Ebara

The Ebara - 3 D/I 32-160/2.2 Centrifugal Pump - Three Phase - 333 Ltr/min. - 400V is a Standardised Cast Iron centrifugal pump with AISI 304 and AISI 316 steel impeller, axial suction and radial discharge with 2 or 4 poles motors. The 3 D SERIES is equipped with Back pull-out design that allows the motor, coupling, bracket and impeller to be removed without compromising the pump body or disassembling the piping.
The many types of mechanical seal that can be mounted on the electric pumps allow the use of special materials. Therefore, they can adapt to different needs based, for example, on the type of liquid, temperature or other factors of use, covering, depending on the model, a wide selection of temperatures.
The 3 D SERIES is divided into three versions:
3 D SERIES monoblock with extended shaft
3 DS SERIES with rigid coupling and IEC Standard motor
3 DP SERIES with elastic coupling and IEC Standard motor
For further technical information see the datasheet

Suitability:

• Heating, ventilation and air-conditioning systems
• liquid supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation for farms, sports facilities
• Washing systems

The Ebara - 3 D/I 40-160/4.0 Centrifugal Pump - Three Phase - 700 Ltr/min. - 400V is a Standardised Cast Iron centrifugal pump with AISI 304 and AISI 316 steel impeller, axial suction and radial discharge with 2 or 4 poles motors. The 3 D SERIES is equipped with Back pull-out design that allows the motor, coupling, bracket and impeller to be removed without compromising the pump body or disassembling the piping.
The many types of mechanical seal that can be mounted on the electric pumps allow the use of special materials. Therefore, they can adapt to different needs based, for example, on the type of liquid, temperature or other factors of use, covering, depending on the model, a wide selection of temperatures.
The 3 D SERIES is divided into three versions:
3 D SERIES monoblock with extended shaft
3 DS SERIES with rigid coupling and IEC Standard motor
3 DP SERIES with elastic coupling and IEC Standard motor
For further technical information see the datasheet

Suitability:

• Heating, ventilation and air-conditioning systems
• liquid supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation for farms, sports facilities
• Washing systems

The Ebara - 3 D/I 50-160/7.5 IE3 Centrifugal Pump - Three Phase - 1200 Ltr/min. - 400V is a Standardised Cast Iron centrifugal pump with AISI 304 and AISI 316 steel impeller, axial suction and radial discharge with 2 or 4 poles motors. The 3 D SERIES is equipped with Back pull-out design that allows the motor, coupling, bracket and impeller to be removed without compromising the pump body or disassembling the piping.
The many types of mechanical seal that can be mounted on the electric pumps allow the use of special materials. Therefore, they can adapt to different needs based, for example, on the type of liquid, temperature or other factors of use, covering, depending on the model, a wide selection of temperatures.
The 3 D SERIES is divided into three versions:
3 D SERIES monoblock with extended shaft
3 DS SERIES with rigid coupling and IEC Standard motor
3 DP SERIES with elastic coupling and IEC Standard motor
For further technical information see the datasheet

Suitability:

• Heating, ventilation and air-conditioning systems
• liquid supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation for farms, sports facilities
• Washing systems

The Ebara - CMA 0.50 T Centrifugal Pump - Three Phase - 90 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA 0.50 T (BRASS IMPELLER) Centrifugal Pump - Three Phase - 90 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA 0.75 T (BRASS IMPELLER) Centrifugal Pump - Three Phase - 85 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA/I 1.00 T IE3 Centrifugal Pump - Three Phase - 95 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA/I 1.00 T Brass Impeller IE3 Centrifugal Pump - Three Phase - 95 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA/I 2.00 T IE3 Centrifugal Pump - Three Phase - 120 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMA/I 3.00 T IE3 Centrifugal Pump - Three Phase - 140 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMB 0.75 T Centrifugal Pump - Three Phase - 250 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMB/I 1.00 T IE3 Centrifugal Pump - Three Phase - 250 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMB/I 1.50 T IE3 Centrifugal Pump - Three Phase - 280 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMB/I 2.00 T IE3 Centrifugal Pump - Three Phase - 280 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMB/I 3.00 T IE3 Centrifugal Pump - Three Phase - 280 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).

The Ebara - CMB/I 4.00 T IE3 Centrifugal Pump - Three Phase - 280 Ltr/min - 400 V is a Single-impeller centrifugal pump with cast iron body, available in different models: CMA - CMB - CMC - CMD. Depending on the model, the impellers, shafts and motor mount can be made of different materials (see technical data table).