ABS

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

The ABS Sulzer MF404 DKS Submersible Pump - 10m Cable is a Submersible product. This product is manufactured by ABS. Voltage for this item is 400V. It is supplied with a 10m cable.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

The ABS Sulzer MF404 DKS Submersible Pump - 3m Cable is a Submersible product. This product is manufactured by ABS. Voltage for this item is 400V. It is supplied with a 3m cable.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

Simple, cost-effective, pump installation.

Vortex hydraulics for blockage-free pumping in critical applications.

Discharge connections G 11/4"-G 2" internal thread and DN 65 flange.

Mechanical and lip seals on rotor shaft. This product is manufactured by ABS. Thermal sensors to protect motor against overheating.

EasyFit plug-in cable connection.

Single-phase fitted with Schuko plug; three-phase with CEE plug.

The ABS Sulzer MF504 WKS Submersible Pump is a Submersible product. It is supplied with a 10m cable.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

Applications MF submersible pumps have been engineered to cover a wide range of internal and external dewatering applications.

Filling and emptying of containers to the drainage of flooded cellars and removal of rainwater.

Appropriate for use in septic tanks and pumping effluent from locations below the backwash level in accordance with EN 12056.

For locations such as building sites, the MF 354, MF 504 & MF 804 are available in a VO version, featuring a protective screen, elbow and hose coupling.

The vortex hydraulics are particularly appropriate for the pumping of fluids containing gaseous or abrasive particles.

The compact shape of the MF, fittings for easy mounting, and small sump requirements ensure a quick and cost-effective installation of the pump.

The ABS Sulzer MF154W/KS Submersible Pump - Automatic is a Submersible product. This product is manufactured by ABS. Voltage for this item is 230V. It has an actual flow rate of 200 Ltr/min. The maximum head for this pump is 11m.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

Single phase sump and drainage pump with 1 1/2" threaded discharge port and 10m cable. This product is manufactured by ABS. The ABS MF range are submersible pumps with vortex impellers engineered to allow a large free passage of solids. They are designed to allow straightforward dewatering of buildings, particularly flooded cellars, and also pedestrian underpasses.

The ABS Sulzer MF324W Submersible Pump - 240v is a Submersible product. Voltage for this item is 240V. It is supplied with a 10m cable. It has an actual flow rate of 240 Ltr/min. The maximum head for this pump is 10m.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

The ABS Sulzer MF334D Submersible Pump - 400v - Three Phase is a Submersible product. This product is manufactured by ABS. Voltage for this item is 400V. It is supplied with a 10m cable. It has an actual flow rate of 300 Ltr/min. The maximum head for this pump is 10m.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

The ABS Sulzer MF354W Submersible Pump - 230v - Single Phase - 333 Ltr/min. is a Submersible product. This product is manufactured by ABS. Voltage for this item is 230V. It has an actual flow rate of 333 Ltr/min. The maximum head for this pump is 10m.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

The ABS Sulzer MF404D Submersible Pump - 400v - Three Phase - 333 Ltr/min. is a Submersible product. This product is manufactured by ABS. Voltage for this item is 400V. It is supplied with a 10m cable. It has an actual flow rate of 333 Ltr/min. The maximum head for this pump is 10m.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

The ABS Sulzer MF804 D01-10-YKPM Submersible Pump - 400v - Three Phase - 550 Ltr/min. is a Submersible product. This product is manufactured by ABS. Voltage for this item is 400V. It has an actual flow rate of 550 Ltr/min. The maximum head for this pump is 16m.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

The ABS Sulzer MF565 Submersible Pump - Manual - 230v is a Submersible product. This product is manufactured by ABS. Voltage for this item is 230V. It is supplied with a 10m cable.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

The ABS Sulzer MF665D Submersible Pump - Without Float - 400v is a Submersible product. This product is manufactured by ABS. Voltage for this item is 400V. It is supplied with a 10m cable. It has an actual flow rate of 930 Ltr/min. The maximum head for this pump is 9m.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

The ABS Piranahmat 100-W01*2 Faecal Pumping Unit - 230v is a Spares item. This product is manufactured by ABS. Voltage for this item is 230V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The ABS Piranahmat 120-W01*2 Faecal Pumping Unit - 230v is a Spares item. This product is manufactured by ABS. Voltage for this item is 230V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.