Dab

Single impeller centrifugal pupm appropriate for domestic, civil, industrial and agricultural installations and for decanting, mixing and irrigating uses. This product is manufactured by Dab. Cast Iron pump body and motor support. Technopolymer or Cast Iron impeller (depending on the models). Stainless Steel driving shaft.

Carbon/ceramic mechanical seal. Asynchronous, closed motor, cooled by external ventilation. Built-in thermal and current overload protection and a capacitor permanently on in the singlephase version.

For the protection of the three-phase motor it is advisable to use a suitable overload protection complying with the regulations in force.

Product Applications

Single impeller centrifugal pump

Construction Includes Of The Pump

Cast Iron pump body and motor support. Technopolymer impeller for K 20/41, K 30/70, K 30/100, K 36/100, K 12/200, K 36/200, K 40/200, K 55/200. Cast Iron impeller for K 14/400, K 11/500, K 18/500, K 28/500, K 40/400, K 50/400, K 30/800, K 40/800, K 50/800, K 20/1200, K 25/1200, K 35/1200. Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Induction motor, closed and cooled with external ventilation.Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life.Built-in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.Three-phase motors should be protected with a suitable overload protection complying with the regulations in force.Manufactured according to CEI 2-3 standards.Motor protection: IP44 (IP 55 for motor to 2,2 - 3 - 4 - 5,5 - 7,5 - 9,2 - 11 kW)Terminal box protection: IP55Insulation class: F

The DAB K 40/400 T-IE3 Single-Impeller Centrifugal Pump - 415v - Three Phase is a Centrifugal Pump item. Voltage for this item is 400V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The integrated variable frequency drive ensures greater comfort and protection against water hammer action, and also saves energy by adapting the motor speed to actual requirements.

The DAB VORTEX BWO 155V Timer Hot Water Circulator - 11/4" - 240v - Single Phase - NO DESCRIPTIVE DATA is a Circulator Pump item. This product is manufactured by Dab. Voltage for this item is 240V. It has an actual flow rate of 15 Ltr/min. The maximum head for this pump is 1.3m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic central heating circulator pump engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.

Product Applications

Hot or cold water circulation pump with in-line ports, appropriate for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron. This product is manufactured by Dab. PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges. Technopolymer impeller. Carbon/ceramic mechanical seal.

The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions. For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle.

A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors. The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

Pump body and motor support in Cast Iron. PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges. Technopolymer impeller. Carbon/ceramic mechanical seal. The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions. For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be used during maintenance of one of the two motors. The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

The DAB DKLM 80-600 T IE3 Twin Head In-Line Circulator Pump - 415v - Three Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Single-impeller centrifugal pump appropriate for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.

Construction Includes Of The Pump

Pump body and motor support in Cast Iron. This product is manufactured by Dab. Technopolymer or Cast Iron impeller, as per the TECHNICAL DATA table. Carbon/ceramic mechanical seal.

Construction Of The Motor

Closed asynchronous type, external ventilation cooling. Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions. For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
IE2 motors as standard, from 0,75 KW to 5,5 KW - IE3 ¢°¥ 7,5 kW

The DAB K 14/400 M Single-Impeller Centrifugal Pump - 240v - Single Phase is a Centrifugal Pump item. Voltage for this item is 240V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic circulator engineered for the circulation of drinkable hot water in residential building service and commercial building service. This product is manufactured by Dab. Possibility of remote control with the DConnect service, the DConnect Box is supplied separately.

Multi-impeller vertical centrifugal pumps in AISI 304 Stainless Steel with coupling with MCE-P variable frequency drive installed, engineered for pressurization activities in civil and commercial building service, in agriculture and in irrigation systems, in washing systems.

The pumps are particularly versatile, thanks to the use of the MCE-P variable frequency drive, which ensures performance levels capable of automatically adapting to the different needs of the system, keeping a constant pressure. This product is manufactured by Dab. All parts in contact with the liquid are in AISI 304 Stainless Steel (on request in AISI 316 Stainless Steel, for X versions).

Standardized flanges and standard-sized center distances to facilitate pump replacement. Removable cartridge mechanical seal, it is removable without removing the motor.

Construction Includes Of The Pump

The use of advanced Stainless Steel processing technologies for the main hydraulic components helps to achieve very high performance levels. The pumps are extremely versatile, thanks to the center distance of the in-line ports, designed to maximize interchangeability. The parts in contact with the liquid are made of AISI 304 Stainless Steel for NKV S models, or AISI 316 Stainless Steel for NKV X models (only available in special order). Round flanges as standard (oval, loose, virtual, clamp available on request). The mechanical seal is made of standard E1 = Graphite/Silicon Carbide/AISI 316/EPDM = BQGE. FKM/Viton available on request. Starting from 5,5 KW models, the seal can be removed without removing the motor. Rigid coupling.

