Dab

Drain: 40 mm

The supplied manual shows how easily this macerator/toilet-waste grinder can be connected. This product is manufactured by Dab. The unit can be placed directly behind the toilet, and therefore can be set up independent of any existing pipes and drain connection. Opt for one of the following macerators if this model has too many/not enough connections:

Contents of the kit

The DAB Genix 130 V230/50 Macerator Sewage Grinder With Collecting Tank - 230v - Single Phase is a Sewage Pump item. Voltage for this item is 230V. It has an actual flow rate of 93 Ltr/min. The maximum head for this pump is 6.5m.

The DAB Evoplus 40/180 M Electronic Circulator - 230v - Single Phase - Threaded Connection is a Circulator Pump item. This product is manufactured by Dab. Voltage for this item is 230V. It has an actual flow rate of 100 Ltr/min. The maximum head for this pump is 4m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

TECHNICAL DATA

Operating range: capacity up to 80 l/min; head up to 50 m

Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.

Liquid temperature range: from 0°C to +35°C for domestic use for other use: from 0°C to +40°C

Maximum suction depth: 8 meters

Maximum ambient temperature: +50°C

Maximum operating pressure: 7,5 Bar. (750 kPa)

Motor protection rating: IPX4

Insulation class: F

Installation: Horizontal or vertical fixed position

APPLICATIONS

ESYBOX mini is the DAB compact automatic pressurisation system for the water supply of a single dwelling. This product is manufactured by Dab. ESYBOX mini guarantees the comfort of constant pressure (Pressure Set Point adjustable from 1 up to 5 Bar.) inside the system, and energy savings thanks to the inverter technology. Appropriate for use with drinking water, in domestic systems, and in gardening applications. ESYBOX mini does not require any additional components for its installation.

The DAB ESYBOX Electronic Water Pressure System - Mini Version is a Pressure System item. It has an actual flow rate of 80 Ltr/min. The maximum head for this pump is 50m.

The operating pressure of this is 5 Bar.

DAB first smart heating circulator pump, offers unique features thanks to the new DAB 4.0 in terms of assisting the installer and improving the performance of the domestic cooling or heating systems. This product is manufactured by Dab. Combining the strength of an mechanical circulator with the benefits of the electronic circulator.

IPX5 certified degree of protection prevents infiltration of water in the mechanics and electronics mean faults are reduced to a minimum.

Engineered with front electronics, the new user interface with illuminated display and sequential button with immediate feedback makes easier the setting and readability under all conditions. The EVOSTA 3 version has a display showing the instantaneous flow rate, the instantaneous head and the instantaneous power consumption in Watts. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.

Easy access to the airvent plug providing access to the shaft for unblocking in case of seizure and automatic degassing.

The range of EVOSTA 3 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The circulator can now be replaced easily: the new interchangeable power connector of the Evosta 3 range can be applied with connection plugs of other competitors without the need to rewire all the electrical connections. Even the most awkward replacement is now quick and easy.

Construction Features

Cast Iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on ceramic bushings lubricated by the pumped liquid. Stainless Steel rotor liner, stator liner and closing flange. Graphite thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection.

Appropriate for pumped liquids clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%)

The DAB Evosta3 80/180 Domestic Heating Circulator Pump - 240v - Single Phase - 70 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 70 Ltr/min. The maximum head for this pump is 6m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Applications

Product Applications

The DAB Multi 4 SW M is a multi-stage self-priming pump appropriate for managing swimming pool with chlorine water or sea water or for gardening and irrigation in residential building service. This product is manufactured by Dab. Multi 4 SW is engineered to work with hydraulic pool cleaners and also to increase the pressure of salt water.

Construction Includes Of The Pump

Technopolymer pump body and impeller, AISI 316 Stainless Steel support and seal holder.

Construction Features Of The Motor

Motor shaft in AISI 316 Stainless Steel, air-cooled asynchronous motor, thermo-amperometric protection and permanent capacitor, (as standard in the single-phase version), protection by the user in the three-phase version. Carbon-ceramic mechanical seal.

The DAB Multi 4 SW M Multi-Stage Salt Water Pump - 240v - Single Phase - 90 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 240V. It has an actual flow rate of 90 Ltr/min. The maximum head for this pump is 46m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB EuroInox 40/30 M Is a Self-priming multistage horizontal centrifugal pump, featuring extremely silent running appropriate for domestic use for water supply and pressurisation, irrigation of gardens and vegetable gardens, and moving water in general.

