Flamco

Built for sealed heating (EN 12828) and chilled-water systems, Flexcon Premium Expansion Vessels stabilise system pressure by absorbing thermal expansion so plant runs safely and efficiently.

A new TPO (thermoplastic polyolefin) diaphragm on 1235 Ltrs models delivers high flexibility and extremely low permeability, helping the pre-charge hold for longer. Lighter construction cuts material use and transport emissions; packaging is FSC-certified to reduce CO₂ impact.

• Sustainable design lighter TPO membrane uses up to 50% less material
• Long service life 15-year warranty
• Low permeability pre-charge pressure maintained for longer
• Heating & cooling suitable for LPHW and CHW installations

Vessels comply with EN 13831 and the Pressure Equipment Directive 2014/68/EU. Red epoxy powder coating (RAL 3002). Flexcon Premium 3580 are supplied with feet and a mounting kit.

Built for sealed heating (EN 12828) and chilled-water systems, Flexcon Premium Expansion Vessels stabilise system pressure by absorbing thermal expansion so plant runs safely and efficiently.

A new TPO (thermoplastic polyolefin) diaphragm on 1235 Ltrs models delivers high flexibility and extremely low permeability, helping the pre-charge hold for longer. Lighter construction cuts material use and transport emissions; packaging is FSC-certified to reduce CO₂ impact.

• Sustainable design lighter TPO membrane uses up to 50% less material
• Long service life 15-year warranty
• Low permeability pre-charge pressure maintained for longer
• Heating & cooling suitable for LPHW and CHW installations

Vessels comply with EN 13831 and the Pressure Equipment Directive 2014/68/EU. Red epoxy powder coating (RAL 3002). Flexcon Premium 3580 are supplied with feet and a mounting kit.

Built for sealed heating (EN 12828) and chilled-water systems, Flexcon Premium Expansion Vessels stabilise system pressure by absorbing thermal expansion so plant runs safely and efficiently.

A new TPO (thermoplastic polyolefin) diaphragm on 1235 Ltrs models delivers high flexibility and extremely low permeability, helping the pre-charge hold for longer. Lighter construction cuts material use and transport emissions; packaging is FSC-certified to reduce CO₂ impact.

• Sustainable design lighter TPO membrane uses up to 50% less material
• Long service life 15-year warranty
• Low permeability pre-charge pressure maintained for longer
• Heating & cooling suitable for LPHW and CHW installations

Vessels comply with EN 13831 and the Pressure Equipment Directive 2014/68/EU. Red epoxy powder coating (RAL 3002). Flexcon Premium 3580 are supplied with feet and a mounting kit.

Blending top-up pressurisation with on-demand chemical dosing, the Flamco PressDS 225D Twin Pump maintains stable pressure on sealed systems while automatically mixing inhibitor from a dedicated tank at a preset ratio.

This floor-standing unit features a 4 Ltrs mains-fed break tank and an 18 Ltrs additive reservoir. Each top-up delivers water and the correct fluid blend together, cutting site visits and maximising system protection. Ideal for commercial and industrial plant (guide volume up to 300,000 Ltrs).

• Dual pump duty/standby configuration
• Mix control user-set from 150%
• Top-up to < 18 L/min; max delivery 3 Bar
• Category 5 (Type AB weir overflow) protection

Integration is simple via MODBUS RTU, password-protected menus and volt-free contacts, with flood protection, service reminders and additive-empty alerts built in. Finished in black (RAL 9005).

Blending top-up pressurisation with on-demand chemical dosing, the Flamco PressDS 250D Twin Pump maintains stable pressure on sealed systems while automatically mixing inhibitor from a dedicated tank at a preset ratio.

This floor-standing unit features a 4 Ltrs mains-fed break tank and an 18 Ltrs additive reservoir. Each top-up delivers water and the correct fluid blend together, cutting site visits and maximising system protection. Ideal for commercial and industrial plant (guide volume up to 300,000 Ltrs).

• Dual pump duty/standby configuration
• Mix control user-set from 150%
• Top-up to < 18 L/min; max delivery 6 Bar
• Category 5 (Type AB weir overflow) protection

Integration is simple via MODBUS RTU, password-protected menus and volt-free contacts, with flood protection, service reminders and additive-empty alerts built in. Finished in black (RAL 9005).

Blending top-up pressurisation with on-demand chemical dosing, the Flamco PressDS 280D Twin Pump maintains stable pressure on sealed systems while automatically mixing inhibitor from a dedicated tank at a preset ratio.

This floor-standing unit features a 4 Ltrs mains-fed break tank and an 18 Ltrs additive reservoir. Each top-up delivers water and the correct fluid blend together, cutting site visits and maximising system protection. Ideal for commercial and industrial plant (guide volume up to 300,000 Ltrs).

