Dab

Product Applications

The DAB EuroInox 30/30 M is a self-priming multistage horizontal centrifugal pump, featuring extremely silent running appropriate for domestic use for water supply and pressurisation, irrigation of gardens and vegetable gardens, and moving water in general.

Construction Includes Of The Pump

Pump body in Stainless Steel AISI 304.
Motor support in die-cast aluminium, seal holder in AISI 304 steel.
Mechanical seal in carbon/ceramic. This product is manufactured by Dab. Rotor shaft in AISI 304 steel.
Rotors, diffuser bodies and diffusers in technopolymer.
Adjustment rings in Stainless Steel.

Construction Features Of The Motor

Continuous service asynchronous motor.
Incorporated thermal current protection and permanently connected capacitor in the single-phase version.
The user must provide overload protection for the three-phase version.
Protection level of motor: IP 44
Protection level of terminal board: IP 55
Insulation class: F

- Operating range: from 10 to 120 l/min. with a head of up to 72 m.

- Pumped liquid characteristics: clean, free from solid or abrasive substances, not viscous,
not aggressive, not crystallised, chemically neutral and close to the characteristics of water.

- Liquid temperature range:
from 0°C to +35°C C for domestic use (EN 60335-2-41)
from 0°C to +40°C for other uses.

- Maximum ambient temperature: +40°C

- Maximum operating pressure: 8 Bar. (800 kPa)

- Installation: fixed or portable in a horizontal position

The DAB EUROINOX 30/30 M Centrifugal Multi-Stage Pump - 240v - Single Phase - 2001 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 240V. It has an actual flow rate of 2001 Ltr/min. The maximum head for this pump is 72m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB EuroInox 40/30 M Is a Self-priming multistage horizontal centrifugal pump, featuring extremely silent running appropriate for domestic use for water supply and pressurisation, irrigation of gardens and vegetable gardens, and moving water in general.

Construction Includes Of The Pump

Pump body in Stainless Steel AISI 304.
Motor support in die-cast aluminium, seal holder in AISI 304 steel.
Mechanical seal in carbon/ceramic. This product is manufactured by Dab. Rotor shaft in AISI 304 steel.
Rotors, diffuser bodies and diffusers in technopolymer.
Adjustment rings in Stainless Steel.

Construction Features Of The Motor

Continuous service asynchronous motor.
Incorporated thermal current protection and permanently connected capacitor in the single-phase version.
The user must provide overload protection for the three-phase version.
Protection level of motor: IP 44
Protection level of terminal board: IP 55
Insulation class: F

- Operating range: from 10 to 120 l/min. with a head of up to 56 m.

- Pumped liquid characteristics: clean, free from solid or abrasive substances, not viscous,
not aggressive, not crystallised, chemically neutral and close to the characteristics of water.

- Liquid temperature range:
from 0°C to +35°C C for domestic use (EN 60335-2-41)
from 0°C to +40°C for other uses.

- Maximum ambient temperature: +40°C

- Maximum operating pressure: 8 Bar. (800 kPa)

- Installation: fixed or portable in a horizontal position

The DAB EUROINOX 40/30 M Centrifugal Multi-Stage Pump - 240v - Single Phase - 57 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 240V. It has an actual flow rate of 57 Ltr/min. The maximum head for this pump is 56m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB KVCX 35-120 M is a Vertical multistage centrifugal pump appropriate for use in small and medium water supply installations. This product is manufactured by Dab. Appropriate for pressurization units, surge tank supply, rain irrigation and crop-dusting systems, fire-fighting and washing systems, conveyance of condensate and cooling water. InNOVAtive and robust design.

Construction Includes Of The Pump

KVC: Technopolymer discharge/suction bodies and in-line suction and discharge ports with threaded metal insert.
KVCX: technopolymer suction body with threaded metal insert; Stainless Steel threaded delivery port on pump jacket.
Impellers, diffuser bodies and diffusers in technopolymer, fully rust-proof.
Stainless Steel AISI 304 pump jacket, adjustment rings and seal disk.
Carbon/ceramic mechanical seal, fitted on the AISI 303 stainless-steel drive shaft extension.

Construction Features Of The Motor

Asynchronous, closed motor cooled by external ventilation.
Rotor mounted on oversized greased sealed-forlife ball bearings to ensure silent running and long life.
Built-in thermal and current overload protection and a capacitor permanently on in the single-phase version.
Protection for the three-phase version is the responsibility of the user.
Built in CEI 2-3/CEI 61/69 (EN 60335-2-41) standards.
Level of protection: IP 55
Insulation class: F

TECHNICAL DATA

- Operating range: from 50 to 200 l/min with head up to 113 m.

- Pumped liquid: clean, free from solids or abrasive substances, not viscous, not aggressive,
not crystallised and chemically neutral and close to the characteristics of water.

- Liquid temperature range:
from 0°C to +35°C for domestic use (EN 60335-2-41 safety standards).
from 0°C to +40°C for other uses.

- Max ambient temperature: +40°C

- Max working pressure: 12 Bar. (1200 kPa).

- Installation: fixed, in vertical or horizontal position, providing that the motor is positioned
above the pump.

The DAB KVCX 35-120 M Centrifugal Multi-Stage Pump - 240v - Single Phase is a Centrifugal Pump item. Voltage for this item is 240V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB K 30/100 M is a single impeller centrifugal pump appropriate for domestic, civil, industrial and agricultural installations and for decanting, mixing and irrigating uses.

