Dab

Product Applications

The DAB KPS 30/16 M is a centrifugal peripheral pump engineered to be applied in domestic and residential environments for pressurization, rainwater re-use or gardening and irrigation. This product is manufactured by Dab.

Construction Includes Of The Pump

KPS has the pump body in cataphoresis Cast Iron, threaded inlet on the side.
Cast Iron support with brass shaving plate for KPS 30/16 and KPS 38/18 models.
Carbon-ceramic mechanical seal. Brass impeller.

Construction Features Of The Motor

Air-cooled asynchronous motor. Motor shaft in AISI 416 Stainless Steel.
Motor circuit breaker and permanent capacitor included as standard in the single-phase version.
Protection by the user for the three-phase versions.

The DAB KPS 30/16 M Centrifugal Peripheral Pump - 240v - Single Phase - 50 Ltr/min. is a Peripheral Pump item. Voltage for this item is 240V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 84m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB KPS 30/16 MB is a centrifugal peripheral pump appropriate for domestic installations, water supply systems, small gardening and irrigation applications, draining cisterns and even for some small industrial applications.

Construction Includes Of The Pump

Brass pump body and motor support for KP 60/6 and KP 60/12. This product is manufactured by Dab. Pump body with radial suction for KP and KPS; front suction for KPF. Cast Iron support with brass wear disc for KPS 30/16 and KP 38/18. KPS 30/16 is available on request with bronze pump body and support. Brass impeller. Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Closed asynchronous type, external ventilation cooling. Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability. Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions. For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations. Construction according to CEI 2-3 and CEI 61-69 (EN 60335-2-41).

The DAB KPS 30/16 MB Centrifugal Peripheral Pump - 240v - Single Phase - 50 Ltr/min. is a Peripheral Pump item. Voltage for this item is 240V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 84m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Applications

Product Applications

The DAB EuroInox 40/30 M Is a Self-priming multistage horizontal centrifugal pump, featuring extremely silent running appropriate for domestic use for water supply and pressurisation, irrigation of gardens and vegetable gardens, and moving water in general.

Construction Includes Of The Pump

Pump body in Stainless Steel AISI 304.
Motor support in die-cast aluminium, seal holder in AISI 304 steel.
Mechanical seal in carbon/ceramic. This product is manufactured by Dab. Rotor shaft in AISI 304 steel.
Rotors, diffuser bodies and diffusers in technopolymer.
Adjustment rings in Stainless Steel.

Construction Features Of The Motor

Continuous service asynchronous motor.
Incorporated thermal current protection and permanently connected capacitor in the single-phase version.
The user must provide overload protection for the three-phase version.
Protection level of motor: IP 44
Protection level of terminal board: IP 55
Insulation class: F

- Operating range: from 10 to 120 l/min. with a head of up to 56 m.

- Pumped liquid characteristics: clean, free from solid or abrasive substances, not viscous,
not aggressive, not crystallised, chemically neutral and close to the characteristics of water.

- Liquid temperature range:
from 0°C to +35°C C for domestic use (EN 60335-2-41)
from 0°C to +40°C for other uses.

- Maximum ambient temperature: +40°C

- Maximum operating pressure: 8 Bar. (800 kPa)

- Installation: fixed or portable in a horizontal position

The DAB EUROINOX 40/30 M Centrifugal Multi-Stage Pump - 240v - Single Phase - 57 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 240V. It has an actual flow rate of 57 Ltr/min. The maximum head for this pump is 56m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB KPS 30/16 T Is a centrifugal peripheral pump engineered to be applied in domestic and residential environments for pressurization, rainwater reuse or gardening and irrigation. This product is manufactured by Dab.

Construction Includes Of The Pump

KPS has the pump body in cataphoresis Cast Iron, threaded inlet on the side. Cast Iron support with brass shaving plate for KPS 30/16 and KPS 38/18 models. Carbon-ceramic mechanical seal. Brass impeller.

Construction Features Of The Motor

Air-cooled asynchronous motor. Motor shaft in AISI 416 Stainless Steel. Motor circuit breaker and permanent capacitor included as standard in the single-phase version. Protection by the user for the three-phase versions.

