Dab

DAB first smart heating circulator pump, offers unique features thanks to the new DAB 4.0 in terms of assisting the installer and improving the performance of the domestic cooling or heating systems. This product is manufactured by Dab. Combining the strength of an mechanical circulator with the benefits of the electronic circulator.

IPX5 certified degree of protection prevents infiltration of water in the mechanics and electronics mean faults are reduced to a minimum.

Engineered with front electronics, the new user interface with illuminated display and sequential button with immediate feedback makes easier the setting and readability under all conditions. The EVOSTA 3 version has a display showing the instantaneous flow rate, the instantaneous head and the instantaneous power consumption in Watts. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.

Easy access to the airvent plug providing access to the shaft for unblocking in case of seizure and automatic degassing.

The range of EVOSTA 3 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The circulator can now be replaced easily: the new interchangeable power connector of the Evosta 3 range can be applied with connection plugs of other competitors without the need to rewire all the electrical connections. Even the most awkward replacement is now quick and easy.

Construction Features

Cast Iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on ceramic bushings lubricated by the pumped liquid. Stainless Steel rotor liner, stator liner and closing flange. Graphite thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection.

Appropriate for pumped liquids clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%)

The DAB Evosta3 80/180 Domestic Heating Circulator Pump - 240v - Single Phase - 70 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 70 Ltr/min. The maximum head for this pump is 6m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet electronic central heating circulator pump for water recirculation in heating and conditioning systems in residential building service. This product is manufactured by Dab. Efficient and reliable, equipped with a double-digit display with indication of the parameters. It is ideal for replacing old circulators due to its compact dimensions and the possible settings. The presence of a single key simplifies the configuration by the installer. The included calcium removal cartridge keeps the motor shaft in perfect condition, preventing the normal formation of limescale that it can be generated inside the circulator if some air bubbles are present during the first installation. 5 years warranty.

Construction Includes Of The Pump

Pump body in Cast Iron with cataphoretic treatment. Technopolymer impeller. Graphite thrust bearing. Brass air plug.

Construction Features Of The Motor

Permanent magnet synchronous motor, Stainless Steel motor casing. Motor shaft and ceramic bushings. Rotor jacket, stator jacket and Stainless Steel closing flange. Motor shaft can be unblocked manually.

Construction Features Of The Electronics

Water-resistant variable frequency drive with IPX5 protection. Possibility of configuration by a single key. It is possible to choose from the nine available operating settings: three with proportional pressure, three with constant pressure, three with constant curve. The numeric display can show the current absorption in Watts, the instantaneous flow rate, the head and the set curve. Equipped with automatic degassing function and protection against overload and dry running. Power connector adaptable to connectors of other brands without redoing the electrical connections.

The DAB Evosta3 60/180 Domestic Heating Circulator Pump - 240v - Single Phase - 60 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 60 Ltr/min. The maximum head for this pump is 6m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Evosta 2 San is a wet rotor electronic central heating circulator pump for the circulation of drinkable hot water in domestic and residential systems. This product is manufactured by Dab. Ideal for replacing old circulators, even of other brands. Simple configuration with a single key.The included calcium removal cartridge keeps the motor shaft in perfect condition, preventing the normal formation of limescale that it can be generated inside the circulator if some air bubbles are present during the first installation. 5 years warranty.

Construction Includes Of The Pump

Brass pump body, technopolymer impeller. Graphite thrust ring. Integrated brass air vent plug.

Construction Features Of The Motor

Permanent magnet synchronous motor, steel casing, ceramic motor shaft, Stainless Steel stator sleeve and closing flange. EPDM sealing ring.

Construction Features Of The Electronics

Water-resistant variable frequency drive with IPX5 protection. A single key can be applied to scroll through the nine options and set the operating parameters: three for proportional pressure, three for constant pressure, and three for constant speed curves. Overload protection.

The DAB Evosta2 SAN 80/150 Domestic Heating Circulator Pump - 240v - Single Phase - 70 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 70 Ltr/min. The maximum head for this pump is 8m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service.

Wet rotor electronic central heating circulator pump engineered for the circulation of water in residential building service with thermal solar collector heating systems. This product is manufactured by Dab. IPX5 protection.

The circulator is ideal for replacing old three-speed circulators thanks to its compact size and all-round performance. A single key simplifies configuration.

The included calcium removal cartridge keeps the motor shaft in perfect condition, preventing the normal formation of limescale that it can be generated inside the circulator if some air bubbles are present during the first installation. 5 years warranty.

