Flamco

When space is tight, the Flamco XStream Vent-Clean combines high-efficiency air and dirt separation to protect plant and boost performance in sealed heating and cooling systems.

A unique ECO/MAX selector lets you choose partial-flow (ECO) or full-flow (MAX) operation. Expect measurable gains: up to 15% lower energy use and up to 6% higher system efficiency*. The body rotates 360°, works in any flow direction, and includes integrated insulation to minimise heat loss. A powerful internal magnet enhances magnetite capture, and a service indicator shows the last MAX-mode flush/vent.

• Dual function: air & dirt removal in one compact unit
• ECO/MAX modes for targeted or full-flow separation
• 360° rotatable design; variable flow direction
• Integrated insulation to cut standby losses
• Magnetic assist for efficient magnetite capture
• Service indicator for quick maintenance checks

For use in potable water, or fresh-water installations.

The Airfix D expansion vessels operate in such a way that the water flows right through and they are continuously flushed with fresh water from the mains.

This prevents tepid, stagnant water from collecting in the vessel in which bacterial growth could occur.

Therefore, users can be assured of high quality potable water.

Applying an Airfix D expansion vessel to a water heater prevents the opening of the safety group or safety valve each time the potable water is heated.

The Flamco Airfix D 8 Expansion Vessel - 8 Litre - 4 bar. is a Expansion Vessel item.

Maintain potable water hygiene and stable pressure with the Flamco Airfix A flow-through expansion vessel for mains-fed potable and fresh-water systems.

For use in potable water, or fresh-water installations.

The Airfix A expansion vessels operate in such a way that the water flows right through and they are continuously flushed with fresh water from the mains.

This prevents tepid, stagnant water from collecting in the vessel in which bacterial growth could occur.

Therefore, users can be assured of high quality potable water.

Applying an Airfix A expansion vessel to a water heater prevents the opening of the safety group or safety valve each time the potable water is heated.

A synthetic flow-through device installed in a standard T-piece (not included) diverts part of the line flow through the vessel to prevent stagnation. This reduces nuisance safety-valve lift on water heaters and avoids waste, while keeping water continuously refreshed.

• Flow-through design helps suppress bacterial growth
• Protects safety devices by reducing valve lift and leakage risk
• Taste/odour neutral butyl diaphragm for potable use
• Corrosion-resistant internal coatings on water and nitrogen sides

Factory nitrogen pre-charge supports long-term pressure stability. Internationally approved and certified. Compatible with Airfixcontrol for quick annual pre-charge checks.

The Flamco Airfix P DHW Expansion Vessel - 24 Litre - 2.7 bar. - Horizontal is a Expansion Vessel item.

The Flamco Airfix P Expansion Vessel - 50 Litre - 2.7 bar. - Horizontal is a Expansion Vessel item.

The Flamco Airfix P Expansion Vessel - 60 Litre - 2.7 bar. - Horizontal is a Expansion Vessel item.

The Flamco Airfix P Expansion Vessel - 100 Litre - 2.7 bar. - Horizontal is a Expansion Vessel item.

The Flamco Airfix P DWH Expansion Vessel - 200 Litre - 2.7 bar. - Horizontal is a Expansion Vessel item.

The Flamco Airfix P DHW Expansion Vessel - 300 Litre - 2.7 bar. - Horizontal is a Expansion Vessel item.

For mounting expansion vessels without clench ring (2 - 35 litres) to the wall.

The Flamco Band Fitting for Airfix Potable Vessel -

Branch live pipework cleanly with Flamco's T-plus—no drain-down, no hammer; a trigger-fired mechanism punches a precise opening and forms a sealed take-off in seconds.

The T-plus uses a plunger, striking pin and single-use trigger to make perfect branches even in tight spaces. Installers avoid draining (so no air or dirt ingresses), keep systems running, and deliver a reliable seal thanks to the integrated gasket and anti-corrosion coating.

• Live-branching: create branches while the system remains in operation
• Trigger mechanism: clean, consistent cut—no hammer required
• Space-saving: works where access is restricted
• Sealing & durability: optimum pipe seal with anti-corrosion coating
• Single-use trigger: one-shot cartridge included with each T-plus
• Fast prep: click-in nuts on models from 1 ½"

Applications include central heating and cooling, potable water, solar thermal, fire protection and industrial services (e.g. compressed air). Two body options are available: cast-iron for thick-walled steel pipework, and brass for copper, thin-walled steel and Stainless Steel.

Branch live pipework cleanly with Flamco's T-plus—no drain-down, no hammer; a trigger-fired mechanism punches a precise opening and forms a sealed take-off in seconds.

