Flamco

Built for sealed heating (EN 12828) and chilled-water systems, Flexcon Premium Expansion Vessels stabilise system pressure by absorbing thermal expansion so plant runs safely and efficiently.

A new TPO (thermoplastic polyolefin) diaphragm on 1235 Ltrs models delivers high flexibility and extremely low permeability, helping the pre-charge hold for longer. Lighter construction cuts material use and transport emissions; packaging is FSC-certified to reduce CO₂ impact.

• Sustainable design lighter TPO membrane uses up to 50% less material
• Long service life 15-year warranty
• Low permeability pre-charge pressure maintained for longer
• Heating & cooling suitable for LPHW and CHW installations

Vessels comply with EN 13831 and the Pressure Equipment Directive 2014/68/EU. Red epoxy powder coating (RAL 3002). Flexcon Premium 3580 are supplied with feet and a mounting kit.

Built for sealed heating (EN 12828) and chilled-water systems, Flexcon Premium Expansion Vessels stabilise system pressure by absorbing thermal expansion so plant runs safely and efficiently.

A new TPO (thermoplastic polyolefin) diaphragm on 1235 Ltrs models delivers high flexibility and extremely low permeability, helping the pre-charge hold for longer. Lighter construction cuts material use and transport emissions; packaging is FSC-certified to reduce CO₂ impact.

• Sustainable design lighter TPO membrane uses up to 50% less material
• Long service life 15-year warranty
• Low permeability pre-charge pressure maintained for longer
• Heating & cooling suitable for LPHW and CHW installations

Vessels comply with EN 13831 and the Pressure Equipment Directive 2014/68/EU. Red epoxy powder coating (RAL 3002). Flexcon Premium 3580 are supplied with feet and a mounting kit.

Built for sealed potable hot and chilled water systems in domestic and commercial settings, these Potable Water Expansion Vessels stabilise pressure by absorbing thermal expansion for safe, reliable operation.

A nitrogen pre-charge helps retain set pressure longer, while a single threaded steel connection with plastic insert provides a durable, non-flow-through design. Suitable for central heating, cooling and tap water applications (not for solar collector circuits).

• Nitrogen gas filling for longer pre-charge retention
• Single threaded steel connection with plastic insert (no flow-through)
• Potable use supports domestic hot/chilled water
• Heating & cooling compatible for sealed systems

Designed for long service life with broad operating limits and glycol tolerance for demanding installations.

Built for sealed potable hot and chilled water systems in domestic and commercial settings, these Potable Water Expansion Vessels stabilise pressure by absorbing thermal expansion for safe, reliable operation.

A nitrogen pre-charge helps retain set pressure longer, while a single threaded steel connection with plastic insert provides a durable, non-flow-through design. Suitable for central heating, cooling and tap water applications (not for solar collector circuits).

• Nitrogen gas filling for longer pre-charge retention
• Single threaded steel connection with plastic insert (no flow-through)
• Potable use supports domestic hot/chilled water
• Heating & cooling compatible for sealed systems

Designed for long service life with broad operating limits and glycol tolerance for demanding installations.

Purpose-built for solar thermal circuits, the Flexcon Solar 8/2.5 [8Bar] expansion vessel supports sealed systems in line with EN 12828, keeping pressure stable in high-temperature applications.

A preformed butyl rolling diaphragm with extremely low permeability helps retain pre-charge, while a nitrogen fill limits corrosion and pressure loss. The clench ring clamps the diaphragm evenly to prevent damage, and a ribbed profile avoids sticking for instant inflow. An uncoated connection thread aids watertight installation; the steel vessel is finished in a gleaming epoxy-powder coat and factory tested.

• Solar-ready expansion vessel for sealed systems
• Butyl rolling diaphragm with very low permeability
• Nitrogen pre-charge for longer pressure stability
• Clench ring construction for a robust, uniform seal

For 880 Ltrs models: both halves are coated before assembly to protect the clamp ring, and the nitrogen valve is countersunk and covered. Continuous medium temperature range −10 to 110 C.

Purpose-built for solar thermal circuits, the Flexcon Solar 8/2.5 [8Bar] expansion vessel supports sealed systems in line with EN 12828, keeping pressure stable in high-temperature applications.

A preformed butyl rolling diaphragm with extremely low permeability helps retain pre-charge, while a nitrogen fill limits corrosion and pressure loss. The clench ring clamps the diaphragm evenly to prevent damage, and a ribbed profile avoids sticking for instant inflow. An uncoated connection thread aids watertight installation; the steel vessel is finished in a gleaming epoxy-powder coat and factory tested.

• Solar-ready expansion vessel for sealed systems
• Butyl rolling diaphragm with very low permeability
• Nitrogen pre-charge for longer pressure stability
• Clench ring construction for a robust, uniform seal

For 880 Ltrs models: both halves are coated before assembly to protect the clamp ring, and the nitrogen valve is countersunk and covered. Continuous medium temperature range −10 to 110 C.

Dose system chemicals cleanly with the Flamco Dosing Pot—a welded mild-steel assembly that lets you introduce inhibitors, biocides or antifreeze in a controlled, safe way for sealed LPHW and CHW systems.

Supplied fully assembled with tundish, vessel, air vent, inlet, outlet and drain valves, it's simple to install and operate. An internally uncoated finish ensures compatibility with standard water-treatment chemicals.

• Plug-and-play: shipped ready to fit
• Easy dosing: controlled chemical introduction
• Protects plant: improves efficiency and extends system life
• Robust build: mild-steel, welded construction

Built for closed heating and chilled water systems requiring inhibitor dosing, this Mild Steel Dosing Pot delivers reliable performance with a tidy, installer'friendly form.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Robust mild-steel construction
• Safe chemical dosing point
• Clear isolation and purge process

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.

Built for sealed LPHW/CHW systems, this Airfix Expansion Vessel delivers reliable performance with a tidy, installer'friendly form.

For use in potable water, or fresh-water installations.

The Airfix D expansion vessels operate in such a way that the water flows right through and they are continuously flushed with fresh water from the mains.

This prevents tepid, stagnant water from collecting in the vessel in which bacterial growth could occur.

Therefore, users can be assured of high quality potable water.

Applying an Airfix D expansion vessel to a water heater prevents the opening of the safety group or safety valve each time the potable water is heated.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Reliable absorption of system expansion
• Factory pre-charge for quick commissioning
• Durable diaphragm construction

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.

Developed for sealed LPHW/CHW systems, this Baseflex 35 Heating Expansion Vessel delivers reliable performance with a tidy, installer'friendly form.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Reliable absorption of system expansion
• Factory pre-charge for quick commissioning
• Durable diaphragm construction

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.