Clarke Hippo 2 Domestic Submersible Pump - 110V is a robust and reliable submersible pump, engineered with power and efficiency in mind.

• Max. flow rate 85lpm
• Maximum head (lift height) 6m
• Can pump to within 3mm of floor (when initially set in water 12.75mm deep or more)
• Thermal overload protection
• Tough non-corrosive polypropylene pump body
• Complete with ½", ¾" and 1" hose adaptor and 10m waterproof cable
• 250 Watts, 110V motor

Clarke Hippo 2 Domestic Submersible Pump - 230V is a robust and reliable submersible pump, engineered with power and efficiency in mind.

• Max.

Industrial quality submersible pump, with stainless steel drive shaft, chrome plated body and 50mm (2") diameter outlet.

• Max. flow rate: 300 litres/min
• Maximum head (lift height): 10m
• Can pump small solids in suspension
• Robust cast iron base with filter
• Includes outlet connector and 10m of H07RNF cable
• 720 Watt, 230V
• 2" BSP outlet

Clarke BPT 600 Water Pressure Boosting Pump - 230v is a robust and reliable submersible pump, engineered with power and efficiency in mind.

• Max output 50lpm
• Max head 35m
• 230V motor (600wts)
• 19lt tank contains air inflated bladder to maintain constant water pressure
• Self priming pump
• Auto pressure on/off switch
• Includes inlet filter, non-return valve, pressure gauge, electric cable with fitted plug and water resistant on/off switch
• 1" BSP outlet

This robust stainless steel pump is built for home or general industrial use thanks to the self priming design and corrosion & rust resistant construction.

• Maximum output: 61l/min
• Maximum head: 46m
• 1200Watt, 230V motor
• Self priming
• Corrosion and rust proof construction
• Includes 1” output elbow, integral carry handle, electric cable with plug and water resistant on/off switch
• Dimensions (LxWxH): 348mm x 218mm x 243mm

Clarke DWP 200A Submersible Pump - 230v is a robust and reliable submersible pump, engineered with power and efficiency in mind.

• Float switch operation
• Corrosion resistant stainless steel casing and cast iron base for long reliable service
• Handle solids in suspension up to 7mm in diameter
• Hose Outlet 2"
• Max delivery 600l/m
• Max head 10m
• Input power 1500W
• 230V 50Hz supply.
• Cable length 10m
• Weight 21kg

Clarke PSP125B Puddle Pump - With Auto Sensor 230v is a robust and reliable submersible pump, engineered with power and efficiency in mind.

• 230v, 400W
• 1.5" BSP outlet
• 116l/min flow rate
• 7m max head
• Cable length 10m

Clarke 1 1/4 inch non-return flap. Used for pressure switch control. Manufacturer code: LDS-3600364

Clarke submersible pump with selectable manual or auto mode.

This is a highly portable hot and cold pressure washer with a hot jet of up to 80°C to quickly dissolve grime and grease.

This Clarke Harry Hot Wash is provided with a extra long 8m high pressure hose and fitted with a hose and lance holder combined with handy wheels for easier movement.

Designed to be lightweigth and compact - so can be easily transported and stored.

Features an extremeley economical diesel powered water heating system

Includes a 300ml detergent dispenser bottle.

• Maximum pump pressure: 2103psi (145bar)
• Water temp: 80°C
• High pressure hose: 8m
• Fuel tank capacity: 1L
• Fuel Consumption: 1.5L/hr
• Water flow rate: 450 L/hr
• Motor: 2.3kW 230V
• Dimensions (L x W x H): 520 x 410 x 767mm
• Wheels: 246mm diameter
• Weight: 26.9kg

Commercial strength powerfull diesel pressure washer from Clarke.

Highly efficient direct drive means there are no belts or pulleys to replace and the overall reduction in vibration means longer service life.

The Clarke CSE2 1¼" 750W 253Lpm 10m Head Submersible Water Pump (230V) - 7230560. This self-priming device can be used for continuous running and delivers top standard general duty for clean water pumping.

The Clarke PW50A 2" Petrol Powered Water Pump - 7140651. This mobile and lightweight petrol powered device from Clarke is perfect for draining pits, pools, trenches, foundations and irrigation.

The Clarke CEB103 1" 230V Centrifugal Brass Body Water Pump - 7230327. 1" 230V Centrifugal Brass body fluid device - A medium duty centrifugal water pump with a non-corrosive brass pump body and dependable 230V motor.

The Clarke PLS200AH 11HP Heavy Duty Petrol Pressure Washer - 200 bar (2900psi) - 7330300. Powered by a tough, dependable Honda petrol engine, this superb pressure washer is manufactured to serve the needs of professional users who require a powerful yet highly portable superior pressure washer.

A great mobile semi-professional high pressure hot washer is great for really effective cleaning of vehicles, caravans, bikes, patios, etc. Hot jet up to 90°C rapidly dissolves dirt or grime. Economical diesel powered water heating system is ideal for when time is of the essence. This great hot pressure washer benefits from a brass pump head and induction motor for long term reliability.