Ebara

The Ebara - CDXM 200/12 Centrifugal Pump - Single Phase - 250 Ltr/min - 230 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.

The Ebara - CDX 200/12 Centrifugal Pump - Three Phase - 250 Ltr/min - 400 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.

The Ebara - CDX 200/20 Centrifugal Pump - Three Phase - 250 Ltr/min - 400 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.

The Ebara - CDX 200/25 Centrifugal Pump - Three Phase - 250 Ltr/min - 400 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.

The Ebara - 2 CDX 200/30 Centrifugal Pump - Three Phase - 400V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - 2 CDX 200/40 Centrifugal Pump - Three Phase - 400V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - 2 CDX 200/50 Centrifugal Pump - Three Phase - 400V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

Ebara DWF submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DW submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

The Ebara - MATRIX/I10-4 T/1,5 IE3 Horizontal Multistage Pump - Three Phase - 250 Ltr/min - 400 V is a Multistage horizontal AISI 304 stainless steel centrifugal pump, ideal for drinking water. Its sturdy construction, and compact design allow its setup in various domestic and industrial applications.

The Ebara - MATRIX/I10-6 T/2,2 IE3 Horizontal Multistage Pump - Three Phase - 250 Ltr/min - 400 V is a Multistage horizontal AISI 304 stainless steel centrifugal pump, ideal for drinking water. Its sturdy construction, and compact design allow its setup in various domestic and industrial applications.

The Ebara - RIGHT/A 75 M A 10 MT SPINA UK Sewage Pump - Single Phase - 240 Ltr/min - 230 V is a Submersible pump entirely in AISI 304 stainless steel and open vortex impeller, which can be utilised in fixed and mobile installations. The RIGHT electric pump is also available with a float switch that allows for wide use.

The Ebara - CDXL/I 200/12 IE3 Single Stage Centrifugal Pump - Three Phase - 250 Ltr/min - 400 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.

The Ebara - CDXL/I 200/20 IE3 Single Stage Centrifugal Pump - Three Phase - 250 Ltr/min - 400 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.

The Ebara - CDXL/I 200/25 IE3 Single Stage Centrifugal Pump - Three Phase - 250 Ltr/min - 400 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.

The Ebara CD are surface centrifugal electric pumps entirely made of AISI 304 Stainless Steel.
CD model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general.
The standard mechanical seal is made of Ceramic/Carbon/NBR, but several special seals are available.

PUMP TECHNICAL DATA
• Liquid temperature:
-5°C ÷ +60°C (from -15°C to +110°C for H,
HS, HW and HSW versions)
• Total head from 36.8 to 12.5 m
• Flow rate 1.2 to 15 m3/h
• Hydraulic efficiency index MEI > 0.4
• IE3 high efficiency motors starting from 0.75kW