-
1150050002E
Ebara - PRA 0.50M Peripheral Pump - 230VEbara PRA is a compact peripheral pump range with cast-iron pump body and motor bracket, also available in nickel-plated versions (model dependent).
Peripheral (turbine) hydraulics are typically used where relatively higher head is needed at lower flows for domestic-type services (duty dependent).
In stock
Free Standard Delivery
EB-115 005 0004
Ebara - PRA 0.50T Three Phase Peripheral Pump - 400VThe Ebara - PRA 0.50 T Three Phase Peripheral Pump - 400 V is a PRA peripheral pump with cast iron body and support, also offered in the nickel-plated version (PRN 0.50 single-phase). PRA-PRN electric pumps are practical, streamlined and easily transportable.
In stock
Free Standard Delivery
EB-115 008 0000
Ebara - PRA 0.80M Peripheral Pump - 230VThe Ebara - PRA 0.80 M Peripheral Pump - 230 V is a PRA peripheral pump with cast iron body and support, also offered in the nickel-plated version (PRN 0.50 single-phase). PRA-PRN electric pumps are practical, streamlined and easily transportable.
In stock
Free Standard Delivery
EB-115 008 0004
Ebara - PRA 0.80T Three Phase Peripheral Pump - 400VThe Ebara - PRA 0.80 T Three Phase Peripheral Pump - 400 V is a PRA peripheral pump with cast iron body and support, also offered in the nickel-plated version (PRN 0.50 single-phase). PRA-PRN electric pumps are practical, streamlined and easily transportable.
In stock
Free Standard Delivery
EB-115 010 0000
Ebara - PRA 1.00M Peripheral Pump - 230VThe Ebara - PRA 1.00 M Peripheral Pump - 230 V is a PRA peripheral pump with cast iron body and support, also offered in the nickel-plated version (PRN 0.50 single-phase). PRA-PRN electric pumps are practical, streamlined and easily transportable.
In stock
Free Standard Delivery
EB-115 010 0004
Ebara - PRA 1.00T Three Phase Peripheral Pump - 400VThe Ebara - PRA 1.00 T Three Phase Peripheral Pump - 400 V is a PRA peripheral pump with cast iron body and support, also offered in the nickel-plated version (PRN 0.50 single-phase). PRA-PRN electric pumps are practical, streamlined and easily transportable.
In stock
Free Standard Delivery
1690050000
Ebara - JESX M5 Centrifugal Pump - Single Phase - 45 Ltr/min - 230VThe Ebara - JESX M5 Centrifugal Pump - Single Phase - 45 Ltr/min - 230 V is a Self-priming surface pump in AISI 304 stainless steel. The small size and lightness of the structure make it suitable for the domestic sector.
In stock
Free Standard Delivery
1690060000
Ebara - JESX M6 Centrifugal Pump - Single Phase - 45 Ltr/min - 230VThe Ebara - JESX M6 Centrifugal Pump - Single Phase - 45 Ltr/min - 230 V is a Self-priming surface pump in AISI 304 stainless steel. The small size and lightness of the structure make it suitable for the domestic sector.
In stock
Free Standard Delivery
1690080000
Ebara - JESX M8 Centrifugal Pump - Single Phase - 45 Ltr/min - 230VThe Ebara - JESX M8 Centrifugal Pump - Single Phase - 45 Ltr/min - 230 V is a Self-priming surface pump in AISI 304 stainless steel. The small size and lightness of the structure make it suitable for the domestic sector.
In stock
Free Standard Delivery
1690050004
Ebara - JESX 5 Centrifugal Pump - Three Phase - 45 Ltr/min - 400VThe Ebara - JESX 5 Centrifugal Pump - Three Phase - 45 Ltr/min - 400 V is a Self-priming surface pump in AISI 304 stainless steel. The small size and lightness of the structure make it suitable for the domestic sector.
In stock
Free Standard Delivery
1700050000
Ebara - JES M5 Centrifugal Pump - Single Phase - 45 Ltr/min - 230VThe electric pumps of the Ebara JES - JE series are electric pumps in AISI 304 Stainless Steel.
These are self-priming pumps equipped with Venturi group (ejector and diffuser), which are easy to use and light thanks to their small size.
Constructively they have the pump body, the support, the seal bearing disc in AISI 304 steel.
They are equipped with an AISI 303 shaft (for the part in contact with the liquid).
The impellers are different depending on the model: for the JES electric pumps the impeller is in
The Ebara - JES M5 Centrifugal Pump - Single Phase - 45 Ltr/min. - 230V is a Self-priming centrifugal pump in AISI 304 steel with a special hydraulic system including a Venturi unit (ejector and diffuser) that can suck liquid up to 8 metres deep.
PPO + PS reinforced with glass fibres, while for the JE the impeller is in AISI 304.
ideal for residential applications: gardening and irrigation.
Lightweight and easily transportable, small in size.
For further technical information see the datasheet
Suitability:- Domestic pressurisation
- Pressure boosting in general
- Garden irrigation systems
- Vehicle washing
- Handling of clean water
In stock
Free Standard Delivery
1700060000
Ebara - JES M6 Centrifugal Pump - Single Phase - 45 Ltr/min - 230VThe electric pumps of the Ebara JES - JE series are electric pumps in AISI 304 Stainless Steel.
These are self-priming pumps equipped with Venturi group (ejector and diffuser), which are easy to use and light thanks to their small size.
Constructively they have the pump body, the support, the seal bearing disc in AISI 304 steel.
They are equipped with an AISI 303 shaft (for the part in contact with the liquid).