Construction Includes Of The Pump

Pump body in Stainless Steel AISI 304.
Motor support in die-cast aluminium, seal holder in AISI 304 steel.
Mechanical seal in carbon/ceramic. This product is manufactured by Dab. Rotor shaft in AISI 304 steel.
Rotors, diffuser bodies and diffusers in technopolymer.
Adjustment rings in Stainless Steel.

Construction Features Of The Motor

Continuous service asynchronous motor.
Incorporated thermal current protection and permanently connected capacitor in the single-phase version.
The user must provide overload protection for the three-phase version.
Protection level of motor: IP 44
Protection level of terminal board: IP 55
Insulation class: F

- Operating range: from 10 to 120 l/min. with a head of up to 56 m.

- Pumped liquid characteristics: clean, free from solid or abrasive substances, not viscous,
not aggressive, not crystallised, chemically neutral and close to the characteristics of water.

- Liquid temperature range:
from 0°C to +35°C C for domestic use (EN 60335-2-41)
from 0°C to +40°C for other uses.

- Maximum ambient temperature: +40°C

- Maximum operating pressure: 8 Bar. (800 kPa)

- Installation: fixed or portable in a horizontal position

The DAB EUROINOX 40/30 M Centrifugal Multi-Stage Pump - 240v - Single Phase - 57 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 240V. It has an actual flow rate of 57 Ltr/min. The maximum head for this pump is 56m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet electronic central heating circulator pump for water recirculation in heating and conditioning systems in residential building service. This product is manufactured by Dab. Efficient and reliable, equipped with a double-digit display with indication of the parameters. It is ideal for replacing old circulators due to its compact dimensions and the possible settings. The presence of a single key simplifies the configuration by the installer. The included calcium removal cartridge keeps the motor shaft in perfect condition, preventing the normal formation of limescale that it can be generated inside the circulator if some air bubbles are present during the first installation. 5 years warranty.

Construction Includes Of The Pump

Pump body in Cast Iron with cataphoretic treatment. Technopolymer impeller. Graphite thrust bearing. Brass air plug.

Construction Features Of The Motor

Permanent magnet synchronous motor, Stainless Steel motor casing. Motor shaft and ceramic bushings. Rotor jacket, stator jacket and Stainless Steel closing flange. Motor shaft can be unblocked manually.

Construction Features Of The Electronics

Water-resistant variable frequency drive with IPX5 protection. Possibility of configuration by a single key. It is possible to choose from the nine available operating settings: three with proportional pressure, three with constant pressure, three with constant curve. The numeric display can show the current absorption in Watts, the instantaneous flow rate, the head and the set curve. Equipped with automatic degassing function and protection against overload and dry running. Power connector adaptable to connectors of other brands without redoing the electrical connections.

The DAB Evosta3 60/180 Domestic Heating Circulator Pump - 240v - Single Phase - 60 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 60 Ltr/min. The maximum head for this pump is 6m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Evosta 2 San is a wet rotor electronic central heating circulator pump for the circulation of drinkable hot water in domestic and residential systems. This product is manufactured by Dab. Ideal for replacing old circulators, even of other brands. Simple configuration with a single key.The included calcium removal cartridge keeps the motor shaft in perfect condition, preventing the normal formation of limescale that it can be generated inside the circulator if some air bubbles are present during the first installation. 5 years warranty.

Construction Includes Of The Pump

Brass pump body, technopolymer impeller. Graphite thrust ring. Integrated brass air vent plug.

Construction Features Of The Motor

Permanent magnet synchronous motor, steel casing, ceramic motor shaft, Stainless Steel stator sleeve and closing flange. EPDM sealing ring.

Construction Features Of The Electronics

Water-resistant variable frequency drive with IPX5 protection. A single key can be applied to scroll through the nine options and set the operating parameters: three for proportional pressure, three for constant pressure, and three for constant speed curves. Overload protection.

The DAB Evosta2 SAN 80/150 Domestic Heating Circulator Pump - 240v - Single Phase - 70 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 70 Ltr/min. The maximum head for this pump is 8m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service.

Wet rotor electronic central heating circulator pump engineered for the circulation of water in residential building service with thermal solar collector heating systems. This product is manufactured by Dab. IPX5 protection.

The circulator is ideal for replacing old three-speed circulators thanks to its compact size and all-round performance. A single key simplifies configuration.

The included calcium removal cartridge keeps the motor shaft in perfect condition, preventing the normal formation of limescale that it can be generated inside the circulator if some air bubbles are present during the first installation. 5 years warranty.

