Dab

Product Applications

The DAB CP 50/2600 in-line circulator pump is appropriate for civil and industrial installations for heating, air conditioning, refrigeration and hot water for plumbing. This product is manufactured by Dab.

Construction Includes Of The Pump

Flanged suction and delivery connections in PN 16 with threaded holes for control pressure gauges. Cast Iron pump casing and motor support, Cast Iron and technopolymer impeller. Stainless Steel motor shaft, and Carbon/Graphite mechanical seal. Asynchronous threephase motor, 2 poles, closed and cooled with external ventilation.

The DAB CP 50/2600 T-IE3 In-Line Circulator Pump - 400v - Three Phase - 7005 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 7005 Ltr/min. The maximum head for this pump is 102m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Circulating pumps with IN-LINE connections, appropriate for civil and industrial installations for heating, conditioning, refrigeration and hot water for plumbing. This product is manufactured by Dab. Available in single and twin version.

Construction Includes

Flanged suction and delivery connections in PN 16 with threaded holes for control pressure gauges.Cast Iron pump casing and motor support, Cast Iron and technopolymer impeller.Stainless Steel motor shaft, and Carbon/Graphite mechanical seal.Asynchronous threephase motor, 2 poles, closed and cooled with external ventilation.

The DAB DCP 50/1900 T-IE3 Twin Head In-Line Circulator Pump - 400v - Three Phase - 7005 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 7005 Ltr/min. The maximum head for this pump is 102m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB DCP 50/2450 in-line circulator pump is appropriate for civil and industrial installations for heating, air conditioning, refrigeration and hot water for plumbing. This product is manufactured by Dab.

Construction Includes Of The Pump

Flanged suction and delivery connections in PN 16 with threaded holes for control pressure gauges. Cast Iron pump casing and motor support, Cast Iron and technopolymer impeller. Stainless Steel motor shaft, and Carbon/Graphite mechanical seal. Asynchronous threephase motor, 2 poles, closed and cooled with external ventilation.

Protection: IP 55
Insulation class: F

The DAB DCP 50/2450 T-IE3 Twin Head In-Line Circulatpr Pump - 400v - Three Phase - 7005 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 7005 Ltr/min. The maximum head for this pump is 102m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Circulating pumps with IN-LINE connections, appropriate for civil and industrial installations for heating, conditioning, refrigeration and hot water for plumbing. This product is manufactured by Dab. Available in single and twin version.

Circulating pumps with in-line connections,
Pump body and motor support in Cast Iron.
PN 16 flanged suction and delivery connections with threaded holes for control pressure gauges.
Technopolymer impeller and Carbon/Graphite mechanical seal. Three-phase, four-pole, asynchronous motor with external ventilation. To protect the motor it is advisable to use a thermal overload protection complying with the regulations in force.

The DAB DCP 50/3000 T-IE3 Twin Head In-Line Circulator Pump - 400v - Three Phase - 7005 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 7005 Ltr/min. The maximum head for this pump is 102m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Single impeller centrifugal pump appropriate for domestic, civil, industrial and agricultural installations and for decanting, mixing and irrigating uses.

Constructional Includes Of The Pump

Cast Iron pump body and motor support.
Technopolymer impeller for K 20/41, K 30/70, K 30/100, K 36/100, K 12/200, K 36/200, K 40/200, K 55/200.
Cast Iron impeller for K 14/400, K 11/500, K 18/500, K 28/500, K 40/400, K 50/400, K 30/800, K 40/800, K 50/800, K 20/1200, K 25/1200, K 35/1200.
Carbon/ceramic mechanical seal.

Constructional Features Of The Motor

Induction motor, closed and cooled with external ventilation.
Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life.
Built-in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.
Three-phase motors should be protected with a suitable overload protection complying with the regulations in force.
Manufactured according to CEI 2-3 standards.
Motor protection: IP44 (IP 55 for motor to 2,2 - 3 - 4 - 5,5 - 7,5 - 9,2 - 11 kW)
Terminal box protection: IP55
Insulation class: F

- Operating range: from 1.8 to 96 m3/h with head up to 62 metres

- Liquid quality requirements: clean, free from solids or abrasive substances, non viscous, non aggressive, non crystallized, chemically neutral, close to the characteristics of water.

- Liquid temperature range:
K 20/41, K 30/70, K 30/100, K 36/100
K 12/200, K 36/200, K 40/200 : from -10°C to +50°C
The rest of the range : from -15°C to +110°C

- Maximum ambient temperature: +40°C

The DAB K 30/70 M Single Impeller Centrifugal Pump - 240v - Single Phase is a Centrifugal Pump item. This product is manufactured by Dab. Voltage for this item is 400V. The maximum head for this pump is 102m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Circulating pumps with IN-LINE connections, appropriate for civil and industrial installations for heating, conditioning, refrigeration and hot water for plumbing. This product is manufactured by Dab. Available in single and twin version.

Construction Includes

Flanged suction and delivery connections in PN 16 with threaded holes for control pressure gauges. Cast Iron pump casing and motor support, Cast Iron and technopolymer impeller. Stainless Steel motor shaft, and SEE "SHAFT SEAL" SECTION mechanical seal. Asynchronous threephase motor, 2 poles, closed and cooled with external ventilation.

Protection: IP 55
Insulation class: F

- Operating range: from 3,6 to 420 m3/h with head up to 102 metres

- Liquid quality requirements: clean, free from solids or abrasive substances, non viscous,
non aggressive, non crystallized, chemically neutral, close to the characteristics of water.

The DAB DCP-G 100-3050/A/BAQE/15-IE3 Twin Head In-Line Circulator Pump - 400v - Three Phase - 7005 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 7005 Ltr/min. The maximum head for this pump is 102m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic circulator with bronze pump body engineered for the circulation of domestic hot water in small collective domestic, residential, civil and commercial systems.

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.

Circulator for domestic hot water systems of the closed circuit pressurized type or open circuit type. This product is manufactured by Dab. Bronze pump body. Motor casing in die-cast aluminium. Technopolymer impeller. Ceramic motor shaft mounted on graphite bushings lubricated by the pumped liquid. Stainless Steel rotor sleeve, stator sleeve and closing flange. Ceramic thrust ring, ethylene propylene sealing rings. Synchronous motor with permanent magnet rotor.

Wet rotor electronic central heating circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.

Compact wet rotor electronic circulator with bronze pump body engineered for the circulation of domestic hot water in commercial building service. This product is manufactured by Dab. It is equipped with an integrated variable frequency drive to ensure better all-round performance and energy efficiency, it also protects the system against water hammer action.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 80-1600/BQQE In-Line Circulator Pump IE3 - 3x230/400v - Single Phase - 16m Head is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1400 Ltr/min. The maximum head for this pump is 16m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 80-1200/BQQE In-Line Circulator Pump IE3 - 3x230/400v - Three Phase - 12m Head is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1200 Ltr/min. The maximum head for this pump is 12m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB DKLP 65-1600/BQQE In-Line Circulator Twin Pump IE3 - 3x230/400v - Three Phase - 16m Head is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 400 Ltr/min. The maximum head for this pump is 17m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 65-1600/BQQE In-Line Circulator Pump IE3 - 3x230/400v - Three Phase - 16m Head is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 500 Ltr/min. The maximum head for this pump is 16m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.