Dab

Product Applications

NKVE are AISI 304 Stainless Steel multi-impeller vertical centrifugal pumps with coupling; with MCE-P variable frequency drive installed as standard. This product is manufactured by Dab. The pumps are engineered for pressurization in civil and commercial environments, they can also be applied in agriculture and in watering systems. Possibility of remote control with D.Connect (D.Connect Box supplied separately).

Construction Includes Of The Pump

The use of advanced Stainless Steel processing technologies for the main hydraulic components helps to achieve very high performance levels.
The pumps are extremely versatile, thanks to the center distance of the in-line ports, designed to maximize interchangeability.
The parts in contact with the liquid are made of AISI 304 Stainless Steel for NKV S models, or AISI 316 Stainless Steel for NKV X models (only available in special order).
Round flanges as standard (oval, loose, virtual, clamp available on request).
The mechanical seal is made of standard E1 = Graphite/Silicon Carbide/AISI 316/EPDM = BQGE.
FKM/Viton available on request.
Starting from 5,5 KW models, the seal can be removed without removing the motor.
Rigid coupling.

Construction Features Of The Motor

Air-cooled asynchronous motor.
Standard two-pole motor, IE3 50 Hz 0,75 KW or IE2, IE3 60 Hz 0,75 KW.
Motor frame B14 up to 4 KW motor size, motor frame B5 from 5,5 KW motor size.

Construction Features Of The Electronics

The use of the MCE-P variable frequency drive has many advantages: better comfort thanks to the constant pressure at the variation of demand (pressure sensor installed as standard), increased efficiency, energy savings, protection from hammering effects, simpler configuration thanks to the display.
It makes it possible to set a setpoint in case of units with several pumps (each with MCE-P variable frequency drive), or to start a different pump at each restart or at set intervals.
It must be installed on the motor fan cover, also to take advantage of its cooling capabilities.

The DAB NKVE 15/06 S 055 T MCE55/P-IE3 Multi-Stage Centrifugal Pump - 415v - Three Phase - 417 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 400V. It has an actual flow rate of 417 Ltr/min. The maximum head for this pump is 88m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Twin-impeller centrifugal pump engineered for use in pressurisation units for water supply systems and for supplying pressurised tanks.
Appropriate also for sprinkling irrigation and other water supply applications.

Construction Features Of The Pump

Cast Iron pump body and motor support.
Technopolymer impeller.
Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Induction motor, closed and cooled with external ventilation.
Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life.
Built-in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.
Three-phase motors should be protected with a appropriate overload protection complying with the regulations in force.
Manufactured according to CEI 2-3 standards.
Motor protection: IP55, IP 44 for the models K 35/40, K 45/50, K 55/50, K 35/100, K 40/100.
Terminal box protection: IP55
Insulation class: F

The DAB K 80/300 T-IE3 Twin Impeller Centrifugal Pump - 415v - Three Phase is a Centrifugal Pump item. This product is manufactured by Dab. Voltage for this item is 400V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Single impeller centrifugal pump appropriate for domestic, civil, industrial and agricultural installations and for decanting, mixing and irrigating uses.

Construcitonal Includes Of The Pump

Cast Iron pump body and motor support.
Technopolymer impeller for K 20/41, K 30/70, K 30/100, K 36/100, K 12/200, K 36/200, K 40/200, K 55/200.
Cast Iron impeller for K 14/400, K 11/500, K 18/500, K 28/500, K 40/400, K 50/400, K 30/800, K 40/800, K 50/800, K 20/1200, K 25/1200, K 35/1200.
Carbon/ceramic mechanical seal.

Construcitonal Features Of The Motor

Induction motor, closed and cooled with external ventilation.
Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life.
Built-in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.
Three-phase motors should be protected with a suitable overload protection complying with the regulations in force.
Manufactured according to CEI 2-3 standards.
Motor protection: IP44 (IP 55 for motor to 2,2 - 3 - 4 - 5,5 - 7,5 - 9,2 - 11 kW)
Terminal box protection: IP55
Insulation class: F

The DAB K 28/500 T-IE3 Single Impeller Centrifugal Pump - 415v - Three Phase is a Centrifugal Pump item. This product is manufactured by Dab. Voltage for this item is 400V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Single impeller centrifugal pump appropriate for domestic, civil, industrial and agricultural installations and for decanting, mixing and irrigating uses.

