pumps circulate hot water from your boiler through radiators or underfloor heating and back again, ensuring consistent warmth throughout your property. As water moves through the system, it loses heat to the rooms, then returns to the boiler to be reheated, creating a continuous, efficient loop.
Modern central heating pumps are designed for energy efficiency and quiet operation. Many feature wet rotor motors with variable speed control, allowing them to adapt automatically to the demands of your heating system. This not only keeps your property comfortably warm but also helps reduce energy consumption and running costs.
Pumpify stocks a wide range of central heating pumps and circulators from big-name brands like Grundfos, DAB, Wilo, and Smedgaard. Whether you need a replacement pump or an upgrade to a high-efficiency model, you've come to the right place.