Ebara

The Ebara - DWF M 150 Submersible Pump - Channel Impeller - Without Float - 230 V is a AISI 304 stainless steel submersible pump and single-channel impeller (DW) or vortex impeller (DW VOX) for fixed and mobile installations.

Ebara DW submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

The Ebara - CDXM 200/12 Centrifugal Pump - Single Phase - 250 Ltr/min - 230 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.

The Ebara - CDX 200/12 Centrifugal Pump - Three Phase - 250 Ltr/min - 400 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.

The Ebara - CDX 200/20 Centrifugal Pump - Three Phase - 250 Ltr/min - 400 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.

The Ebara - CDX 200/25 Centrifugal Pump - Three Phase - 250 Ltr/min - 400 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.

The Ebara - 2 CDX 200/30 Centrifugal Pump - Three Phase - 400V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - 2 CDX 200/40 Centrifugal Pump - Three Phase - 400V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - 2 CDX 200/50 Centrifugal Pump - Three Phase - 400V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

Ebara DWF submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DW submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DW VOX submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with vortex impellers.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

The Ebara - 3 M/I 40-160/4 IE3 Centrifugal End Suction Pump - Three Phase - 700 Ltr/min. - 400V is a Centrifugal pump EN733 compliant and available in different materials:
Stainless Steel AISI 304 (3 SERIES)
Stainless Steel AISI 316 (3 L SERIES)
Stainless Steel AISI 316 micro-cast for some models (3 L SERIES)
EBARA Pumps Europe perfectly understands the different needs of the sectors where the pumps will be used. This is why it has created the 3 SERIES with 2 or 4 poles motors; a complete, innovative, reliable and efficient series to operate successfully even in the most difficult and heavy-duty conditions.
The distinguishing feature of 3 SERIES is the back pull-out design: a conformation that allows the removal of the impeller-motor block without disconnecting the pump body from the piping, thus allowing any type of maintenance.
The selection consists of the:
Monobloc 3(L)M SERIES
With rigid coupling 3(L)S SERIES
With elastic coupling 3(L)P SERIES
For the 3 LM SERIES and 3 LS SERIES the Z version is available, with the casing body without the support foot and with a new foot directly mounted to the motor bracket.
This solution allows the pump to stay in limited spaces where it is not possible to connect the foot of the standard 3 SERIES and, most importantly, allows to connect the pump in different positions thanks to the 90° rotation of the foot.
The 3(L)S SERIES and 3(L)P SERIES are offered with ATEX certified hydraulics and motor (we suggest contacting the sales network for the ATEX version).
For further technical information see the datasheet

Suitability:

• Heating, ventilation and air-conditioning systems
• Water supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation
• Cooling towers
• Swimming pools
• Drainage
• Washing systems

The Ebara - 3 M/I 40-200/7,5 IE3 Centrifugal End Suction Pump - Three Phase - 700 Ltr/min. - 400V is a Centrifugal pump EN733 compliant and available in different materials:
Stainless Steel AISI 304 (3 SERIES)
Stainless Steel AISI 316 (3 L SERIES)
Stainless Steel AISI 316 micro-cast for some models (3 L SERIES)
EBARA Pumps Europe perfectly understands the different needs of the sectors where the pumps will be used. This is why it has created the 3 SERIES with 2 or 4 poles motors; a complete, innovative, reliable and efficient series to operate successfully even in the most difficult and heavy-duty conditions.
The distinguishing feature of 3 SERIES is the back pull-out design: a conformation that allows the removal of the impeller-motor block without disconnecting the pump body from the piping, thus allowing any type of maintenance.
The selection consists of the:
Monobloc 3(L)M SERIES
With rigid coupling 3(L)S SERIES
With elastic coupling 3(L)P SERIES
For the 3 LM SERIES and 3 LS SERIES the Z version is available, with the casing body without the support foot and with a new foot directly mounted to the motor bracket.
This solution allows the pump to stay in limited spaces where it is not possible to connect the foot of the standard 3 SERIES and, most importantly, allows to connect the pump in different positions thanks to the 90° rotation of the foot.
The 3(L)S SERIES and 3(L)P SERIES are offered with ATEX certified hydraulics and motor (we suggest contacting the sales network for the ATEX version).
For further technical information see the datasheet

Suitability:

• Heating, ventilation and air-conditioning systems
• Water supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation
• Cooling towers
• Swimming pools
• Drainage
• Washing systems

The Ebara - 3 D/I 40-160/4.0 Centrifugal Pump - Three Phase - 700 Ltr/min. - 400V is a Standardised Cast Iron centrifugal pump with AISI 304 and AISI 316 steel impeller, axial suction and radial discharge with 2 or 4 poles motors. The 3 D SERIES is equipped with Back pull-out design that allows the motor, coupling, bracket and impeller to be removed without compromising the pump body or disassembling the piping.
The many types of mechanical seal that can be mounted on the electric pumps allow the use of special materials. Therefore, they can adapt to different needs based, for example, on the type of liquid, temperature or other factors of use, covering, depending on the model, a wide selection of temperatures.
The 3 D SERIES is divided into three versions:
3 D SERIES monoblock with extended shaft
3 DS SERIES with rigid coupling and IEC Standard motor
3 DP SERIES with elastic coupling and IEC Standard motor
For further technical information see the datasheet

Suitability:

• Heating, ventilation and air-conditioning systems
• liquid supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation for farms, sports facilities
• Washing systems

The Ebara - MATRIX/I10-4 T/1,5 IE3 Horizontal Multistage Pump - Three Phase - 250 Ltr/min - 400 V is a Multistage horizontal AISI 304 stainless steel centrifugal pump, ideal for drinking water. Its sturdy construction, and compact design allow its setup in various domestic and industrial applications.