Constructional Includes Of The Pump

Cast Iron pump body and motor support.
Technopolymer impeller for K 20/41, K 30/70, K 30/100, K 36/100, K 12/200, K 36/200, K 40/200, K 55/200.
Cast Iron impeller for K 14/400, K 11/500, K 18/500, K 28/500, K 40/400, K 50/400, K 30/800, K 40/800, K 50/800, K 20/1200, K 25/1200, K 35/1200.
Carbon/ceramic mechanical seal.

Constructional Features Of The Motor

Induction motor, closed and cooled with external ventilation.
Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life.
Built-in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.
Three-phase motors should be protected with a suitable overload protection complying with the regulations in force.
Manufactured according to CEI 2-3 standards.
Motor protection: IP44 (IP 55 for motor to 2,2 - 3 - 4 - 5,5 - 7,5 - 9,2 - 11 kW)
Terminal box protection: IP55
Insulation class: F

- Operating range: from 1.8 to 96 m3/h with head up to 62 metres

- Liquid quality requirements: clean, free from solids or abrasive substances, non viscous, non aggressive, non crystallized, chemically neutral, close to the characteristics of water.

- Liquid temperature range:
K 20/41, K 30/70, K 30/100, K 36/100
K 12/200, K 36/200, K 40/200 : from -10°C to +50°C
The rest of the range : from -15°C to +110°C

- Maximum ambient temperature: +40°C

The DAB K 30/70 M Single Impeller Centrifugal Pump - 240v - Single Phase is a Centrifugal Pump item. This product is manufactured by Dab. Voltage for this item is 400V. The maximum head for this pump is 102m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Hot or cold water circulation pump with in-line ports, appropriate for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Includes Of The Pump

Pump body and motor support in Cast Iron.

PN 10 flanged suction and delivery ports with threaded holes for control manometers. This product is manufactured by Dab. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.

Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.

The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.

Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB DKLP 50-1200 T IE3 Twin Head In-Line Circulator Pump - 415v - Three Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Circulating pumps with IN-LINE connections, appropriate for civil and industrial installations for heating, conditioning, refrigeration and hot water for plumbing. This product is manufactured by Dab. Available in single and twin version.

Construction Includes

Flanged suction and delivery connections in PN 16 with threaded holes for control pressure gauges. Cast Iron pump casing and motor support, Cast Iron and technopolymer impeller. Stainless Steel motor shaft, and SEE "SHAFT SEAL" SECTION mechanical seal. Asynchronous threephase motor, 2 poles, closed and cooled with external ventilation.

Protection: IP 55
Insulation class: F

- Operating range: from 3,6 to 420 m3/h with head up to 102 metres

- Liquid quality requirements: clean, free from solids or abrasive substances, non viscous,
non aggressive, non crystallized, chemically neutral, close to the characteristics of water.

The DAB DCP-G 100-3050/A/BAQE/15-IE3 Twin Head In-Line Circulator Pump - 400v - Three Phase - 7005 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 7005 Ltr/min. The maximum head for this pump is 102m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Twin-impeller centrifugal pump engineered for use in pressurisation units for water supply systems and for supplying pressurised tanks.

Appropriate also for sprinkling irrigation and other water supply applications. This product is manufactured by Dab.

Construction Features Of The Pump

Cast Iron pump body and motor support. Technopolymer impeller. Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Induction motor, closed and cooled with external ventilation. Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life.

Built-in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version. Three-phase motors should be protected with a appropriate overload protection complying with the regulations in force.

Manufactured according to CEI 2-3 standards. Motor protection: IP55, IP 44 for the models K 35/40, K 45/50, K 55/50, K 35/100, K 40/100.

Terminal box protection: IP55 Insulation class: F

The DAB K 66/100 T-IE3 Twin Impeller Centrifugal Pump - 415v - Three Phase is a Centrifugal Pump item. Voltage for this item is 400V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Submersible pumps appropriate for pumping waste water and sewage from private and commercial dwellings and municipal sewer networks, in accordance with European standard EN 12050-1.

With full free passage Cast Iron vortex impeller with new anti-clogging profile,

Double cartridge mechanical seal as standard in SiC/SiC silicon carbide on the hydraulics side and SiC/C silicon carbide on the motor side, independent of the rotation direction. This product is manufactured by Dab. Discharge flange available in DN65, DN80, DN100 versions according to EN 1092-1.

