The Clarke - XEV16/100 (OL) 14cfm 100Ltr 3HP Industrial Air Compressor (230V)

The Clarke XEV16 range of air compressors are British built for performance and reliability.

This quality belt driven air compressor with V twin pump is designed with industrial & commercial users in mind. With the air capacity & power, to drive many of the most commonly used air tools, it will satisfy the air requirements of garages, small factories, workshops and farms.

And it benefits from an aerodynamic bladed flywheel, positive splash-feed piston lubrication, V twin unit and twin Cast Iron cylinders; all lead to effective & cool running, smooth operation and extended life.

It is recommended that this air compressor is fitted with heavy-duty anti-vibration floor mountings.

The Clarke - XEV16/200 (OL) 14cfm 200Ltr 3HP Industrial Air Compressor (230V)

The Clarke XEV16 range of air compressors are British built for performance and reliability.

This quality belt driven air compressor with V twin unit is designed with industrial & commercial users in mind. With the air capacity, & power, to drive many of the most commonly used air tools, it will satisfy the air requirements of garages, small factories, workshops and farms.

And it benefits from an aerodynamic bladed flywheel, positive splash-feed piston lubrication and Cast Iron cylinders; all lead to effective & cool running, smooth operation and extended life.

It is recommended that this air compressor is fitted with heavy-duty anti-vibration floor mountings (available separately).

This compressor must be run from a 30Amp supply minimum.

The Clarke - Harry 2 Hot Wash Pressure Washer - 145 Bar. pressure - 230V

This highly small portable hot and cold high pressure washer is great for really effective cleaning of vehicles, caravans, bikes, patios, etc.

With a hot jet of high pressure liquid, this unit rapidly dissolves dirt or grime with ease.

The Harry 2 Hot Wash is also straightforward to transport and store due to its upright design and compact size.

Combined with its economical diesel powered water heating assembly, it is ideal for when time is of the essence.

The Harry II is provided with an extra-long 8m high pressure hose, fitted with a hose and lance holder, combined with handy wheels for easier movement and includes a 300ml detergent dispenser bottle.

The Clarke - CBT1300SS 1" 1350W 90Lpm 35m head Stainless Steel Booster Pump - 230V - Single Phase - 90 Ltr/min. The CBT1300SS is a high specification, Stainless Steel bodied corrosion and rust proof pump, ideal for boosting or maintaining water pressure for cold, clear water. THE CBT1300SS is a self-priming pump equipped with an automatic pressure switch. It features a robust 1350W motor offering a high 90L/min flow rate, is equipped with a large 24 Ltr tank for continuous pressure, a pressure gauge, and a 1.5m cable with fitted plug. Plus, this pump is supplied with the Clarke PF1 inlet filter to keep the output cleaner, reducing wear-and-tear, and keeping your pump working for longer.

The Clarke - CBP900 Multistage Booster Pump - 230V - Single Phase - 97 Ltr/min.

The Clarke CB900 is a powerful 900W multi-stage booster pump, excellent for boosting or maintaining mains water pressure. The CBP900 is also great for pumping clear liquid and includes built-in self-activating control (EPC) with LED indicator lights, featuring an auto-start function when the liquid pressure goes below 1.5Bar.

The Clarke - CPRP560 - Submersible Water-Cooled Residue Water Pump - 230V - Single Phase - 170 Ltr/min.

With a Stainless Steel body and unique water cooling system the CPRP560 Residue Water Pump can be utilised for both clean and contaminated water applications. This pump can shift water containing particles up to 7mm dia and features the ability to clear residue water down to 1mm making it ideal for removing water from floors, low level pools and puddles.

The Clarke - CHHDP830 High-Head Drainage Pump - 230V - Single Phase - 180 Ltr/min.

With a Stainless Steel body and robust 830W drive offering an 180 l/min flow rate and a lift height of 20m, the CHHDP830 High Head Draining Pump can pump clear and dirty water including solids with a diameter up to 8mm. This draining pump is fitted with non-clogging vortex impeller and offers high-lift waste water transport, making it ideal for DIY or trade purposes to use in pits, trenches, tunnels and liquid tanks with slurry.

The Clarke - CPCDP500 Portable Contractor Dewatering Pump - 230V - Single Phase - 240 Ltr/min.

The Clarke CPCDP500 Contractor Dewatering Pump offers a robust and portable design, suitable for DIY and Trade purposes in pits, trenches, tunnels and liquid tanks with slurry. This pump is fitted with a 500W drive, offering a 240 l/min flow rate, engineered for shifting clean and dirty water including solids up to 7mm. The CPCD500 is manufactured with a Stainless Steel drive shaft, impeller and base plate ensuring a longer life time, plus it is completed with a convenient carry handle for straightforward transport.

The Clarke - CGP870 Cast Iron Sewage & Dirty Water Grinder Pump - 230V - Single Phase - 140 Ltr/min.

With a Cast Iron body and powerful 870W drive, the CGP870 Grinder Pump is the ideal pump for the grinding and disposal sewage and waste water. The pump body is protected by a hard-wearing dual-layer coating to avoid any risk of leaks. Plus, the pump also features thermal cut-out overload protection.

The Clarke - CSP1530 Cast Iron Sewage & Dirty Water Pump - 230V- Single Phase - 500 Ltr/min.

