Dab

The DAB Genix VT 030 V230/50 Waste Water Lifting Station - 230v - Single Phase is a Lifting Station item. This product is manufactured by Dab. Voltage for this item is 230V. The maximum head for this pump is 6m.

The DAB NOVAbox -30-300.1M Waste Water Lifting Station - 230v - Single Phase is a Lifting Station item. This product is manufactured by Dab. Voltage for this item is 230V. It has an actual flow rate of 120 Ltr/min. The maximum head for this pump is 6.09m.

Pump body, impeller, cap and suction grid in technopolymer. This product is manufactured by Dab. Motor, rotor shaft and screws in Stainless Steel. Triple O-ring seal interposed with an oil precombustion chamber. Continuous duty submersible asynchronous motor.

The DAB NOVA 600 M-A Sump Pump - 110v is a Sump Pump item. Voltage for this item is 110V. It is supplied with a 10m cable. It has an actual flow rate of 266 Ltr/min. The maximum head for this pump is 10m. It also features a Float Switch.

Pump body, impeller, cap and suction grid in technopolymer. This product is manufactured by Dab. Motor, rotor shaft and screws in Stainless Steel. Triple O-ring seal interposed with an oil precombustion chamber. Continuous duty submersible asynchronous motor.

The DAB NOVA 600 M-NA Sump Pump - Without Float - 110v - Obsolete is a Sump Pump item. Voltage for this item is 110V. It has an actual flow rate of 266 Ltr/min. The maximum head for this pump is 10m.

The DAB NOVA 180 MA Submersible Pump - 230v is a Submersible product. This product is manufactured by Dab. Voltage for this item is 230V. It is supplied with a 5m cable. It has an actual flow rate of 266 Ltr/min. The maximum head for this pump is 10m. It also features a Float Switch.

Pump body, impeller, cap and suction grid in technopolymer. This product is manufactured by Dab. Motor, rotor shaft and screws in Stainless Steel. Triple O-ring seal interposed with an oil precombustion chamber. Continuous duty submersible asynchronous motor.

The DAB NOVA 180 MNA Subermersible Pump - 230v is a Submersible product. Voltage for this item is 230V. It has an actual flow rate of 266 Ltr/min. The maximum head for this pump is 10m.

Pump body, impeller, cap and suction grid in technopolymer. This product is manufactured by Dab. Motor, rotor shaft and screws in Stainless Steel. Triple O-ring seal interposed with an oil precombustion chamber. Continuous duty submersible asynchronous motor.

The DAB NOVA 200 MNA Sump Pump - Without Float - 230v is a Sump Pump item. Voltage for this item is 230V.

Pump body, impeller, cap and suction grid in technopolymer. This product is manufactured by Dab. Motor, rotor shaft and screws in Stainless Steel. Triple O-ring seal interposed with an oil precombustion chamber. Continuous duty submersible asynchronous motor.

The DAB NOVA 300 MA Submersible Pump - 230v is a Submersible product. Voltage for this item is 230V. It is supplied with a 10m cable. It also features a Float Switch.

DAB NOVA 600MA Sump Pump - 230v

The DAB NOVA 600MA Sump Pump - 230v is a Sump Pump item. This product is manufactured by Dab. Voltage for this item is 230V. It has an actual flow rate of 266 Ltr/min. The maximum head for this pump is 10m. It also features a Float Switch.

The DAB FEKA BVP 720 M-A is a Submersible pump for draining and lifting effluent water and rainwater in residential building service. This product is manufactured by Dab. The pump is appropriate for fixed or mobile installations.

Construction Includes Of The Pump

Technopolymer pump body to avoid corrosion or oxidation, ceramic bushing and triple sealing with rings in oil bath.

Construction Features Of The Motor

Continuous duty asynchronous submersible motor with stator inserted in a hermetic Stainless Steel casing and rotor mounted on oversized ball bearings. Thermal protection incorporated in all single-phase versions.
Motor shaft in AISI 416 Stainless Steel.

The DAB FEKA BVP 750 M-A Submersible Wastewater Pump - 240v - Single Phase - 400 Ltr/min. is a Submersible product. Voltage for this item is 240V. It is supplied with a 10m cable. It has an actual flow rate of 400 Ltr/min. The maximum head for this pump is 10m. It also features a Float Switch.

Submersible pumps appropriate for pumping waste water and sewage from private and commercial dwellings and municipal sewer networks, in accordance with European standard EN 12050-1.

With full free passage Cast Iron vortex impeller with new anti-clogging profile,

Double cartridge mechanical seal as standard in SiC/SiC silicon carbide on the hydraulics side and SiC/C silicon carbide on the motor side, independent of the rotation direction. This product is manufactured by Dab. Discharge flange available in DN65, DN80, DN100 versions according to EN 1092-1.

High efficiency three-phase asynchronous motor with squirrel cage rotor, efficiency class IE3. Appropriate for use with liquids with pH between 6.5 and 12. Maximum number of starts per hour: 20. S1 motor for fully submerged continuous operation or S3 for discontinuous operation with minimum immersion levels.

Water infiltration sensor in oil chamber, capable of indicating water infiltrations through the mechanical seal (Optional). Overtemperature sensors in the motor windings with intervention threshold at 150°C.

Long-life lubricated bearings for a calculated minimum useful life of 50,000 hours. Stainless Steel motor shaft, engineered with high fatigue strength. Nominal power from 1.1 KW to 11 kW. ATEX version available for use in potentially explosive environments. Maximum installation depth: 20 metres (with cable of appropriate length). For use at liquid temperatures above +40°C.

The DAB FKV 80.15.4 T5 400D Submersible Wastewater Pump - 415v - Three Phase - 1200 Ltr/min. is a Submersible product. Voltage for this item is 400V. It has an actual flow rate of 1200 Ltr/min. The maximum head for this pump is 9.5m.

Product Applications

The vertical delivery draining submersible pump is appropriate for domestic automatically operated fixed applications, for draining basements and garages that are subject to flooding. This product is manufactured by Dab. This version is particularly suited for narrow well installation requiring automatic suction up to 2/3 mm. Thanks to its compact, easy to handle shape, it may also be applied as a portable pump for emergencies such as lifting water from tanks or rivers, emptying swimming pools, fountains, excavations, and pedestrian subways. It is also ideal for gardening, and hobby applications in general. This pump can be utilised with liquids containing solid particles of up to 10 mm in size. The electronic level selector allows fixed installation, ensuring automatic operation, and enabling the selection of the level of the liquid for automatic start. With removable filter, it is capable of suction of up to a minimum of 2/3 mm (filter removed)

Construction Includes Of The Pump

Hydro resistant technopolymer pump body, cover, and suction grid. Stainless Steel motor, roto shaft, and bolts and screws. Threefold seal with interposed rings with oil pre-chamber.

Construction Features Of The Motor

Submersible type continuous duty asynchronous motor.Stator enclosed in airtight Stainless Steel casing, with an outer cover that protects the wiring and the capacitor. Rotor running on permanently lubricatedball bearings, oversized to ensure low noise and durability. Built-in thermal-amperometric protection and permanently connected capacitor.

The DAB NOVA UP 300M-AE Submersible Pump - 240v - Single Phase - 166 Ltr/min. is a Submersible product. Voltage for this item is 240V. It has an actual flow rate of 166 Ltr/min. The maximum head for this pump is 8m.