High efficiency three-phase asynchronous motor with squirrel cage rotor, efficiency class IE3. Appropriate for use with liquids with pH between 6.5 and 12. Maximum number of starts per hour: 20. S1 motor for fully submerged continuous operation or S3 for discontinuous operation with minimum immersion levels.

Water infiltration sensor in oil chamber, capable of indicating water infiltrations through the mechanical seal (Optional). Overtemperature sensors in the motor windings with intervention threshold at 150°C.

Long-life lubricated bearings for a calculated minimum useful life of 50,000 hours. Stainless Steel motor shaft, engineered with high fatigue strength. Nominal power from 1.1 KW to 11 kW. ATEX version available for use in potentially explosive environments. Maximum installation depth: 20 metres (with cable of appropriate length). For use at liquid temperatures above +40°C.

The DAB FKV 80.15.4 T5 400D Submersible Wastewater Pump - 415v - Three Phase - 1200 Ltr/min. is a Submersible product. Voltage for this item is 400V. It has an actual flow rate of 1200 Ltr/min. The maximum head for this pump is 9.5m.

Vertical multistage centrifugal pump appropriate for use in small and medium water supply installations. This product is manufactured by Dab. Appropriate for pressurization units, surge tank supply, rain irrigation and crop-dusting systems, fire-fighting and washing systems, conveyance of condensate and cooling water.

InNOVAtive and durable design. Technopolymer discharge/suction bodies and in-line suction and discharge ports with threaded metal insert. Impellers, diffuser bodies and diffusers in technopolymer, fully rust-proof.

Stainless Steel AISI 303 pump jacket, adjustment rings and seal disk. Carbon/ceramic mechanical seal, fitted on the AISI 303 stainless-steel drive shaft extension. Asynchronous, closed motor cooled by external ventilation.

Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life. Built-in thermal and current overload protection and a capacitor permanently on in the singlephase version. Protection for the three-phase version is the responsibility of the user. Built in CEI 2-3/CEI 61/69 (EN 60335-2-41) standards.

The DAB KVC 60-120 T-IE3 Centrifugal Multi-Stage Pump - 415v - Three Phase is a Centrifugal Pump item. Voltage for this item is 400V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Single impeller centrifugal pupm appropriate for domestic, civil, industrial and agricultural installations and for decanting, mixing and irrigating uses. This product is manufactured by Dab. Cast Iron pump body and motor support. Technopolymer or Cast Iron impeller (depending on the models). Stainless Steel driving shaft.

Carbon/ceramic mechanical seal. Asynchronous, closed motor, cooled by external ventilation. Built-in thermal and current overload protection and a capacitor permanently on in the singlephase version.

For the protection of the three-phase motor it is advisable to use a suitable overload protection complying with the regulations in force.

Product Applications

Single impeller centrifugal pump

Construction Includes Of The Pump

Cast Iron pump body and motor support. Technopolymer impeller for K 20/41, K 30/70, K 30/100, K 36/100, K 12/200, K 36/200, K 40/200, K 55/200. Cast Iron impeller for K 14/400, K 11/500, K 18/500, K 28/500, K 40/400, K 50/400, K 30/800, K 40/800, K 50/800, K 20/1200, K 25/1200, K 35/1200. Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Induction motor, closed and cooled with external ventilation.Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life.Built-in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.Three-phase motors should be protected with a suitable overload protection complying with the regulations in force.Manufactured according to CEI 2-3 standards.Motor protection: IP44 (IP 55 for motor to 2,2 - 3 - 4 - 5,5 - 7,5 - 9,2 - 11 kW)Terminal box protection: IP55Insulation class: F

The DAB K 40/400 T-IE3 Single-Impeller Centrifugal Pump - 415v - Three Phase is a Centrifugal Pump item. Voltage for this item is 400V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Hot or cold water circulation pump with in-line ports, appropriate for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron. This product is manufactured by Dab. PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges. Technopolymer impeller. Carbon/ceramic mechanical seal.

The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions. For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle.

A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors. The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

Pump body and motor support in Cast Iron. PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges. Technopolymer impeller. Carbon/ceramic mechanical seal. The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions. For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be used during maintenance of one of the two motors. The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

The DAB DKLM 80-600 T IE3 Twin Head In-Line Circulator Pump - 415v - Three Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Multi-impeller vertical centrifugal pumps in AISI 304 Stainless Steel with coupling with MCE-P variable frequency drive installed, engineered for pressurization activities in civil and commercial building service, in agriculture and in irrigation systems, in washing systems.

