Ebara

The Ebara - 3 M 50-125/2,2 M Centrifugal End Suction Pump - Single Phase - 1000 Ltr/min. - 230V is a Centrifugal pump EN733 compliant and available in different materials:
Stainless Steel AISI 304 (3 SERIES)
Stainless Steel AISI 316 (3 L SERIES)
Stainless Steel AISI 316 micro-cast for some models (3 L SERIES)
EBARA Pumps Europe perfectly understands the different needs of the sectors where the pumps will be used. This is why it has created the 3 SERIES with 2 or 4 poles motors; a complete, innovative, reliable and efficient series to operate successfully even in the most difficult and heavy-duty conditions.
The distinguishing feature of 3 SERIES is the back pull-out design: a conformation that allows the removal of the impeller-motor block without disconnecting the pump body from the piping, thus allowing any type of maintenance.
The selection consists of the:
Monobloc 3(L)M SERIES
With rigid coupling 3(L)S SERIES
With elastic coupling 3(L)P SERIES
For the 3 LM SERIES and 3 LS SERIES the Z version is available, with the casing body without the support foot and with a new foot directly mounted to the motor bracket.
This solution allows the pump to stay in limited spaces where it is not possible to connect the foot of the standard 3 SERIES and, most importantly, allows to connect the pump in different positions thanks to the 90° rotation of the foot.
The 3(L)S SERIES and 3(L)P SERIES are offered with ATEX certified hydraulics and motor (we suggest contacting the sales network for the ATEX version).
For further technical information see the datasheet

Suitability:

• Heating, ventilation and air-conditioning systems
• Water supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation
• Cooling towers
• Swimming pools
• Drainage
• Washing systems

The Ebara - 3 M/I 50-125/2,2 IE3 Centrifugal End Suction Pump - Three Phase - 1000 Ltr/min. - 400V is a Centrifugal pump EN733 compliant and available in different materials:
Stainless Steel AISI 304 (3 SERIES)
Stainless Steel AISI 316 (3 L SERIES)
Stainless Steel AISI 316 micro-cast for some models (3 L SERIES)
EBARA Pumps Europe perfectly understands the different needs of the sectors where the pumps will be used. This is why it has created the 3 SERIES with 2 or 4 poles motors; a complete, innovative, reliable and efficient series to operate successfully even in the most difficult and heavy-duty conditions.
The distinguishing feature of 3 SERIES is the back pull-out design: a conformation that allows the removal of the impeller-motor block without disconnecting the pump body from the piping, thus allowing any type of maintenance.
The selection consists of the:
Monobloc 3(L)M SERIES
With rigid coupling 3(L)S SERIES
With elastic coupling 3(L)P SERIES
For the 3 LM SERIES and 3 LS SERIES the Z version is available, with the casing body without the support foot and with a new foot directly mounted to the motor bracket.
This solution allows the pump to stay in limited spaces where it is not possible to connect the foot of the standard 3 SERIES and, most importantly, allows to connect the pump in different positions thanks to the 90° rotation of the foot.
The 3(L)S SERIES and 3(L)P SERIES are offered with ATEX certified hydraulics and motor (we suggest contacting the sales network for the ATEX version).
For further technical information see the datasheet

Suitability:

• Heating, ventilation and air-conditioning systems
• Water supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation
• Cooling towers
• Swimming pools
• Drainage
• Washing systems

The Ebara - 3 D 50-125/2,2 M Centrifugal Pump - Single Phase - 1000 Ltr/min. - 230V is a Standardised Cast Iron centrifugal pump with AISI 304 and AISI 316 steel impeller, axial suction and radial discharge with 2 or 4 poles motors. The 3 D SERIES is equipped with Back pull-out design that allows the motor, coupling, bracket and impeller to be removed without compromising the pump body or disassembling the piping.
The many types of mechanical seal that can be mounted on the electric pumps allow the use of special materials. Therefore, they can adapt to different needs based, for example, on the type of liquid, temperature or other factors of use, covering, depending on the model, a wide selection of temperatures.
The 3 D SERIES is divided into three versions:
3 D SERIES monoblock with extended shaft
3 DS SERIES with rigid coupling and IEC Standard motor
3 DP SERIES with elastic coupling and IEC Standard motor
For further technical information see the datasheet

Suitability:

• Heating, ventilation and air-conditioning systems
• liquid supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation for farms, sports facilities
• Washing systems

The Ebara - 3 D/I 50-125/2.2 Centrifugal Pump - Three Phase - 1000 Ltr/min. - 400V is a Standardised Cast Iron centrifugal pump with AISI 304 and AISI 316 steel impeller, axial suction and radial discharge with 2 or 4 poles motors. The 3 D SERIES is equipped with Back pull-out design that allows the motor, coupling, bracket and impeller to be removed without compromising the pump body or disassembling the piping.
The many types of mechanical seal that can be mounted on the electric pumps allow the use of special materials. Therefore, they can adapt to different needs based, for example, on the type of liquid, temperature or other factors of use, covering, depending on the model, a wide selection of temperatures.
The 3 D SERIES is divided into three versions:
3 D SERIES monoblock with extended shaft
3 DS SERIES with rigid coupling and IEC Standard motor
3 DP SERIES with elastic coupling and IEC Standard motor
For further technical information see the datasheet

Suitability:

• Heating, ventilation and air-conditioning systems
• liquid supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation for farms, sports facilities
• Washing systems

The Ebara - GS 40-125 -142/B1 Bareshaft End Suction Pump - Motorless - Cast Iron Impeller is a Standardised single-stage cast iron centrifugal pump and electric pump which combines the best technical and performance features in a single solution.

The Ebara - GS 40-160 -134/A1 Bareshaft End Suction Pump - Motorless - Bronze Impeller is a Standardised single-stage cast iron centrifugal pump and electric pump which combines the best technical and performance features in a single solution.

The Ebara - GS 40-200 -205/B1 Bareshaft End Suction Pump - Motorless - Cast Iron Impeller is a Standardised single-stage cast iron centrifugal pump and electric pump which combines the best technical and performance features in a single solution.

The Ebara - GS 50-200 -188/B1 Bareshaft End Suction Pump - Motorless - Cast Iron Impeller is a Standardised single-stage cast iron centrifugal pump and electric pump which combines the best technical and performance features in a single solution.

The Ebara - GS 50-250 -238/B1 Bareshaft End Suction Pump - Motorless - Cast Iron Impeller is a Standardised single-stage cast iron centrifugal pump and electric pump which combines the best technical and performance features in a single solution.

The Ebara - GS 50-315 -277/B1 Bareshaft End Suction Pump - Motorless - Cast Iron Impeller is a Standardised single-stage cast iron centrifugal pump and electric pump which combines the best technical and performance features in a single solution.

The Ebara - GS 65-125 -120/A1 Bareshaft End Suction Pump - Motorless - Bronze Impeller is a Standardised single-stage cast iron centrifugal pump and electric pump which combines the best technical and performance features in a single solution.

The Ebara - GS 65-125 -139/A1 Bareshaft End Suction Pump - Motorless - Bronze Impeller is a Standardised single-stage cast iron centrifugal pump and electric pump which combines the best technical and performance features in a single solution.

The Ebara - GS 65-200 -162/B1 Bareshaft End Suction Pump - Motorless - Cast Iron Impeller is a Standardised single-stage cast iron centrifugal pump and electric pump which combines the best technical and performance features in a single solution.