Flamco

Purpose-built for sealed systems, the FLAMCO – Pro PU 131 is a compact, wall-mounted digital pressurisation unit that uses an electronic pressure transducer and microprocessor control to maintain stable system pressure.

Delivering top-up flow rates up to 12 L/min via a 4 Ltrs internal break tank, it suits commercial, industrial and large domestic applications. The Pro PUm range supports single or twin-pump configurations and is tuned for quick installation and commissioning.

• 0.1 Bar pressure-set increments; max 3 Bar
• MODBUS RTU communications; password-protected access
• Dry-run protection and flood-protection routines
• Service reminder after 12 months

Finished in grey (RAL 7016) and powered from 230V 50Hz 1ph, the unit features bi-directional menus, system fill mode and detailed event logging for hassle-free operation.

Designed for high-volume sealed systems, the FLAMCO 21603 Pro PU 231/1-3 is a floor-standing digital pressurisation unit using an electronic pressure transducer and microprocessor control to keep system pressure stable and safe.

Delivering top-up flow rates up to 18 L/min via an 18 Ltrs internal break tank, it suits commercial, industrial and large domestic applications. Available in single or twin-pump configurations for sealed LPHW/CHW systems (guide volume up to 300,000 Ltrs).

• Pressure setting in 0.1 Bar increments (max 3 Bar)
• MODBUS RTU communications; password-protected access; bi-directional menu
• Service reminder after 12 months; system fill mode
• Dry-run, anti-seize routine and flood-protection functions

Finished in grey (RAL 7016) and powered from 230V 50Hz 1ph, the Pro PU logs events and offers extensive volt-free contacts for BMS integration.

Built for reliable sealed-system top-up, the Flamco Flexfiller 150D is a floor-standing digital pressurisation unit using an electronic pressure transducer and microprocessor control to maintain minimum system pressure with precision.

It delivers up to 18 L/min top-up via an 18 Ltrs internal break tank and suits commercial, industrial and large domestic installations. Available in single or twin-pump configurations for sealed LPHW/CHW systems (guide volume up to 300,000 Ltrs).

• Digital control with electronic pressure transducer
• 18 Ltrs break tank; up to 18 L/min top-up
• MODBUS RTU communications; password-protected access
• Fluid Protection Category 5 (Type AB weir overflow)

Finished in black (RAL 9005) with a sequential programming menu, system fill mode and 12-month on-screen service reminder for straightforward commissioning and operation.

Engineered for sealed systems, the Flamco Flexfiller Midi 250D is a compact, wall-mounted digital pressurisation unit using an electronic pressure transducer and microprocessor control to maintain stable minimum pressure. This is a Twin Pump unit.

Buy the Flamco Flexfiller Midi Pressurisation Unit from Pumpify and recieve free standard delivery.

It provides top-up flow rates up to 12 L/min via a 4 Ltrs internal break tank and suits commercial, industrial and large domestic applications. Pressure is adjustable in 0.1 Bar steps across a 15 Bar range.

• 4 Ltrs break tank; up to 12 L/min top-up
• Category 5 protection (Type AB weir overflow)
• MODBUS RTU communications; password-protected menus
• System fill mode and pump pulse option

Finished in white (RAL 9003) with a sequential programming menu, flood-protection routines and comprehensive event logging for straightforward commissioning and operation.

Blending top-up pressurisation with on-demand chemical dosing, the Flamco PressDS 225D Twin Pump maintains stable pressure on sealed systems while automatically mixing inhibitor from a dedicated tank at a preset ratio.

This floor-standing unit features a 4 Ltrs mains-fed break tank and an 18 Ltrs additive reservoir. Each top-up delivers water and the correct fluid blend together, cutting site visits and maximising system protection. Ideal for commercial and industrial plant (guide volume up to 300,000 Ltrs).

• Dual pump duty/standby configuration
• Mix control user-set from 150%
• Top-up to < 18 L/min; max delivery 3 Bar
• Category 5 (Type AB weir overflow) protection

Integration is simple via MODBUS RTU, password-protected menus and volt-free contacts, with flood protection, service reminders and additive-empty alerts built in. Finished in black (RAL 9005).

Engineered for sealed systems, the FLAMCO Midi PSD 150D vacuum degasser (Pressure Step Degasser) strips dissolved gases to stabilise pressure and improve plant efficiency. Single pump.

Buy the Flamco PSD Degasser from Pumpify and recieve free standard delivery.

The unit samples system fluid, isolates it and applies a full vacuum so dissolved air is released per Henry's Law, vents this to atmosphere, then returns deaerated water to the circuit. A digital processor automates the cycle with a turbo mode for rapid commissioning and a real-time status display.

• Automatic vacuum deaeration with turbo & normal intervals
• Digital control and real-time component status
• Password-protected settings; 0.1 Bar pressure steps
• Event logging and volt-free common fault output

Suitable for commercial, industrial and residential LPHW/CHW applications. Model guide volume: up to 50,000 Ltrs (larger variants available up to 300,000 Ltrs).

Built for tight installs, the Flexfiller Mini 130D is a slim, wall-mounted, single pump digital pressurisation unit for sealed LPHW/CHW systems, using an electronic pressure transducer and microprocessor control to maintain minimum system pressure.

A 0.4 L/min low-flow top-up paired with a 2 Ltrs internal break tank suits small commercial or large domestic applications. Pressure is adjustable in 0.1 Bar steps across a 0.53 Bar range. Suitable for heating systems with expansion vessels ≤ 300 Ltrs or chilled systems with expansion vessels ≤ 50 Ltrs. Single or twin-pump configurations available.

• Digital control with electronic pressure transducer
• 0.4 L/min top-up; 2 Ltrs break tank
• MODBUS RTU integration; password-protected access
• Category 5 protection (Type AB weir overflow)

Finished in white (RAL 9003) and powered from 230V 50Hz 1ph, the Mini 130D adds flood-protection routines, event logging and a 12-month on-screen service reminder for straightforward commissioning and operation.

Built for tight installs, the Flexfiller Mini 230D is a slim, wall-mounted, dual pump digital pressurisation unit for sealed LPHW/CHW systems, using an electronic pressure transducer and microprocessor control to maintain minimum system pressure.

A 0.4 L/min low-flow top-up paired with a 2 Ltrs internal break tank suits small commercial or large domestic applications. Pressure is adjustable in 0.1 Bar steps across a 0.53 Bar range. Suitable for heating systems with expansion vessels ≤ 300 Ltrs or chilled systems with expansion vessels ≤ 50 Ltrs. Single or twin-pump configurations available.

• Digital control with electronic pressure transducer
• 0.4 L/min top-up; 2 Ltrs break tank
• MODBUS RTU integration; password-protected access
• Category 5 protection (Type AB weir overflow)

Finished in white (RAL 9003) and powered from 230V 50Hz 1ph, the Mini 130D adds flood-protection routines, event logging and a 12-month on-screen service reminder for straightforward commissioning and operation.

Built for sealed heating and chilled water plant requiring automatic top-up, this Flexfiller MiniPress 130 delivers reliable performance with a tidy, installer'friendly form.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Digital control and monitoring
• Automatic cold-fill top-up
• Compact wall-mounted format

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.

Maximum operating conditions

Certifications and Standards Applied

The Flamco Flexfiller MiniPress 230 - Digital Pressurisation Unit is a Pressurisation Unit item. This product is manufactured by Flamco. Voltage for this item is 230V.

The operating pressure of this is 3 bar.