The HSE200A is suitable for pumping both dirty and clean water. It is also ideal for pools, fish pond circulation*, rain water drainage, waterfall fountains, garden spraying, sump pits and waste water drainage. The HSE 200A features a robust cast iron base.

• Includes filter base, outlet connector and 10m of heavy duty HO7RNF cable.
• Powerful 420 Watts, 230v motor
• Max.

Clarke Hippo 2 Domestic Submersible Pump - 110V is a robust and reliable submersible pump, engineered with power and efficiency in mind.

• Max. flow rate 85lpm
• Maximum head (lift height) 6m
• Can pump to within 3mm of floor (when initially set in water 12.75mm deep or more)
• Thermal overload protection
• Tough non-corrosive polypropylene pump body
• Complete with ½", ¾" and 1" hose adaptor and 10m waterproof cable
• 250 Watts, 110V motor

Clarke Hippo 2 Domestic Submersible Pump - 230V is a robust and reliable submersible pump, engineered with power and efficiency in mind.

• Max.

Clarke Hippo 2A Submersible Pump - With Float Switch is a robust and reliable submersible pump, engineered with power and efficiency in mind.

• Max. flow rate 85L/min
• Maximum head (lift height) 6m
• Can pump to within 3mm of floor
• Auto start / stop float switch
• Thermal overload protection
• Complete with ½", ¾" and 1" hose adaptor and 10m waterproof cable
• 250 Watts, 230V motor

Clarke HSEC 650A Submersible Sewage Cutter Pump - 230v is a robust and reliable submersible pump, engineered with power and efficiency in mind.

• Max flow rate 290 litre/min
• Handles soft solids up to 15mm
• Cast iron robust pump
• 665 watts, 230v
• 2inch outlet

Clarke's truly heavy duty, industrial quality submersible dirty water cutter pump benefits from a corrosion resistant stainless steel drive shaft and body.

It also has a sharpened, tungsten carbide cutter plate to chop and reduce any water borne sewage or vegetation.

This enables the HSEC650A pump to happily pump dirty water, even sewage water, all day long and for cost-conscious, economic operation it’s also switched on and off automatically, thanks to the inclusion of a simple but effective float switch - as the water level rises this activates the pump, and turns it off once desired water level has been reached.

Clarkes truly heavy duty, industrial quality submersible pump benefits from a corrosion resistant stainless steel drive shaft and body.

It also has a sharpened, tungsten carbide cutter plate to chop and reduce any water borne sewage or vegetation.

This enables the HSEC651A to happily pump dirty water, even sewage water, all day long and for cost conscious, economic operation, it’s also switched on and off automatically, thanks to the inclusion of a simple but effective float switch – as the water level rises this activates the pump; and turns it off once desired water level has been reached.

• Max.

Clarke SPE800 Self Priming Pump - 1 inch - 230V is a robust and reliable selfpriming pump, engineered with power and efficiency in mind.

• Maximum output 53 l/min
• Maximum head 40m
• 800 Watt, 230V motor
• Corrosion and rust proof construction
• Self priming
• Includes 1” output elbow, integral carry handle, electric cable with plug and water resistant on/off switch

Clarkes powerful and rugged industrial quality submersible pump has a stainless steel drive shaft and chrome plated body, plus a 50mm (2") diameter outlet.

• Max. flow rate 300 l/min
• Maximum head (lift height) 10m
• Can pump small solids in suspension
• Robust cast iron base with filter
• Auto start / stop float switch
• Includes outlet connector and 10m of H07RNF cable
• 720 Watts, 230V motor
• 2" BSP Outlet

• 250W 230V motor
• 3 position auto sensor allows remaining water level to be set
• Outlet:1.5" BSP with non-return valve.
• Outlet adaptor; 1" BSP, 1" hose,1 ½" hose
• 100l/min rated maximum flow rate
• 0m/6m Min/max head
• Max depth 5m
• Cable length 10m
• Weight 4kg

Clarke DWP 200A Submersible Pump - 230v is a robust and reliable submersible pump, engineered with power and efficiency in mind.

• Float switch operation
• Corrosion resistant stainless steel casing and cast iron base for long reliable service
• Handle solids in suspension up to 7mm in diameter
• Hose Outlet 2"
• Max delivery 600l/m
• Max head 10m
• Input power 1500W
• 230V 50Hz supply.
• Cable length 10m
• Weight 21kg

Clarke PSP125B Puddle Pump - With Auto Sensor 230v is a robust and reliable submersible pump, engineered with power and efficiency in mind.

• 230v, 400W
• 1.5" BSP outlet
• 116l/min flow rate
• 7m max head
• Cable length 10m

Buy the Clarke SPPT1 from Pump Sales Direct and receive free standard delivery.

This pumps timer is programmable for 2 - 24 hour operation.

Pump is complete with a corrosion resistant casing. 

The pumps elevated mount keeps the motor away from moisture.

Get free standard delivery when buying the Clarke SPP15A Swimming Pool Pump from Pump Sales Direct.

This self-priming swimming pool pump features a tough corrosion resistant case.

The Clarke SPP15A Swimming Pool Pump comes complete with pre-filter basket, 60-61mm multi step inlet and outlet hose adaptors.

The Clarke CWBP300 ¾" 400W 36Lpm 11m Head Water Butt Pump (230V) - 7230400. This fluid device delivers a simple means to extract water from butts and can be used with chlorinated swimming pool water. An ideal garden tool the CWBP300 can be adjusted in length for use with butts of different sizes and its 3/4'' BSP threaded outlet has a quick fit hose connection.

The Clarke PSV3A 1½" 400W 133Lpm 8m Head Dirty Water Submersible Pump with Float Switch (230V) - 7236042. Perfect for heavy duty draining applications including pits, sumps, ditches, footings etc. Shifts both clean and dirty fluid including particles upto 35mm dia.

Ideal for heavy duty draining applications including pits, sumps, ditches, footings etc. Shifts both clean and dirty water including particles upto 35mm dia. Fitted with a float switch for automatic water level control.