Construction Features Of The Motor

Air-cooled asynchronous motor. Standard two-pole motor, IE3 50 Hz 0,75 KW or IE2, IE3 60 Hz 0,75 KW. Motor frame B14 up to 4 KW motor size, motor frame B5 from 5,5 KW motor size.

Construction Features Of The Electronics

The use of the MCE-P variable frequency drive has many advantages: better comfort thanks to the constant pressure at the variation of demand (pressure sensor installed as standard), increased efficiency, energy savings, protection from hammering effects, simpler configuration thanks to the display.It makes it possible to set a setpoint in case of units with several pumps (each with MCE-P variable frequency drive), or to start a different pump at each restart or at set intervals.It must be installed on the motor fan cover, also to take advantage of its cooling capabilities.

The DAB NKVE 20/03 S 030 T MCE30/P-IE3 Multi-Stage Centrifugal Pump - 415v - Three Phase - 483 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 400V. It has an actual flow rate of 483 Ltr/min. The maximum head for this pump is 43m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic central heating circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.

Compact wet rotor electronic circulator with bronze pump body engineered for the circulation of domestic hot water in commercial building service. This product is manufactured by Dab. It is equipped with an integrated variable frequency drive to ensure better all-round performance and energy efficiency, it also protects the system against water hammer action.

Product Applications

Hot or cold water circulation pump with in-line ports, appropriate for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron. This product is manufactured by Dab. PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges. Technopolymer impeller. Carbon/ceramic mechanical seal. The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.

For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors. The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions. Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.

Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions. For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations. Construction according to CEI 2-3. Protection class: IP 55 Insulation class: F Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 65-2000 T In-Line Circulator Pump - 415v - Three Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Self-priming centrifugal pumps, engineered for pressurization, gardening and irrigation activities and underground extraction (also from wells) and rainwater reuse in residential building service.

Product Applications

The vertical delivery draining submersible pump is appropriate for domestic automatically operated fixed applications, for draining basements and garages that are subject to flooding. This product is manufactured by Dab. This version is particularly suited for narrow well installation requiring automatic suction up to 2/3 mm. Thanks to its compact, easy to handle shape, it may also be applied as a portable pump for emergencies such as lifting water from tanks or rivers, emptying swimming pools, fountains, excavations, and pedestrian subways. It is also ideal for gardening, and hobby applications in general. This pump can be utilised with liquids containing solid particles of up to 10 mm in size. The electronic level selector allows fixed installation, ensuring automatic operation, and enabling the selection of the level of the liquid for automatic start. With removable filter, it is capable of suction of up to a minimum of 2/3 mm (filter removed)

Construction Includes Of The Pump

Hydro resistant technopolymer pump body, cover, and suction grid. Stainless Steel motor, roto shaft, and bolts and screws. Threefold seal with interposed rings with oil pre-chamber.

Construction Features Of The Motor

Submersible type continuous duty asynchronous motor.Stator enclosed in airtight Stainless Steel casing, with an outer cover that protects the wiring and the capacitor. Rotor running on permanently lubricatedball bearings, oversized to ensure low noise and durability. Built-in thermal-amperometric protection and permanently connected capacitor.

The DAB NOVA UP 300M-AE Submersible Pump - 240v - Single Phase - 166 Ltr/min. is a Submersible product. Voltage for this item is 240V. It has an actual flow rate of 166 Ltr/min. The maximum head for this pump is 8m.

Product Applications

Vertical multistage centrifugal pump appropriate for small to medium user water systems. This product is manufactured by Dab. Suitable for pressurization units, filling of pressure vessels, sprinkler and watering systems, fire-fighting and washing systems, channelling of condensate and cooling water. InNOVAtive and robust design.

Construction Includes Of The Pump

KVC: Technopolymer delivery and suction bodies, and in-line suction and delivery ports with threaded metal insert.
KVCX: technopolymer suction body with threaded metal insert; Stainless Steel threaded delivery port on pump liner.
Impellers, diffuser bodies and diffusers in technopolymer, fully rust-proof. AISI 304 Stainless Steel pump liner, adjustment rings and seal disc. Carbon/ceramic mechanical seal, fitted on the AISI 303 stainless-steel drive shaft extension.

Construction Features Of The Motor

Closed asynchronous type, external ventilation cooling. Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability. Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions. Overload protection to be provided by the user for the three-phase version. Construction according to CEI 2-3 / CEI 61-69 (EN 60335-2-41).

The DAB KVC 35-120 T-IE3 Centrifugal Multi-Stage Pump - 415v - Three Phase is a Centrifugal Pump item. Voltage for this item is 400V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.