With a Stainless Steel body, Cast Iron foundation and robust 1530W drive offering an impressive 500 l/min flow rate, the CSP1530 Sewage Pump can pump clean and dirty water including solids with a diameter up to 50mm. This sewage pump is ideal for DIY or trade purposes to use in pits, trenches, tunnels and water tanks with slurry.

The Clarke - CBT1400SS 1" 1650W 90Lpm 50m head Stainless Steel Booster Pump - 230V - Single Phase - 90 Ltr/min.

The Clarke CBT1400SS 1" 1650W 90Lpm 50m Head Stainless Steel Booster Pump (230V) is a elevated specification, powerful and robust booster pump built with a Stainless Steel body, motor shaft and impeller to prevent rust and corrosion. The CBT1400SS is ideal for boosting or maintaining the water pressure of cold, clean liquid thanks to its powerful 1650W drive. Self-priming after an initial priming, the booster pump also features a 24L storage pressure tank so that when a tap is turned on, the water stored under pressure is used first.

The CBT1400SS also features an automatic pressure switch, so that when pressure drops, the booster pumps turns on until pressure is built up to the 5.0Bar cut-off point where it then automatically switches off. As pressure in the system reduces, the booster pump will then switch on, to increase pressure back to the cut-off point. All of this, along with a huge flow rate of 90L/min and a non-return valve, ensures that water pressure is maintained at optimal levels, giving a constant and reliable increase in water pressure around the home, workshop or garage.

The Clarke CBT1400SS 1" 1650W 90Lpm 50m Head Stainless Steel Booster Pump (230V) also includes a Clarke PF1 inlet water filter to keep the output clean, reducing wear-and-tear on the pump, ensuring a longer working life and reducing repair costs throughout the product's life cycle.

The Clarke - EPC2200 Booster Pump Electronic Control Unit - 1.1KW - 230V

The EPC2200 Electronic Control Unit is an in-line electronic device engineered to be used with booster pumps in order to maintain water pressure from the pumps by instantly sensing water usage & automatically starting the pump depending on demand. It is also able to sense when no water is available for the pump, cutting it out and preventing dry running which will damage the booster pump. The ECU benefits from an self-activating mode that turns on the pump when water is needed and when operating, an LED illuminates to inform the user of the pumps operation.

However, when there is no water available for the booster pump, a failure LED flashes, alerting the user of a fault within the system.A manual mode is also offered by the ECU, which will start or stop the booster pump based on pressures within the system. This setting can be set in increments, so that the pump is switched on when water pressure falls below a minimum level and cutting it out when it reaches beyond the maximum pressure as stipulated by the user. The manual setting also benefits from a wider pressure range, from 0.5Bar to 6Bar.The ECU also features a digital display which displays in real-time the pressure within the system, helping to identify if there is an issue with pressure being too elevated or low.

The Clarke - EPC1200 Booster Pump Electronic Control Unit - 1.1KW - 230V

The EPC1200 Electronic Liquid Pump Control Unit is an in-line electronic device engineered to maintain liquid pressure from booster pumps by instantly sensing liquid usage & automatically starting or stopping the pump. This pump is kept safe by over-voltage and dry-run protection, switching the pump off when there is no flow to prevent damage to the pump.

The Clarke - MSP490 Stainless Steel Multi Stage Booster Pump - 90Lpm - 43m Head

The Clarke MSP490 is a robust 850W multi-stage booster pump that delivers an impressive 90L/min making this pump ideal for boosting or maintaining mains water pressure in homes, offices and workshops up to a pressure of 4.3bars.

The premium construction of this robust and hardworking pump is WRAS approved, which makes it suitable for use with drinking liquid supplies, whilst the pumps Stainless Steel impellor ensures that the impellor is rust and corrosion resistant, providing the benefit of a long service life. The thermal protector built in to the pump guarantees safety, cutting out the pump when it becomes overloaded, preventing damage to the unit, assembly and the surroundings.

The Clarke - MSP590 Stainless Steel Multi Stage Booster Pump - 90Lpm - 53m Head

The Clarke MSP590 is a powerful 1050W multi-stage booster pump that delivers an impressive 90L/min making this pump ideal for boosting or maintaining mains water pressure in homes, offices and workshops up to a pressure of 5.3bars.

The premium construction of this robust and hardworking pump is WRAS approved, which makes it suitable for use with drinking water supplies, whilst the pumps Stainless Steel impellor ensures that the impellor is rust and corrosion resistant, providing the benefit of a extended service life. The thermal protector built in to the pump guarantees protection, cutting out the pump when it becomes overloaded, preventing damage to the unit, system and the surroundings.

The Clarke - MSP690 Stainless Steel Multi Stage Booster Pump - 90Lpm - 64m Head

The Clarke MSP690 is a powerful 1300W multi-stage booster pump that delivers an impressive 90L/min making this pump ideal for boosting or maintaining mains water pressure in homes, offices and workshops up to a pressure of 6.4bars.

The premium construction of this robust and hardworking pump is WRAS approved, which makes it suitable for use with drinking liquid supplies, whilst the pumps Stainless Steel impellor ensures that the impellor is rust and corrosion resistant, providing the benefit of a long service life. The thermal protector built in to the pump guarantees protection, cutting out the pump when it becomes overloaded, preventing damage to the unit, system and the surroundings.