• Dual pump duty/standby configuration
• Mix control user-set from 150%
• Top-up to < 18 L/min; max delivery 3 Bar
• Category 5 (Type AB weir overflow) protection

Integration is simple via MODBUS RTU, password-protected menus and volt-free contacts, with flood protection, service reminders and additive-empty alerts built in. Finished in black (RAL 9005).

Flamco Flexcon Expansion Vessel - 140Ltr - Engineered for EN 12828 heating and chilled-water systems, this Expansion Vessel stabilises sealed system pressure by absorbing thermal expansion in LPHW/CHW applications.

Maximum working pressure: 10.0 bar.

Vessels in accordance with EN13831.

Suitable for systems with a maximum system temperature of 120 °C.

Minimum/maximum temperature diaphragm: -10 / 90 °C.

Suitable for addition of glycol-based anti-freeze up to 50%.

A flexible rolling diaphragm with a ribbed profile prevents sticking and encourages inflow at the slightest pressure rise, while a nitrogen pre-charge helps maintain set pressure longer. The uncoated connection thread supports quick, watertight installation.

• Rolling-diaphragm design for smooth expansion control
• Nitrogen pre-charge for extended pre-pressure retention
• Top-quality steel with epoxy-powder finish
• Factory tested for reliability

Built for long service life in domestic, commercial and industrial plant rooms, with continuous medium temperatures from −10 to 70 C.

Purpose-built for solar thermal circuits, the Flexcon Solar 8/2.5 [8Bar] expansion vessel supports sealed systems in line with EN 12828, keeping pressure stable in high-temperature applications.

A preformed butyl rolling diaphragm with extremely low permeability helps retain pre-charge, while a nitrogen fill limits corrosion and pressure loss. The clench ring clamps the diaphragm evenly to prevent damage, and a ribbed profile avoids sticking for instant inflow. An uncoated connection thread aids watertight installation; the steel vessel is finished in a gleaming epoxy-powder coat and factory tested.

• Solar-ready expansion vessel for sealed systems
• Butyl rolling diaphragm with very low permeability
• Nitrogen pre-charge for longer pressure stability
• Clench ring construction for a robust, uniform seal

For 880 Ltrs models: both halves are coated before assembly to protect the clamp ring, and the nitrogen valve is countersunk and covered. Continuous medium temperature range −10 to 110 C.

Purpose-built for solar thermal circuits, the Flexcon Solar 8/2.5 [8Bar] expansion vessel supports sealed systems in line with EN 12828, keeping pressure stable in high-temperature applications.

A preformed butyl rolling diaphragm with extremely low permeability helps retain pre-charge, while a nitrogen fill limits corrosion and pressure loss. The clench ring clamps the diaphragm evenly to prevent damage, and a ribbed profile avoids sticking for instant inflow. An uncoated connection thread aids watertight installation; the steel vessel is finished in a gleaming epoxy-powder coat and factory tested.

• Solar-ready expansion vessel for sealed systems
• Butyl rolling diaphragm with very low permeability
• Nitrogen pre-charge for longer pressure stability
• Clench ring construction for a robust, uniform seal

For 880 Ltrs models: both halves are coated before assembly to protect the clamp ring, and the nitrogen valve is countersunk and covered. Continuous medium temperature range −10 to 110 C.

Dose system chemicals cleanly with the Flamco Dosing Pot—a welded mild-steel assembly that lets you introduce inhibitors, biocides or antifreeze in a controlled, safe way for sealed LPHW and CHW systems.

Supplied fully assembled with tundish, vessel, air vent, inlet, outlet and drain valves, it's simple to install and operate. An internally uncoated finish ensures compatibility with standard water-treatment chemicals.

• Plug-and-play: shipped ready to fit
• Easy dosing: controlled chemical introduction
• Protects plant: improves efficiency and extends system life
• Robust build: mild-steel, welded construction

Built for sealed LPHW/CHW systems, this Airfix Expansion Vessel delivers reliable performance with a tidy, installer'friendly form.

For use in potable water, or fresh-water installations.

The Airfix D expansion vessels operate in such a way that the water flows right through and they are continuously flushed with fresh water from the mains.

This prevents tepid, stagnant water from collecting in the vessel in which bacterial growth could occur.

Therefore, users can be assured of high quality potable water.

Applying an Airfix D expansion vessel to a water heater prevents the opening of the safety group or safety valve each time the potable water is heated.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Reliable absorption of system expansion
• Factory pre-charge for quick commissioning
• Durable diaphragm construction

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.