Dab

Note: The above unit cannot be connected directly to a water company water supply; it must be fed by a break tank to adhere to U.K water by-laws.

3 Year Warranty

The DAB ESYBOX Electronic Water Pressure System - 230V is a Pressurisation Unit item. This product is manufactured by Dab. Voltage for this item is 230V. It has an actual flow rate of 120 Ltr/min. The maximum head for this pump is 65m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The operating pressure of this is 8 Bar.

TECHNICAL DATA

Operating range: capacity up to 80 l/min; head up to 50 m

Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.

Liquid temperature range: from 0°C to +35°C for domestic use for other use: from 0°C to +40°C

Maximum suction depth: 8 meters

Maximum ambient temperature: +50°C

Maximum operating pressure: 7,5 Bar. (750 kPa)

Motor protection rating: IPX4

Insulation class: F

Installation: Horizontal or vertical fixed position

APPLICATIONS

ESYBOX mini is the DAB compact automatic pressurisation system for the water supply of a single dwelling. This product is manufactured by Dab. ESYBOX mini guarantees the comfort of constant pressure (Pressure Set Point adjustable from 1 up to 5 Bar.) inside the system, and energy savings thanks to the inverter technology. Appropriate for use with drinking water, in domestic systems, and in gardening applications. ESYBOX mini does not require any additional components for its installation.

The DAB ESYBOX Electronic Water Pressure System - Mini Version is a Pressure System item. It has an actual flow rate of 80 Ltr/min. The maximum head for this pump is 50m.

The operating pressure of this is 5 Bar.

Product Applications

The DAB KPS 30/16 M is a centrifugal peripheral pump engineered to be applied in domestic and residential environments for pressurization, rainwater re-use or gardening and irrigation. This product is manufactured by Dab.

Construction Includes Of The Pump

KPS has the pump body in cataphoresis Cast Iron, threaded inlet on the side.
Cast Iron support with brass shaving plate for KPS 30/16 and KPS 38/18 models.
Carbon-ceramic mechanical seal. Brass impeller.

Construction Features Of The Motor

Air-cooled asynchronous motor. Motor shaft in AISI 416 Stainless Steel.
Motor circuit breaker and permanent capacitor included as standard in the single-phase version.
Protection by the user for the three-phase versions.

The DAB KPS 30/16 M Centrifugal Peripheral Pump - 240v - Single Phase - 50 Ltr/min. is a Peripheral Pump item. Voltage for this item is 240V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 84m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB KPS 30/16 MB is a centrifugal peripheral pump appropriate for domestic installations, water supply systems, small gardening and irrigation applications, draining cisterns and even for some small industrial applications.

Construction Includes Of The Pump

Brass pump body and motor support for KP 60/6 and KP 60/12. This product is manufactured by Dab. Pump body with radial suction for KP and KPS; front suction for KPF. Cast Iron support with brass wear disc for KPS 30/16 and KP 38/18. KPS 30/16 is available on request with bronze pump body and support. Brass impeller. Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Closed asynchronous type, external ventilation cooling. Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability. Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions. For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations. Construction according to CEI 2-3 and CEI 61-69 (EN 60335-2-41).

The DAB KPS 30/16 MB Centrifugal Peripheral Pump - 240v - Single Phase - 50 Ltr/min. is a Peripheral Pump item. Voltage for this item is 240V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 84m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Application

Product Applications

The DAB KLP 40-900 T Is an in-line circulator pump, engineered for the circulation of hot or cold water and is appropriate for installation direct onto the pipework of civil and industrial heating, air conditioning, cooling and hot water plants.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
Flanged suction and delivery connections in PN10 with threaded holes for control pressure gauges. This product is manufactured by Dab. This range can also accept counterflanges in PN6 in order to facilitate pump interchange in existing installations.
Technopolymer impeller.
Carbon/ceramic mechanical seal.
The pumps are available in the single version(KLM-KLP)and in the twin version (DKLM-DKLP).
In the twin version an automatic clapet type valve incorporated in the delivery connection is provided to prevent water from recycling when the system is at a standstill.
The standard supply also includes a blank flange in case maintenance has to be carried out on one of the two motors.
The twin version allows the pumps to be applied alternately where a backup unit is required or used simultaneously.