Construction Includes OF The Pump

Cataphoretically-coated Cast Iron pump casing. Steel motor casing, technopolymer impeller. Stainless Steel rotor sleeve, stator sleeve and closing flange. Graphite thrust ring. EPDM sealing rings and brass air vent plug.

Construction Features Of The Motor

Permanent-magnet synchronous motor. Motor with internal overload protection. Energy efficiency index of EEI ¢°¤ 0.20. Direct access to the motor shaft for releasing it when necessary. 1,5 meters molex plug cable.

Contstruction Features Of The Electronics

Control panel on circulator cover. Mode key for selecting nine configuration options. The settings are indicated on the six-segment LED display. The variable frequency drive offers protection against water hammer action and helps to save energy.

The DAB Evosta2 SOL 20-75/130 Solar Domestic Heating Circulator Pump - 240v - Single Phase - 66 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 66 Ltr/min. The maximum head for this pump is 7.5m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB Evosta2 San 40-70/150 is a wet rotor electronic central heating pump for the circulation of drinkable hot water in domestic and residential systems. This product is manufactured by Dab. Ideal for replacing old circulators, even of other brands. Simple configuration with a single key.

The included calcium removal cartridge keeps the motor shaft in perfect condition, preventing the normal formation of limescale that it can be generated inside the circulator if some air bubbles are present during the first installation.

Construction Includes Of The Pump

Brass pump body, technopolymer impeller. Graphite thrust ring. Integrated brass air vent plug.

Construction Features Of The Motor

Permanent magnet synchronous motor, steel casing, ceramic motor shaft, Stainless Steel stator sleeve and closing flange. EPDM sealing ring.

Construction Features Of The Electronics

Water-resistant variable frequency drive with IPX5 protection. A single key can be applied to scroll through the nine options and set the operating parameters: three for proportional pressure, three for constant pressure, and three for constant speed curves. Overload protection.

The DAB Evosta2 SAN 40-70/150 Domestic Heating Circulator Pump - 240v - Single Phase - 60 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 60 Ltr/min. The maximum head for this pump is 7m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

DAB first smart heating circulator pump, offers unique features thanks to the new DAB 4.0 in terms of assisting the installer and improving the performance of the domestic cooling or heating systems. This product is manufactured by Dab. Combining the strength of an mechanical circulator with the benefits of the electronic circulator.

IPX5 certified degree of protection prevents infiltration of water in the mechanics and electronics mean faults are reduced to a minimum.

Engineered with front electronics, the new user interface with illuminated display and sequential button with immediate feedback makes easier the setting and readability under all conditions. The EVOSTA 3 version has a display showing the instantaneous flow rate, the instantaneous head and the instantaneous power consumption in Watts. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.

Easy access to the airvent plug providing access to the shaft for unblocking in case of seizure and automatic degassing.

The range of EVOSTA 3 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The circulator can now be replaced easily: the new interchangeable power connector of the Evosta 3 range can be applied with connection plugs of other competitors without the need to rewire all the electrical connections. Even the most awkward replacement is now quick and easy.

Construction Features Of The Pump

Cast Iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on ceramic bushings lubricated by the pumped liquid. Stainless Steel rotor liner, stator liner and closing flange. Graphite thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection.

Appropriate for pumped liquids clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%)

The DAB Evosta3 80/130 Domestic Heating Circulator Pump - 240v - Single Phase - 70 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 70 Ltr/min. The maximum head for this pump is 6m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.

Product Applications

Low energy consumption electronic central heating pump for domestic hot water circulation.

Advantages

The new range of EVOSTA 2 SAN circulators by DAB combines the strength of a mechanical circulator with the benefits of an electronic circulator.

Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI ¢°¤ 0.18, as well as the protection class IPX5 and the integrated bleeding plug. This product is manufactured by Dab. EVOSTA 2 SAN family ranks as one of the best products in the category in terms of performance and reliability.

The range of EVOSTA 2 SAN circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary.

Construction Includes

Bronze pump body and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on ceramic bushings lubricated by the pumped liquid.

Stainless Steel rotor liner and closing flange. Graphite thrust ring. EPDM seal ring and brass air bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection.

Control Panel

The settings of EVOSTA 2 SAN circulators can be modified in the control panel on the facia of the pump. The pump has nine settings that can be selected scrolling the MODE button.

Six illuminated segments on the display indicate the settings of the pump.

The DAB Evosta2 SAN V 11-139 Domestic Heating Circulator Pump - 240v - Single Phase is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. The maximum head for this pump is 1m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.