The pumps are particularly versatile, thanks to the use of the MCE-P variable frequency drive, which ensures performance levels capable of automatically adapting to the different needs of the system, keeping a constant pressure. This product is manufactured by Dab. All parts in contact with the liquid are in AISI 304 Stainless Steel (on request in AISI 316 Stainless Steel, for X versions).

Standardized flanges and standard-sized center distances to facilitate pump replacement. Removable cartridge mechanical seal, it is removable without removing the motor.

Construction Includes Of The Pump

The use of advanced Stainless Steel processing technologies for the main hydraulic components helps to achieve very high performance levels. The pumps are extremely versatile, thanks to the center distance of the in-line ports, designed to maximize interchangeability. The parts in contact with the liquid are made of AISI 304 Stainless Steel for NKV S models, or AISI 316 Stainless Steel for NKV X models (only available in special order). Round flanges as standard (oval, loose, virtual, clamp available on request). The mechanical seal is made of standard E1 = Graphite/Silicon Carbide/AISI 316/EPDM = BQGE. FKM/Viton available on request. Starting from 5,5 KW models, the seal can be removed without removing the motor. Rigid coupling.

Construction Features Of The Motor

Air-cooled asynchronous motor. Standard two-pole motor, IE3 50 Hz 0,75 KW or IE2, IE3 60 Hz 0,75 KW. Motor frame B14 up to 4 KW motor size, motor frame B5 from 5,5 KW motor size.

Construction Features Of The Electronics

The use of the MCE-P variable frequency drive has many advantages: better comfort thanks to the constant pressure at the variation of demand (pressure sensor installed as standard), increased efficiency, energy savings, protection from hammering effects, simpler configuration thanks to the display.It makes it possible to set a setpoint in case of units with several pumps (each with MCE-P variable frequency drive), or to start a different pump at each restart or at set intervals.It must be installed on the motor fan cover, also to take advantage of its cooling capabilities.

The DAB NKVE 20/03 S 030 T MCE30/P-IE3 Multi-Stage Centrifugal Pump - 415v - Three Phase - 483 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 400V. It has an actual flow rate of 483 Ltr/min. The maximum head for this pump is 43m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Hot or cold water circulation pump with in-line ports, appropriate for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron. This product is manufactured by Dab. PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges. Technopolymer impeller. Carbon/ceramic mechanical seal. The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.

For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors. The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions. Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.

Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions. For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations. Construction according to CEI 2-3. Protection class: IP 55 Insulation class: F Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 65-2000 T In-Line Circulator Pump - 415v - Three Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Self-priming centrifugal pumps, engineered for pressurization, gardening and irrigation activities and underground extraction (also from wells) and rainwater reuse in residential building service.

Product Applications

Vertical multistage centrifugal pump appropriate for small to medium user water systems. This product is manufactured by Dab. Suitable for pressurization units, filling of pressure vessels, sprinkler and watering systems, fire-fighting and washing systems, channelling of condensate and cooling water. InNOVAtive and robust design.

Construction Includes Of The Pump

KVC: Technopolymer delivery and suction bodies, and in-line suction and delivery ports with threaded metal insert.
KVCX: technopolymer suction body with threaded metal insert; Stainless Steel threaded delivery port on pump liner.
Impellers, diffuser bodies and diffusers in technopolymer, fully rust-proof. AISI 304 Stainless Steel pump liner, adjustment rings and seal disc. Carbon/ceramic mechanical seal, fitted on the AISI 303 stainless-steel drive shaft extension.

Construction Features Of The Motor

Closed asynchronous type, external ventilation cooling. Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability. Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions. Overload protection to be provided by the user for the three-phase version. Construction according to CEI 2-3 / CEI 61-69 (EN 60335-2-41).

The DAB KVC 35-120 T-IE3 Centrifugal Multi-Stage Pump - 415v - Three Phase is a Centrifugal Pump item. Voltage for this item is 400V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 80-1600/BQQE In-Line Circulator Pump IE3 - 3x230/400v - Single Phase - 16m Head is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1400 Ltr/min. The maximum head for this pump is 16m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.