Construction Includes OF The Pump

Cataphoretically-coated Cast Iron pump casing. Steel motor casing, technopolymer impeller. Stainless Steel rotor sleeve, stator sleeve and closing flange. Graphite thrust ring. EPDM sealing rings and brass air vent plug.

Construction Features Of The Motor

Permanent-magnet synchronous motor. Motor with internal overload protection. Energy efficiency index of EEI ¢°¤ 0.20. Direct access to the motor shaft for releasing it when necessary. 1,5 meters molex plug cable.

Contstruction Features Of The Electronics

Control panel on circulator cover. Mode key for selecting nine configuration options. The settings are indicated on the six-segment LED display. The variable frequency drive offers protection against water hammer action and helps to save energy.

The DAB Evosta2 SOL 20-75/130 Solar Domestic Heating Circulator Pump - 240v - Single Phase - 66 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 66 Ltr/min. The maximum head for this pump is 7.5m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB Evosta2 40-70/130 is a domestic hot water circulator pump with low energy consumption electronic central heating pump for water circulation in all types of domestic heating and cooling systems.

Advantages Of The Evosta2

The new range of EVOSTA 2 circulators by DAB combines the strength of an mechanical circulator with the benefits of the electronic circulator. This product is manufactured by Dab. Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI ¢°¤ 0.18, as well as the protection class IPX5 and the integrated bleeding plug, the EVOSTA 2 family ranks as one of the best products in the category in terms of performance and reliability. The range of EVOSTA 2 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary.

Construction Includes Of The Pump

Cast Iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, techno polymer impeller. Ceramic motor shaft on ceramic bushings lubricated by the pumped liquid. Stainless Steel rotor liner, stator liner and closing flange. Graphite thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection.

Construction Features Of The Electronics

The settings of the EVOSTA 2, EVOSTA 3 circulators can be modified in the control panel on the facia of the pump device. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.

The DAB Evosta2 40-70/130 Domestic Heating Circulator Pump - 240v - Single Phase - 60 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It has an actual flow rate of 60 Ltr/min. The maximum head for this pump is 7m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB Evosta2 San 40-70/150 is a wet rotor electronic central heating pump for the circulation of drinkable hot water in domestic and residential systems. This product is manufactured by Dab. Ideal for replacing old circulators, even of other brands. Simple configuration with a single key.

The included calcium removal cartridge keeps the motor shaft in perfect condition, preventing the normal formation of limescale that it can be generated inside the circulator if some air bubbles are present during the first installation.

Construction Includes Of The Pump

Brass pump body, technopolymer impeller. Graphite thrust ring. Integrated brass air vent plug.

Construction Features Of The Motor

Permanent magnet synchronous motor, steel casing, ceramic motor shaft, Stainless Steel stator sleeve and closing flange. EPDM sealing ring.

Construction Features Of The Electronics

Water-resistant variable frequency drive with IPX5 protection. A single key can be applied to scroll through the nine options and set the operating parameters: three for proportional pressure, three for constant pressure, and three for constant speed curves. Overload protection.

The DAB Evosta2 SAN 40-70/150 Domestic Heating Circulator Pump - 240v - Single Phase - 60 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 60 Ltr/min. The maximum head for this pump is 7m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

DAB first smart heating circulator pump, offers unique features thanks to the new DAB 4.0 in terms of assisting the installer and improving the performance of the domestic cooling or heating systems. This product is manufactured by Dab. Combining the strength of an mechanical circulator with the benefits of the electronic circulator.

IPX5 certified degree of protection prevents infiltration of water in the mechanics and electronics mean faults are reduced to a minimum.

Engineered with front electronics, the new user interface with illuminated display and sequential button with immediate feedback makes easier the setting and readability under all conditions. The EVOSTA 3 version has a display showing the instantaneous flow rate, the instantaneous head and the instantaneous power consumption in Watts. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.

Easy access to the airvent plug providing access to the shaft for unblocking in case of seizure and automatic degassing.

The range of EVOSTA 3 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The circulator can now be replaced easily: the new interchangeable power connector of the Evosta 3 range can be applied with connection plugs of other competitors without the need to rewire all the electrical connections. Even the most awkward replacement is now quick and easy.

Construction Features Of The Pump

Cast Iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on ceramic bushings lubricated by the pumped liquid. Stainless Steel rotor liner, stator liner and closing flange. Graphite thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection.

Appropriate for pumped liquids clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%)

The DAB Evosta3 80/130 Domestic Heating Circulator Pump - 240v - Single Phase - 70 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 70 Ltr/min. The maximum head for this pump is 6m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.