Construction Features Of The Motor

Induction motor, closed and cooled with external ventilation, four-pole for the KLM and DKLM versions and two-pole for the KLP and DKLP versions.
Rotor mounted on oversized, greased-for-life ball bearings to guarantee silent running and long life.
Built-in thermal and overload protection and a capacitor permanently in circuit in the single-phase version.
Three-phase motors should be protected with a suitable overload protection complying with the regulations in force.
Manufactured according to CEI 2-3 standards.
Motor protection: IP55
Insulation class: F

- Operating range: from 2 to 67 m3/h with head up to 13,7 metres

- Liquid quality requirements: clean, free from solids or abrasive substances, non viscous,
non aggressive, non crystallized, chemically neutral, close to the characteristics of water.

- Liquid temperature range: from -15°C to +120°C

- Maximum ambient temperature: +40°C

- Maximum working pressure: 10 Bar. (1000 kPa)

- Standard flanges: DN 40, DN 50, DN 65, DN 80 in PN 6/PN 10 (4 slots)

- Flanges on request: DN 80 in PN16 (8 holes)

- Counterflanges on request:
threaded DN 40, DN 50, DN 65 in PN 6
with weld-on collar DN 40, DN 50, DN 65, DN 80 in PN6
with weld-on collar DN 40, DN 50, DN 65 in PN 10/PN 16 (4 holes)
with weld-on collar DN 80 in PN10/PN 16 (8 holes)

The DAB KLP 40-900 T In-Line Circulator Pump - 415v - Three Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB KLP 40-1200 T is an in-line circulator pump appropriate for circulating hot or cold water. This product is manufactured by Dab. Engineered for installation directly onto the pipework of civil and industrial heating, air conditioning, cooling and hot water plants.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
Flanged suction and delivery connections in PN10 with threaded holes for control pressure gauges. This range can also accept counterflanges in PN6 in order to facilitate pump interchange in existing installations.
Technopolymer impeller.
Carbon/ceramic mechanical seal.
The pumps are available in the single version(KLM-KLP)and in the twin version (DKLM-DKLP).
In the twin version an automatic clapet type valve incorporated in the delivery connection is provided to prevent water from recycling when the system is at a standstill.
The standard supply also includes a blank flange in case maintenance has to be carried out on one of the two motors.
The twin version allows the pumps to be applied alternately where a backup unit is required or used simultaneously.

Construction Features Of The Motor

Induction motor, closed and cooled with external ventilation, four-pole for the KLM and DKLM versions and two-pole for the KLP and DKLP versions.
Rotor mounted on oversized, greased-for-life ball bearings to guarantee silent running and long life.
Built-in thermal and overload protection and a capacitor permanently in circuit in the single-phase version.
Three-phase motors should be protected with a suitable overload protection complying with the regulations in force.
Manufactured according to CEI 2-3 standards.
Motor protection: IP55
Insulation class: F

- Operating range: from 2 to 67 m3/h with head up to 13,7 metres

- Liquid quality requirements: clean, free from solids or abrasive substances, non viscous,
non aggressive, non crystallized, chemically neutral, close to the characteristics of water.

- Liquid temperature range: from -15°C to +120°C

- Maximum ambient temperature: +40°C

- Maximum working pressure: 10 Bar. (1000 kPa)

- Standard flanges: DN 40, DN 50, DN 65, DN 80 in PN 6/PN 10 (4 slots)

- Flanges on request: DN 80 in PN16 (8 holes)

- Counterflanges on request:
threaded DN 40, DN 50, DN 65 in PN 6
with weld-on collar DN 40, DN 50, DN 65, DN 80 in PN6
with weld-on collar DN 40, DN 50, DN 65 in PN 10/PN 16 (4 holes)
with weld-on collar DN 80 in PN10/PN 16 (8 holes)

The DAB KLP 40-1200 T In-Line Circulator Pump - 415v - Three Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB Multi 4 SW M is a multi-stage self-priming pump appropriate for managing swimming pool with chlorine water or sea water or for gardening and irrigation in residential building service. This product is manufactured by Dab. Multi 4 SW is engineered to work with hydraulic pool cleaners and also to increase the pressure of salt water.

Construction Includes Of The Pump

Technopolymer pump body and impeller, AISI 316 Stainless Steel support and seal holder.

Construction Features Of The Motor

Motor shaft in AISI 316 Stainless Steel, air-cooled asynchronous motor, thermo-amperometric protection and permanent capacitor, (as standard in the single-phase version), protection by the user in the three-phase version. Carbon-ceramic mechanical seal.

The DAB Multi 4 SW M Multi-Stage Salt Water Pump - 240v - Single Phase - 90 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 240V. It has an actual flow rate of 90 Ltr/min. The maximum head for this pump is 46m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.