Dab

DAB first smart heating circulator pump, offers unique features thanks to the new DAB 4.0 in terms of assisting the installer and improving the performance of the domestic cooling or heating systems. This product is manufactured by Dab. Combining the strength of an mechanical circulator with the benefits of the electronic circulator.

IPX5 certified degree of protection prevents infiltration of water in the mechanics and electronics mean faults are reduced to a minimum.

Engineered with front electronics, the new user interface with illuminated display and sequential button with immediate feedback makes easier the setting and readability under all conditions. The EVOSTA 3 version has a display showing the instantaneous flow rate, the instantaneous head and the instantaneous power consumption in Watts. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.

Easy access to the airvent plug providing access to the shaft for unblocking in case of seizure and automatic degassing.

The range of EVOSTA 3 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The circulator can now be replaced easily: the new interchangeable power connector of the Evosta 3 range can be applied with connection plugs of other competitors without the need to rewire all the electrical connections. Even the most awkward replacement is now quick and easy.

Construction Features

Cast Iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on ceramic bushings lubricated by the pumped liquid. Stainless Steel rotor liner, stator liner and closing flange. Graphite thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection.

Appropriate for pumped liquids clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%)

The DAB Evosta3 80/180 Domestic Heating Circulator Pump - 240v - Single Phase - 70 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 70 Ltr/min. The maximum head for this pump is 6m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 40-1200/BQQE In-Line Circulator Pump - 240v - Single Phase - IE2 (1x220/240v), 0.55KW is a Circulator Pump item. Voltage for this item is 240V. It has an actual flow rate of 240 Ltr/min. The maximum head for this pump is 13.7m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB NOVA Submersible Salt Water Pump has been specifically built for draining salt water applications. This product is manufactured by Dab. It may be applied as a portable pump in emergency situations.

Construction Includes Of The Pump

Hydro resistant technopolymer pump body, cover, and suction grid.
AISI 316 Stainless Steel motor, rotor shaft, and bolts and screws.
Cable with tin plated conductors.

Construction Features Of The Motor

Submersible type continuous duty asynchronous motor.
Thermal overheating protection.

The DAB NOVA Submersible Salt Water Pump - 240v - Single Phase - 125 Ltr/min. is a Submersible product. Voltage for this item is 240V. It has an actual flow rate of 125 Ltr/min. The maximum head for this pump is 6m.

The DAB FEKA BVP 720 M-A is a Submersible pump for draining and lifting effluent water and rainwater in residential building service. This product is manufactured by Dab. The pump is appropriate for fixed or mobile installations.

Construction Includes Of The Pump

Technopolymer pump body to avoid corrosion or oxidation, ceramic bushing and triple sealing with rings in oil bath.

Construction Features Of The Motor

Continuous duty asynchronous submersible motor with stator inserted in a hermetic Stainless Steel casing and rotor mounted on oversized ball bearings. Thermal protection incorporated in all single-phase versions.
Motor shaft in AISI 416 Stainless Steel.

The DAB FEKA BVP 750 M-A Submersible Wastewater Pump - 240v - Single Phase - 400 Ltr/min. is a Submersible product. Voltage for this item is 240V. It is supplied with a 10m cable. It has an actual flow rate of 400 Ltr/min. The maximum head for this pump is 10m. It also features a Float Switch.