Ebara

The Ebara - Best 2 MA Submersible Pump - With Float Switch - 230V is a Submersible pump entirely in AISI 304 Stainless Steel, with double mechanical seal in oil chamber.
Practical and easy to use, BEST 2-5 electric pumps are also offered with float, thus increasing their Versatility, of use.
For further technical information see the datasheet

Suitability:

• Handling of seepage liquid
• Emptying of basements, garages, cellars
• Drainage of small and medium-sized construction, sites

Ebara Best submersible pumps are suitable for draining wells, garages, cellars or places subject to flooding, feeding of garden fountains, easy emptying of tubs and tanks.

â–ºMaximum liquid temperature: 50°C
â–ºMaximum immersion depth: 10 Metres
â–ºMaximum soft solids: 10 mm
â–ºOutlet: 1-1/2" B.S.P.

Female
â–ºPower cable: 10 Metres
â–º230V pumps are fitted with UK 3 pin plug

• Handling of seepage liquid
• Emptying of basements, garages, cellars
• Drainage of small and medium-sized construction, sites

The Ebara - DWF M 100 A Submersible Pump - With Channel Impeller - With Float Switch - 230 V is a AISI 304 stainless steel submersible pump and single-channel impeller (DW) or vortex impeller (DW VOX) for fixed and mobile installations.

Ebara DWF submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DW submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DW submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DWF submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DW VOX submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with vortex impellers.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

The Ebara - 3 M/I 32-200/5,5 IE3 Centrifugal End Suction Pump - Three Phase - 300 Ltr/min. - 400V is a Centrifugal pump EN733 compliant and available in different materials:
Stainless Steel AISI 304 (3 SERIES)
Stainless Steel AISI 316 (3 L SERIES)
Stainless Steel AISI 316 micro-cast for some models (3 L SERIES)
EBARA Pumps Europe perfectly understands the different needs of the sectors where the pumps will be used. This is why it has created the 3 SERIES with 2 or 4 poles motors; a complete, innovative, reliable and efficient series to operate successfully even in the most difficult and heavy-duty conditions.
The distinguishing feature of 3 SERIES is the back pull-out design: a conformation that allows the removal of the impeller-motor block without disconnecting the pump body from the piping, thus allowing any type of maintenance.
The selection consists of the:
Monobloc 3(L)M SERIES
With rigid coupling 3(L)S SERIES
With elastic coupling 3(L)P SERIES
For the 3 LM SERIES and 3 LS SERIES the Z version is available, with the casing body without the support foot and with a new foot directly mounted to the motor bracket.
This solution allows the pump to stay in limited spaces where it is not possible to connect the foot of the standard 3 SERIES and, most importantly, allows to connect the pump in different positions thanks to the 90° rotation of the foot.
The 3(L)S SERIES and 3(L)P SERIES are offered with ATEX certified hydraulics and motor (we suggest contacting the sales network for the ATEX version).
For further technical information see the datasheet

Suitability:

• Heating, ventilation and air-conditioning systems
• Water supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation
• Cooling towers
• Swimming pools
• Drainage
• Washing systems

The Ebara - RIGHT/A 100 M A 10 MT SPINA UK Sewage Pump - Single Phase - 300 Ltr/min - 230 V is a Submersible pump entirely in AISI 304 stainless steel and open vortex impeller, which can be utilised in fixed and mobile installations. The RIGHT electric pump is also available with a float switch that allows for wide use.

The Ebara - DW VOX/A M 150 SPINA UK Submersible Sewage Pump - Single Phase - Manual - 230 V is a AISI 304 stainless steel submersible pump and single-channel impeller (DW) or vortex impeller (DW VOX) for fixed and mobile installations.

The Ebara - DW VOX/A M 150 A SPINA UK Submersible Sewage Pump - Single Phase - With Floatswitch - 230 V is a AISI 304 stainless steel submersible pump and single-channel impeller (DW) or vortex impeller (DW VOX) for fixed and mobile installations.

The Ebara - CMB/A 2.00 M Centrifugal Pump - Single Phase - 280 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMB/I 1.50 T IE3 Centrifugal Pump - Three Phase - 280 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMB/I 2.00 T IE3 Centrifugal Pump - Three Phase - 280 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMB/I 3.00 T IE3 Centrifugal Pump - Three Phase - 280 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).