The impellers are different depending on the model: for the JES electric pumps the impeller is in
The Ebara - JES M6 Centrifugal Pump - Single Phase - 45 Ltr/min. - 230V is a Self-priming centrifugal pump in AISI 304 steel with a special hydraulic system including a Venturi unit (ejector and diffuser) that can suck liquid up to 8 metres deep.
PPO + PS reinforced with glass fibres, while for the JE the impeller is in AISI 304.
ideal for residential applications: gardening and irrigation.
Lightweight and easily transportable, small in size.
For further technical information see the datasheet
Suitability:- Domestic pressurisation
- Pressure boosting in general
- Garden irrigation systems
- Vehicle washing
- Handling of clean water
In stock
Free Standard Delivery
1700080000
Ebara - JES M8 Centrifugal Pump - Single Phase - 45 Ltr/min - 230VThe electric pumps of the Ebara JES - JE series are electric pumps in AISI 304 Stainless Steel.
These are self-priming pumps equipped with Venturi group (ejector and diffuser), which are easy to use and light thanks to their small size.
Constructively they have the pump body, the support, the seal bearing disc in AISI 304 steel.
They are equipped with an AISI 303 shaft (for the part in contact with the liquid).
The impellers are different depending on the model: for the JES electric pumps the impeller is in
The Ebara - JES M8 Centrifugal Pump - Single Phase - 45 Ltr/min. - 230V is a Self-priming centrifugal pump in AISI 304 steel with a special hydraulic system including a Venturi unit (ejector and diffuser) that can suck liquid up to 8 metres deep.
PPO + PS reinforced with glass fibres, while for the JE the impeller is in AISI 304.
ideal for residential applications: gardening and irrigation.
Lightweight and easily transportable, small in size.
For further technical information see the datasheet
Suitability:- Domestic pressurisation
- Pressure boosting in general
- Garden irrigation systems
- Vehicle washing
- Handling of clean water
In stock
Free Standard Delivery
1700050004
Ebara - JES 5 Centrifugal Pump - Three Phase - 45 Ltr/min - 400VThe electric pumps of the Ebara JES - JE series are electric pumps in AISI 304 Stainless Steel.
These are self-priming pumps equipped with Venturi group (ejector and diffuser), which are easy to use and light thanks to their small size.
Constructively they have the pump body, the support, the seal bearing disc in AISI 304 steel.
They are equipped with an AISI 303 shaft (for the part in contact with the liquid).
The impellers are different depending on the model: for the JES electric pumps the impeller is in
The Ebara - JES 5 Centrifugal Pump - Three Phase - 45 Ltr/min. - 400V is a Self-priming centrifugal pump in AISI 304 steel with a special hydraulic system including a Venturi unit (ejector and diffuser) that can suck liquid up to 8 metres deep.
PPO + PS reinforced with glass fibres, while for the JE the impeller is in AISI 304.
ideal for residential applications: gardening and irrigation.
Lightweight and easily transportable, small in size.
For further technical information see the datasheet
Suitability:- Domestic pressurisation
- Pressure boosting in general
- Garden irrigation systems
- Vehicle washing
- Handling of clean water
In stock
Free Standard Delivery
1700060004
Ebara - JES 6 Centrifugal Pump - Three Phase - 45 Ltr/min - 400VThe electric pumps of the Ebara JES - JE series are electric pumps in AISI 304 Stainless Steel.
These are self-priming pumps equipped with Venturi group (ejector and diffuser), which are easy to use and light thanks to their small size.
Constructively they have the pump body, the support, the seal bearing disc in AISI 304 steel.
They are equipped with an AISI 303 shaft (for the part in contact with the liquid).
The impellers are different depending on the model: for the JES electric pumps the impeller is in
The Ebara - JES 6 Centrifugal Pump - Three Phase - 45 Ltr/min. - 400V is a Self-priming centrifugal pump in AISI 304 steel with a special hydraulic system including a Venturi unit (ejector and diffuser) that can suck liquid up to 8 metres deep.
PPO + PS reinforced with glass fibres, while for the JE the impeller is in AISI 304.
ideal for residential applications: gardening and irrigation.
Lightweight and easily transportable, small in size.
For further technical information see the datasheet
Suitability:- Domestic pressurisation
- Pressure boosting in general
- Garden irrigation systems
- Vehicle washing
- Handling of clean water
In stock
Free Standard Delivery
1700080004
Ebara - JES 8 Centrifugal Pump - Three Phase - 45 Ltr/min - 400VThe electric pumps of the Ebara JES - JE series are electric pumps in AISI 304 Stainless Steel.
These are self-priming pumps equipped with Venturi group (ejector and diffuser), which are easy to use and light thanks to their small size.
Constructively they have the pump body, the support, the seal bearing disc in AISI 304 steel.
They are equipped with an AISI 303 shaft (for the part in contact with the liquid).
The impellers are different depending on the model: for the JES electric pumps the impeller is in
The Ebara - JES 8 Centrifugal Pump - Three Phase - 45 Ltr/min. - 400V is a Self-priming centrifugal pump in AISI 304 steel with a special hydraulic system including a Venturi unit (ejector and diffuser) that can suck liquid up to 8 metres deep.
PPO + PS reinforced with glass fibres, while for the JE the impeller is in AISI 304.
ideal for residential applications: gardening and irrigation.
Lightweight and easily transportable, small in size.
For further technical information see the datasheet
Suitability:- Domestic pressurisation
- Pressure boosting in general
- Garden irrigation systems
- Vehicle washing
- Handling of clean water
In stock
Free Standard Delivery















