Ebara

The Ebara - 2 CDXM 70/15 Centrifugal Pump - Single Phase - 230V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - 2 CDXM 70/20 Centrifugal End Suction Pump - Single Phase - 230V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - 2 CDXM 120/15 Centrifugal Pump - Single Phase - 230V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - 2 CDXM 120/20 Centrifugal Pump - Single Phase - 230V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - PRA 0.50 T Three Phase Peripheral Pump - 400 V is a PRA peripheral pump with cast iron body and support, also offered in the nickel-plated version (PRN 0.50 single-phase). PRA-PRN electric pumps are practical, streamlined and easily transportable.

The Ebara - PRA 0.80 M Peripheral Pump - 230 V is a PRA peripheral pump with cast iron body and support, also offered in the nickel-plated version (PRN 0.50 single-phase). PRA-PRN electric pumps are practical, streamlined and easily transportable.

The Ebara - PRA 0.80 T Three Phase Peripheral Pump - 400 V is a PRA peripheral pump with cast iron body and support, also offered in the nickel-plated version (PRN 0.50 single-phase). PRA-PRN electric pumps are practical, streamlined and easily transportable.

The Ebara - PRA 1.00 M Peripheral Pump - 230 V is a PRA peripheral pump with cast iron body and support, also offered in the nickel-plated version (PRN 0.50 single-phase). PRA-PRN electric pumps are practical, streamlined and easily transportable.

The Ebara - PRA 1.00 T Three Phase Peripheral Pump - 400 V is a PRA peripheral pump with cast iron body and support, also offered in the nickel-plated version (PRN 0.50 single-phase). PRA-PRN electric pumps are practical, streamlined and easily transportable.

The Ebara - PRA 1.50 M Peripheral Pump - 230 V is a PRA peripheral pump with cast iron body and support, also offered in the nickel-plated version (PRN 0.50 single-phase). PRA-PRN electric pumps are practical, streamlined and easily transportable.

The Ebara - PRA 2.00 M Peripheral Pump - 230 V is a PRA peripheral pump with cast iron body and support, also offered in the nickel-plated version (PRN 0.50 single-phase). PRA-PRN electric pumps are practical, streamlined and easily transportable.

The Ebara - PRA 2.00 T Three Phase Peripheral Pump - 400 V is a PRA peripheral pump with cast iron body and support, also offered in the nickel-plated version (PRN 0.50 single-phase). PRA-PRN electric pumps are practical, streamlined and easily transportable.

The Ebara - IDROGO M 40/06 Manual Submersible Pump - without Float Switch - 80 Ltr/min - 230 V is a 5" submerged pump with stainless steel outer casing and glass fibre reinforced PPE impellers. The IDROGO electric pump is reliable and corrosion-resistant, also due to the technical solutions adopted in its construction, , such as the double mechanical seal in the oil chamber.

The Ebara - IDROGO M 40/08 Manual Subermersible Pump - without Float Switch - 230 V is a 5" submerged pump with stainless steel outer casing and glass fibre reinforced PPE impellers. The IDROGO electric pump is reliable and corrosion-resistant, also due to the technical solutions adopted in its construction, , such as the double mechanical seal in the oil chamber.

The Ebara - IDROGO M 80/15 Manual Submersible Pump - Without Float Switch - 230 V is a 5" submerged pump with stainless steel outer casing and glass fibre reinforced PPE impellers. The IDROGO electric pump is reliable and corrosion-resistant, also due to the technical solutions adopted in its construction, , such as the double mechanical seal in the oil chamber.