The DAB KPS 30/16 T Centrifugal Peripheral Pump - 415v - Three Phase - 50 Ltr/min. is a Peripheral Pump item. Voltage for this item is 400V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 84m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

NKVE are AISI 304 Stainless Steel multi-impeller vertical centrifugal pumps with coupling; with MCE-P variable frequency drive installed as standard. This product is manufactured by Dab. The pumps are engineered for pressurization in civil and commercial environments, they can also be applied in agriculture and in watering systems. Possibility of remote control with D.Connect (D.Connect Box supplied separately).

Construction Includes Of The Pump

The use of advanced Stainless Steel processing technologies for the main hydraulic components helps to achieve very high performance levels.
The pumps are extremely versatile, thanks to the center distance of the in-line ports, designed to maximize interchangeability.
The parts in contact with the liquid are made of AISI 304 Stainless Steel for NKV S models, or AISI 316 Stainless Steel for NKV X models (only available in special order).
Round flanges as standard (oval, loose, virtual, clamp available on request).
The mechanical seal is made of standard E1 = Graphite/Silicon Carbide/AISI 316/EPDM = BQGE.
FKM/Viton available on request.
Starting from 5,5 KW models, the seal can be removed without removing the motor.
Rigid coupling.

Construction Features Of The Motor

Air-cooled asynchronous motor.
Standard two-pole motor, IE3 50 Hz 0,75 KW or IE2, IE3 60 Hz 0,75 KW.
Motor frame B14 up to 4 KW motor size, motor frame B5 from 5,5 KW motor size.

Construction Features Of The Electronics

The use of the MCE-P variable frequency drive has many advantages: better comfort thanks to the constant pressure at the variation of demand (pressure sensor installed as standard), increased efficiency, energy savings, protection from hammering effects, simpler configuration thanks to the display.
It makes it possible to set a setpoint in case of units with several pumps (each with MCE-P variable frequency drive), or to start a different pump at each restart or at set intervals.
It must be installed on the motor fan cover, also to take advantage of its cooling capabilities.

The DAB NKVE 15/06 S 055 T MCE55/P-IE3 Multi-Stage Centrifugal Pump - 415v - Three Phase - 417 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 400V. It has an actual flow rate of 417 Ltr/min. The maximum head for this pump is 88m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Self-priming single-impeller (JetCom SP) pumps or multi-impeller (EuroCom SP) pumps appropriate for pumping water from swimming pools or for use with hydraulic cleaners in residential building service.

Construction Includes Of The Pump

Technopolymer pump body and impeller, AISI 316 Stainless Steel support and seal holder.

Construction Features Of The Motor

Motor shaft in AISI 316 Stainless Steel, air-cooled asynchronous motor, thermo-amperometric protection and permanent capacitor as standard in the single-phase version, protection by the user in the three-phase version. This product is manufactured by Dab. Carbon-ceramic mechanical seal.

The DAB JETCOM SP 102 M Swimming Pool Pump - 240v - Single Phase - 90 Ltr/min. - Obsolete is a Swimming Pool Pump item. Voltage for this item is 240V. It has an actual flow rate of 90 Ltr/min. The maximum head for this pump is 54m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Peripheral centrifugal pumps for use in residential building service engineered for pressurization, rainwater reuse and gardening and irrigation. This product is manufactured by Dab. KPF has the threaded inlet on the front. Air-cooled asynchronous motor. Brass impeller. Motor shaft in AISI 416 Stainless Steel. Motor circuit breaker and permanent capacitor included as standard in the single-phase version. Protection by the user for the three-phase versions.

Construction Includes Of The Pump

KPF has the threaded inlet on the front. Carbon-ceramic mechanical seal. Brass impeller.

Construction Features Of The Motor

Air-cooled asynchronous motor. Motor shaft in AISI 416 Stainless Steel.Motor circuit breaker and permanent capacitor included as standard in the single-phase version.Protection by the user for the three-phase versions.

The DAB KPF 30/16 M Centrifugal Peripheral Pump - 240v - Single Phase - 50 Ltr/min. is a Peripheral Pump item. Voltage for this item is 240V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 84m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.