Dab

The ESYTANK delivers a modular portable water storage tank and pump system. This product is manufactured by Dab. Fully packaged solution with integrated ESYDOCK station. The ESYTANK modular design lets you also increase your water storage capacity by adding additional tanks to three of its sides. A twin pump duty assist or duty standby system can also be created. The DAB ESYBOX is NOT included and needs to be purchased separately.

DAB ESYTANK units are robust, compact break-tank style solutions intended for domestic and light commercial installations, helping stabilise demand peaks and maintain consistent performance from a connected booster pump system.

• Creates a buffer store to support steady boosted supply
• Helps protect booster operation where mains supply is variable
• Neat, above-ground tank format for plant rooms and utility spaces
• Suitable for clean / potable-water boosting setups (installation dependent)

Common uses include whole-house pressure boosting, small commercial outlets, multi-outlet properties, and sites where a buffer tank improves system stability and reduces reliance on gravity fed systems.

Product Applications

Automatic water lifting sets, particularly appropriate for domestic use, small installations for civil, industrial and agricultural use, washing systems and hobbies.

These are characterised by the use of JET self-priming electropumps which can operate even when there is air, gas and small quantities of sand in the water.

The set is composed of a diaphragm tank with capacity 20 litres, pressure switch for automatic operation, pressure gauge, JET electropump complete with power cable and plug, kit for coupling the pump and the tank, all assembled and ready for installation. This product is manufactured by Dab.

Construction Includes Of The Pump

Die-cast aluminium pump body and motor support. Technopolymer impeller, diffuser, Venturi tube and sand guard. Stainless Steel pressure discs. Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Induction motor, closed and cooled with external ventilation. Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life. Built-in thermal and current overload protection and a capacitor permanently in circuit. Manufactured according to CEI 2-3 and CEI 61-69 standards (EN 60335-2-41). Motor protection: IP44 Terminal box protection: IP55 Insulation class: F

Construction Features Of The Tank

Horizontal type, capacity 20 litres, with butyl diaphragm, complete with feet on the bottom and brackets for fixing the pump on top.

The DAB AQUAJET 82 M-G Booster Set - 240v - Single Phase - 90 Ltr/min. is a Booster Set item. Voltage for this item is 240V. It has an actual flow rate of 90 Ltr/min. The maximum head for this pump is 61m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The ESYTANK & ESYBOX combined create a complete pressure boosting system with high-efficiency allowing for:

Construction Charecteristics:

The DAB ESYTANK has a maximum water capacity of 480 litres, Appropriate for use with drinking water. This product is manufactured by Dab.

Mains water in-let valve for filling from the water mains with integrated float and free discharge in compliance with UNI EN 1717. Overflow connection system type AG as per the same standard (UNI EN 1717 “Protection against pollution of potable water″).
The tank is supplied complete with ESYDOCK, a suction pipe with foot valve, and a delivery pipe.
The tank is
On the front wall there is the possibility of connecting a plug or a discharge pipe with a pipe that can be welded or glued on.
On the rear, at the bottom, there is access to a possible direct drain under the tank.
Both auxiliary discharge points can be drilled as required.
System maintenance is also simple thanks to the handy inspection lid. ESYTANK has a modular design giving the possibility of installing additional tanks on
three different sides (at the side and rear).
Nothing else is needed, ESYTANK in combination ESYBOX to guarantee the correct connection, installation and operation in residential and light commercial
applications.

The DAB ESYBOX And ESYTANK Mains Booster Set - 500 Litre Tank Capacity - 120 Ltr/min - Single Phase is a Booster Set item. Voltage for this item is 230V. It has an actual flow rate of 120 Ltr/min. This being

Basement or cellar sump pit drainage; Industrial and civil liquid transfer applications; Water pressure boosting for household, commercial or irrigation systems; Transferring water between tanks, cisterns, or IBC containers and more, please get in touch for product support.

• Catering for the water requirement, if the public distribution main is insufficient
• Compliance with civil water regulations where pumping systems cannot draw directly from the distribution mains. Avoiding the reflux and possible contamination of water back into the distribution mains
• Use as an intermediate tank in tall buildings dividing pressure boosting into several areas

• Notable reduction of space required
• Dimensions appropriate for passing through cellar door ways
• Tank supplied complete with all accessories for rapid installation
• Full integrated and simple installation of ESYBOX
• Recyclable Materials
• Tank suitable for potable water

The ESYTANK delivers a modular portable water storage tank and pump system. This product is manufactured by Dab. Fully packaged solution with integrated ESYDOCK station. The ESYTANK modular design lets you also increase your water storage capacity by adding additional tanks to three of its sides. A twin pump duty assist or duty standby system can also be created. The DAB ESYBOX is NOT included and needs to be purchased separately.

DAB ESYTANK units are robust, compact break-tank style solutions intended for domestic and light commercial installations, helping stabilise demand peaks and maintain consistent performance from a connected booster pump system.

• Creates a buffer store to support steady boosted supply
• Helps protect booster operation where mains supply is variable
• Neat, above-ground tank format for plant rooms and utility spaces
• Suitable for clean / potable-water boosting setups (installation dependent)

Common uses include whole-house pressure boosting, small commercial outlets, multi-outlet properties, and sites where a buffer tank improves system stability and reduces reliance on gravity fed systems.

The ESYTANK & ESYBOX combined create a complete pressure boosting system with high-efficiency allowing for:

Construction Charecteristics:

The DAB ESYTANK has a maximum water capacity of 480 litres, Appropriate for use with drinking water. This product is manufactured by Dab.

Mains water in-let valve for filling from the water mains with integrated float and free discharge in compliance with UNI EN 1717. Overflow connection system type AG as per the same standard (UNI EN 1717 "Protection against pollution of potable water³).
The tank is supplied complete with ESYDOCK, a suction pipe with foot valve, and a delivery pipe.
The tank is
On the front wall there is the possibility of connecting a plug or a discharge pipe with a pipe that can be welded or glued on.
On the rear, at the bottom, there is access to a possible direct drain under the tank.
Both auxiliary discharge points can be drilled as required.
System maintenance is also simple thanks to the handy inspection lid. ESYTANK has a modular design giving the possibility of installing additional tanks on
three different sides (at the side and rear).
Nothing else is needed, ESYTANK in combination ESYBOX to guarantee the correct connection, installation and operation in residential and light commercial
applications.

The DAB ESYBOX And ESYTANK Mains Booster Set - Cat 5 - 500 Litre Tank Capacity - 120 Ltr/min. - Single Phase is a Booster Set item. Voltage for this item is 230V. It has an actual flow rate of 120 Ltr/min.