Construction Includes Of The Pump

Cast Iron pump body and motor support.
Technopolymer impeller for K 20/41, K 30/70, K 30/100, K 36/100, K 12/200, K 36/200, K 40/200, K 55/200.
Cast Iron impeller for K 14/400, K 11/500, K 18/500, K 28/500, K 40/400, K 50/400, K 30/800, K 40/800, K 50/800, K 20/1200, K 25/1200, K 35/1200.
Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Induction motor, closed and cooled with external ventilation.
Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life.
Built-in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.
Three-phase motors should be protected with a suitable overload protection complying with the regulations in force.
Manufactured according to CEI 2-3 standards.
Motor protection: IP44 (IP 55 for motor to 2,2 - 3 - 4 - 5,5 - 7,5 - 9,2 - 11 kW)
Terminal box protection: IP55
Insulation class: F

- Operating range: from 1.8 to 96 m3/h with head up to 62 metres

- Liquid quality requirements: clean, free from solids or abrasive substances, non viscous, non aggressive, non crystallized, chemically neutral, close to the characteristics of water.

- Liquid temperature range:
K 20/41, K 30/70, K 30/100, K 36/100
K 12/200, K 36/200, K 40/200 : from -10°C to +50°C
The rest of the range : from -15°C to +110°C

- Maximum ambient temperature: +40°C

- Maximum operating pressure:
K 20/41, K 30/70, K 30/100,
K 36/100, K 12/200, K 14/400 : 6 Bar. (600 kPa)
K 36/200, K 40/200, K 55/200,
K 11/500, K 18/500, K 28/500 : 8 Bar. (800 kPa)
K 40/400, K 50/400, K 30/800, K 40/800,
K 50/800, K 20/1200, K 25/1200, K 35/1200 : 10 Bar. (1000 kPa)

- Installation: fixed in a horizontal or vertical position, as long as the motor is above the pump

The DAB K 30/100 M Single-Impeller Centrifugal Pump - 240v - Single Phase is a Centrifugal Pump item. This product is manufactured by Dab. Voltage for this item is 240V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB K 45/50 M is a twin-impeller centrifugal pump engineered for use in pressurisation units for water supply systems and for supplying pressurised tanks.

Appropriate also for sprinkling irrigation and other water supply applications.

Construction Features Of The Pump

Cast Iron pump body and motor support.
Technopolymer impeller.
Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Induction motor, closed and cooled with external ventilation.
Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life.
Built-in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.
Three-phase motors should be protected with a appropriate overload protection complying with the regulations in force.
Manufactured according to CEI 2-3 standards.
Motor protection: IP55, IP 44 for the models K 35/40, K 45/50, K 55/50, K 35/100, K 40/100.
Terminal box protection: IP55
Insulation class: F

- Operating range: from 1,2 to 30 m3/h with head up to 97 metres

- Liquid quality requirements: clean, free from solids or abrasive substances, non viscous,
non aggressive, non crystallized, chemically neutral, close to the characteristics of water.

- Liquid temperature range:
K 35/40, K 45/50,
K 35/100, K 40/100, K 55/100 : from -10°C to +50°C
K 55/50, K 66/100, K 90/100, K 70/300,
K 80/300, K 70/400, K 80/400 : from -15°C to +110°C

- Maximum ambient temperature: +40°C

- Maximum operating pressure:
K 35/40, K 35/100, K 40/100 : 6 Bar. (600 kPa)
K 45/50, K 55/50 : 8 Bar. (800 kPa)
K 55/100, K 66/100 : 10 Bar. (1000 kPa)
K 90/100, K 70/300, K 80/300,
K 70/400, K 80/400 : 12 Bar. (1200 kPa)

- Installation: fixed in a horizontal or vertical position, as long as the motor is above the pump.

The DAB K 45/50 M Twin-Impeller Centrifugal Pump - 240v - Single Phase is a Centrifugal Pump item. This product is manufactured by Dab. Voltage for this item is 240V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB KLP 40-600 M In-Line Circulator Pump has been engineered for the circulation of hot or cold water and is appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. This product is manufactured by Dab. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 40-600 M In-Line Circulator Pump - 240v - Single Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB KLP 40-900 M is an in-line circulator pump engineered for the circulation of hot or cold water and is appropriate for direct installation onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. This product is manufactured by Dab. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 40-900 M In-Line Circulator Pump - 240v - Single Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB KLM 50-300 M In-Line Circulator Pump has been engineered for the circulation of hot or cold water and is appropriate for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. This product is manufactured by Dab. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLM 50-300 M In-Line Circulator Pump - 240v - Single Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB KLP 50-1200 M In-Line Circulator Pump has been engineered for the circulation of hot or cold water and is appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. This product is manufactured by Dab. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 50-1200 M In-Line Circulator Pump - 240v - Single Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

THE DAB DKLP 40-1200 M Twin Head In-Line Circulator Pump ha been engineered for hot or cold water circulation requirements. This product is manufactured by Dab. Appropriate for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB DKLP 40-1200 M Twin Head In-Line Circulator Pump - 240v - Single Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

2 ESYBOX + ESYTWIN is the electronic water pressurisation set for domestic and residential environments.

The installation of 2 ESYBOX + ESYTWIN does not require any additional components. This product is manufactured by Dab. It consists of two multistage self-priming pumps with inverter electronics, pressure and flow sensors, adjustable high resolution LCD display, and 2 litre (0.5 US gal) built-in expansion vessel for each pump.

The water cooled motor, the sound-proofing ABS protection guards, the anti-vibration feet and the electronics, make this a completely silent (45 dB) and compact product.
The wireless device facilitates the creation of pressurisation sets and the connection to other DAB devices.

The kit consists of two ESYBOX and one ESYTWIN. The components are supplied disassembled.

The DAB ESYTwin Complete ESYBOX Booster Set - 240v - Single Phase - 240 Ltr/min. is a Booster Set item. Voltage for this item is 240V. It has an actual flow rate of 240 Ltr/min. The maximum head for this pump is 65m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.