Ebara

Ebara CD are surface centrifugal electric pumps entirely made of AISI 304 Stainless Steel.
CD model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general.
The standard mechanical seal is made of Ceramic/Carbon/NBR, but several special seals are available.

PUMP TECHNICAL DATA
• Liquid temperature:
-5°C ÷ +60°C (from -15°C to +110°C for H,
HS, HW and HSW versions)
• Total head from 36.8 to 12.5 m
• Flow rate 1.2 to 15 m3/h
• Hydraulic efficiency index MEI > 0.4
• IE3 high efficiency motors starting from 0.75kW

The Ebara CD are surface centrifugal electric pumps entirely made of AISI 304 Stainless Steel.
CD model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general.
The standard mechanical seal is made of Ceramic/Carbon/NBR, but several special seals are available.

PUMP TECHNICAL DATA
• Liquid temperature:
-5°C ÷ +60°C (from -15°C to +110°C for H,
HS, HW and HSW versions)
• Total head from 36.8 to 12.5 m
• Flow rate 1.2 to 15 m3/h
• Hydraulic efficiency index MEI > 0.4
• IE3 high efficiency motors starting from 0.75kW

The Ebara CD are surface centrifugal electric pumps entirely made of AISI 304 Stainless Steel.
CD model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general.
The standard mechanical seal is made of Ceramic/Carbon/NBR, but several special seals are available.

PUMP TECHNICAL DATA
• Liquid temperature:
-5°C ÷ +60°C (from -15°C to +110°C for H,
HS, HW and HSW versions)
• Total head from 36.8 to 12.5 m
• Flow rate 1.2 to 15 m3/h
• Hydraulic efficiency index MEI > 0.4
• IE3 high efficiency motors starting from 0.75kW

The Ebara - 2 CDXM/C 70/15 Centrifugal Pump - Single Phase - 80 Ltr/min. - 230V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - CMA 0.50 M Centrifugal Pump - - Single Phase - 90 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA 0.50 M (Brass Impeller) Centrifugal Pump - Single Phase - 90 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA/A 0.75 M Centrifugal Pump - Single Phase - 85 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA 0.75 M (Brass Impeller) Centrifugal Pump - Single Phase - 85 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA 1.00 M Centrifugal Pump - - Single Phase - 95 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA 1.00 M (Brass Impeller) Centrifugal Pump - Single Phase - 95 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA/B 1.50 M Centrifugal Pump - Single Phase - 110 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA/A 2.00 M Centrifugal Pump - Single Phase - 120 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMB 0.75 M Centrifugal Pump - Single Phase - 250 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMB 1.00 M Centrifugal Pump - Single Phase - 250 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMB/A 2.00 M Centrifugal Pump - Single Phase - 280 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMC 0.75 M Centrifugal Pump - Single Phase - 400 Ltr/min - 230 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).