Dab

Product Applications

The DAB KPS 30/16 MB is a centrifugal peripheral pump appropriate for domestic installations, water supply systems, small gardening and irrigation applications, draining cisterns and even for some small industrial applications.

Construction Includes Of The Pump

Brass pump body and motor support for KP 60/6 and KP 60/12. This product is manufactured by Dab. Pump body with radial suction for KP and KPS; front suction for KPF. Cast Iron support with brass wear disc for KPS 30/16 and KP 38/18. KPS 30/16 is available on request with bronze pump body and support. Brass impeller. Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Closed asynchronous type, external ventilation cooling. Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability. Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions. For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations. Construction according to CEI 2-3 and CEI 61-69 (EN 60335-2-41).

The DAB KPS 30/16 MB Centrifugal Peripheral Pump - 240v - Single Phase - 50 Ltr/min. is a Peripheral Pump item. Voltage for this item is 240V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 84m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The DAB K 35/40 M is a compact centrifugal pump from the trusted, accredited manufacturer DAB. It is designed to move small volumes of clean water at relatively high pressure, making it well-suited to industrial duties where additional head or discharge pressure is required.

As with all centrifugal pumps, correct priming is essential before start-up. The pump must be filled with water so it can begin operating immediately and to help protect internal components.

• Fit a suction hose with a check valve (non-return valve)
• Fully fill the suction hose with water
• Fill the pump casing completely with water before switching on

• Connections: 1" delivery x 1" suction
• Maximum suction lift: up to 8 metres
• Maximum head: 40 metres (equivalent to 4.0 Bar)

The DAB K 35/40 M Twin-Impeller Centrifugal Pump - 240v - Single Phase is a Centrifugal Pump item. Voltage for this item is 240V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB EuroInox 30/50 M is a self-priming multistage horizontal centrifugal pump, featuring extremely silent running appropriate for domestic use for water supply and pressurisation, irrigation of gardens and vegetable gardens, and moving water in general.

Construction Includes Of The Pump

Pump body in Stainless Steel AISI 304.
Motor support in die-cast aluminium, seal holder in AISI 304 steel.
Mechanical seal in carbon/ceramic. This product is manufactured by Dab. Rotor shaft in AISI 304 steel.
Rotors, diffuser bodies and diffusers in technopolymer.
Adjustment rings in Stainless Steel.

Construction Features Of The Motor

Continuous service asynchronous motor.
Incorporated thermal current protection and permanently connected capacitor in the single-phase version.
The user must provide overload protection for the three-phase version.
Protection level of motor: IP 44
Protection level of terminal board: IP 55
Insulation class: F

The DAB EUROINOX 30/50 M Centrifugal Multi-Stage Pump - 240v - Single Phase - 2001 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 240V. It has an actual flow rate of 2001 Ltr/min. The maximum head for this pump is 72m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB ALP 800 M is an in-line circulation pump appropriate for hot or cold water with in-line connections,

Construction Includes Of The Pump

Pump body and motor support in Cast Iron for ALM 500 and ALP 2000 and in bronze for ALM 200 and ALP 800.
Intake and delivery connection: 1" 1/2 M-GAS for ALM 200 and ALP 800 and 2" M-GAS for ALM 500 and ALP 2000.
Technopolymer impeller. This product is manufactured by Dab. Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Induction motor, closed and cooled with external ventilation, four-pole for the ALM version and two-pole for the ALP version.
Rotor mounted on oversized, greased-for-life ball bearings to guarantee silent running and long life.
Built-in thermal and overload protection and a capacitor permanently in circuit in the single-phase version.
Three-phase motors should be protected with a suitable overload protection complying with the regulations in force.
Manufactured according to CEI 2-3 standards.
Motor protection: IP55
Insulation class: F

The DAB ALP 800 M In-Line Circulator Pump - 240v - Single Phase - 140 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It has an actual flow rate of 140 Ltr/min. The maximum head for this pump is 21m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Application

Product Applications

The DAB EuroInoX 40/80 M is a self-priming multistage horizontal centrifugal pump, featuring extremely silent running appropriate for domestic use for water supply and pressurisation, irrigation of gardens and vegetable gardens, and moving water in general.

Construction Includes Of The Pump

Pump body in Stainless Steel AISI 304.
Motor support in die-cast aluminium, seal holder in AISI 304 steel.
Mechanical seal in carbon/ceramic. This product is manufactured by Dab. Rotor shaft in AISI 304 steel.
Rotors, diffuser bodies and diffusers in technopolymer.
Adjustment rings in Stainless Steel.

Construction Features Of The Motor

Continuous service asynchronous motor.
Incorporated thermal current protection and permanently connected capacitor in the single-phase version.
The user must provide overload protection for the three-phase version.
Protection level of motor: IP 44
Protection level of terminal board: IP 55
Insulation class: F

The DAB EUROINOX 40/80 M Centrifugal Multi-Stage Pump - 240v - Single Phase - 2001 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 240V. It has an actual flow rate of 2001 Ltr/min. The maximum head for this pump is 72m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB EUROINOX 30/80 M is a self-priming centrifugal pump featuring extremely silent running, Making it appropriate for domestic use for water supply and pressurization, irrigation of gardens and vegetable gardens, and moving water in general.

Construction Includes Of The Pump

Pump body in Stainless Steel AISI 304.
Motor support in die-cast aluminium, seal holder in AISI 304 steel.
Mechanical seal in carbon/ceramic. This product is manufactured by Dab. Rotor shaft in AISI 304 steel.
Rotors, diffuser bodies and diffusers in technopolymer.
Adjustment rings in Stainless Steel.

Construction Features Of The Motor

Continuous service asynchronous motor.
Incorporated thermal current protection and permanently connected capacitor in the single-phase version.
The user must provide overload protection for the three-phase version.
Protection level of motor: IP 44
Protection level of terminal board: IP 55
Insulation class: F

- Operating range: from 10 to 120 l/min. with a head of up to 72 m.

- Pumped liquid characteristics: clean, free from solid or abrasive substances, not viscous,
not aggressive, not crystallised, chemically neutral and close to the characteristics of water.

- Liquid temperature range:
from 0°C to +35°C C for domestic use (EN 60335-2-41)
from 0°C to +40°C for other uses.

- Maximum ambient temperature: +40°C

- Maximum operating pressure: 8 Bar. (800 kPa)

- Installation: fixed or portable in a horizontal position

The DAB EUROINOX 30/80 M Centrifugal Multi-Stage Pump - 240v - Single Phase - 2001 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 240V. It has an actual flow rate of 2001 Ltr/min. The maximum head for this pump is 72m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 40-1200/BQQE In-Line Circulator Pump - 240v - Single Phase - IE2 (1x220/240v), 0.55KW is a Circulator Pump item. Voltage for this item is 240V. It has an actual flow rate of 240 Ltr/min. The maximum head for this pump is 13.7m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB NOVA Submersible Salt Water Pump has been specifically built for draining salt water applications. This product is manufactured by Dab. It may be applied as a portable pump in emergency situations.

Construction Includes Of The Pump

Hydro resistant technopolymer pump body, cover, and suction grid.
AISI 316 Stainless Steel motor, rotor shaft, and bolts and screws.
Cable with tin plated conductors.

Construction Features Of The Motor

Submersible type continuous duty asynchronous motor.
Thermal overheating protection.

The DAB NOVA Submersible Salt Water Pump - 240v - Single Phase - 125 Ltr/min. is a Submersible product. Voltage for this item is 240V. It has an actual flow rate of 125 Ltr/min. The maximum head for this pump is 6m.