The T-plus uses a plunger, striking pin and single-use trigger to make perfect branches even in tight spaces. Installers avoid draining (so no air or dirt ingresses), keep systems running, and deliver a reliable seal thanks to the integrated gasket and anti-corrosion coating.

• Live-branching: create branches while the system remains in operation
• Trigger mechanism: clean, consistent cut—no hammer required
• Space-saving: works where access is restricted
• Sealing & durability: optimum pipe seal with anti-corrosion coating
• Single-use trigger: one-shot cartridge included with each T-plus
• Fast prep: click-in nuts on models from 1 ½"

Applications include central heating and cooling, potable water, solar thermal, fire protection and industrial services (e.g. compressed air). Two body options are available: cast-iron for thick-walled steel pipework, and brass for copper, thin-walled steel and Stainless Steel.

Branch live pipework cleanly with Flamco's T-plus—no drain-down, no hammer; a trigger-fired mechanism punches a precise opening and forms a sealed take-off in seconds.

The T-plus uses a plunger, striking pin and single-use trigger to make perfect branches even in tight spaces. Installers avoid draining (so no air or dirt ingresses), keep systems running, and deliver a reliable seal thanks to the integrated gasket and anti-corrosion coating.

• Live-branching: create branches while the system remains in operation
• Trigger mechanism: clean, consistent cut—no hammer required
• Space-saving: works where access is restricted
• Sealing & durability: optimum pipe seal with anti-corrosion coating
• Single-use trigger: one-shot cartridge included with each T-plus
• Fast prep: click-in nuts on models from 1 ½"

Applications include central heating and cooling, potable water, solar thermal, fire protection and industrial services (e.g. compressed air). Two body options are available: cast-iron for thick-walled steel pipework, and brass for copper, thin-walled steel and Stainless Steel.

Branch live pipework cleanly with Flamco's T-plus—no drain-down, no hammer; a trigger-fired mechanism punches a precise opening and forms a sealed take-off in seconds.

The T-plus uses a plunger, striking pin and single-use trigger to make perfect branches even in tight spaces. Installers avoid draining (so no air or dirt ingresses), keep systems running, and deliver a reliable seal thanks to the integrated gasket and anti-corrosion coating.

• Live-branching: create branches while the system remains in operation
• Trigger mechanism: clean, consistent cut—no hammer required
• Space-saving: works where access is restricted
• Sealing & durability: optimum pipe seal with anti-corrosion coating
• Single-use trigger: one-shot cartridge included with each T-plus
• Fast prep: click-in nuts on models from 1 ½"

Applications include central heating and cooling, potable water, solar thermal, fire protection and industrial services (e.g. compressed air). Two body options are available: cast-iron for thick-walled steel pipework, and brass for copper, thin-walled steel and Stainless Steel.

Branch live pipework cleanly with Flamco's T-plus—no drain-down, no hammer; a trigger-fired mechanism punches a precise opening and forms a sealed take-off in seconds.

The T-plus uses a plunger, striking pin and single-use trigger to make perfect branches even in tight spaces. Installers avoid draining (so no air or dirt ingresses), keep systems running, and deliver a reliable seal thanks to the integrated gasket and anti-corrosion coating.

• Live-branching: create branches while the system remains in operation
• Trigger mechanism: clean, consistent cut—no hammer required
• Space-saving: works where access is restricted
• Sealing & durability: optimum pipe seal with anti-corrosion coating
• Single-use trigger: one-shot cartridge included with each T-plus
• Fast prep: click-in nuts on models from 1 ½"

Applications include central heating and cooling, potable water, solar thermal, fire protection and industrial services (e.g. compressed air). Two body options are available: cast-iron for thick-walled steel pipework, and brass for copper, thin-walled steel and Stainless Steel.

Branch live pipework cleanly with Flamco's T-plus—no drain-down, no hammer; a trigger-fired mechanism punches a precise opening and forms a sealed take-off in seconds.

The T-plus uses a plunger, striking pin and single-use trigger to make perfect branches even in tight spaces. Installers avoid draining (so no air or dirt ingresses), keep systems running, and deliver a reliable seal thanks to the integrated gasket and anti-corrosion coating.

• Live-branching: create branches while the system remains in operation
• Trigger mechanism: clean, consistent cut—no hammer required
• Space-saving: works where access is restricted
• Sealing & durability: optimum pipe seal with anti-corrosion coating
• Single-use trigger: one-shot cartridge included with each T-plus
• Fast prep: click-in nuts on models from 1 ½"

Applications include central heating and cooling, potable water, solar thermal, fire protection and industrial services (e.g. compressed air). Two body options are available: cast-iron for thick-walled steel pipework, and brass for copper, thin-walled steel and Stainless Steel.