Flamco

Blending top-up pressurisation with on-demand chemical dosing, the Flamco PressDS 225D Twin Pump maintains stable pressure on sealed systems while automatically mixing inhibitor from a dedicated tank at a preset ratio.

This floor-standing unit features a 4 Ltrs mains-fed break tank and an 18 Ltrs additive reservoir. Each top-up delivers water and the correct fluid blend together, cutting site visits and maximising system protection. Ideal for commercial and industrial plant (guide volume up to 300,000 Ltrs).

• Dual pump duty/standby configuration
• Mix control user-set from 150%
• Top-up to < 18 L/min; max delivery 3 Bar
• Category 5 (Type AB weir overflow) protection

Integration is simple via MODBUS RTU, password-protected menus and volt-free contacts, with flood protection, service reminders and additive-empty alerts built in. Finished in black (RAL 9005).

Blending top-up pressurisation with on-demand chemical dosing, the Flamco PressDS 250D Twin Pump maintains stable pressure on sealed systems while automatically mixing inhibitor from a dedicated tank at a preset ratio.

This floor-standing unit features a 4 Ltrs mains-fed break tank and an 18 Ltrs additive reservoir. Each top-up delivers water and the correct fluid blend together, cutting site visits and maximising system protection. Ideal for commercial and industrial plant (guide volume up to 300,000 Ltrs).

• Dual pump duty/standby configuration
• Mix control user-set from 150%
• Top-up to < 18 L/min; max delivery 6 Bar
• Category 5 (Type AB weir overflow) protection

Integration is simple via MODBUS RTU, password-protected menus and volt-free contacts, with flood protection, service reminders and additive-empty alerts built in. Finished in black (RAL 9005).

Blending top-up pressurisation with on-demand chemical dosing, the Flamco PressDS 280D Twin Pump maintains stable pressure on sealed systems while automatically mixing inhibitor from a dedicated tank at a preset ratio.

This floor-standing unit features a 4 Ltrs mains-fed break tank and an 18 Ltrs additive reservoir. Each top-up delivers water and the correct fluid blend together, cutting site visits and maximising system protection. Ideal for commercial and industrial plant (guide volume up to 300,000 Ltrs).

• Dual pump duty/standby configuration
• Mix control user-set from 150%
• Top-up to < 18 L/min; max delivery 3 Bar
• Category 5 (Type AB weir overflow) protection

Integration is simple via MODBUS RTU, password-protected menus and volt-free contacts, with flood protection, service reminders and additive-empty alerts built in. Finished in black (RAL 9005).

Designed for sealed LPHW/CHW systems, the Flamco PressDS Plus 250D integrates pressurisation, vacuum degassing and on-demand dosing to keep system pressure stable, remove dissolved gases and blend the correct additive mix during top-up.

Buy the Flamco PresDS Plus from Pumps Sales Direct and receive free standard delivery.

A compact, totally enclosed Twin Pump unit, it uses a digital processor to automate the sampleisolatevacuumventreintroduce cycle (with turbo mode for rapid commissioning). Top-up capacity is <18 L/min; an 18 Ltrs additive tank blends inhibitor at the point of fill. Guide system volume: up to 300,000 Ltrs.

• Category 5 protection (Type AB weir overflow)
• MODBUS RTU communications; password-protected access
• Mix ratios user-set from 150% via balancing valves
• Pressure setpoints in 0.1 Bar increments

Ideal for commercial plantrooms, the black (RAL 9005) enclosure includes sequential programming, system fill mode, pump-pulse, flood-protection routines and comprehensive event logging.

Designed for sealed LPHW/CHW systems, the Flamco PressDS Plus 2160D integrates pressurisation, vacuum degassing and on-demand dosing to keep system pressure stable, remove dissolved gases and blend the correct additive mix during top-up.

Buy the Flamco PresDS Plus from Pumps Sales Direct and receive free standard delivery.

A compact, totally enclosed Twin Pump unit, it uses a digital processor to automate the sampleisolatevacuumventreintroduce cycle (with turbo mode for rapid commissioning). Top-up capacity is <18 L/min; an 18 Ltrs additive tank blends inhibitor at the point of fill. Guide system volume: up to 300,000 Ltrs.

• Category 5 protection (Type AB weir overflow)
• MODBUS RTU communications; password-protected access
• Mix ratios user-set from 150% via balancing valves
• Pressure setpoints in 0.1 Bar increments

Ideal for commercial plantrooms, the black (RAL 9005) enclosure includes sequential programming, system fill mode, pump-pulse, flood-protection routines and comprehensive event logging.

Cabinetised and plantroom-ready, the Flamco Flamcomat D02 Cabinetised Pump Set pairs a Grundfos CM1-4 multistage pump with a fully compliant enclosure for dependable duty across commercial and industrial installations.

The set features a compact footprint (680 mm D × 680 mm W × 1400 mm H), straightforward pipework (1 12" vessel and system; 12" top-up) and a dry weight of 105 kg. An IP54-rated controller, IPX5-rated pump and a WRAS-approved float valve to BS1212 Part 2 support safe, long-life operation.

• Includes Grundfos CM1-4 horizontal multistage end-suction pump
• Compact cabinet for easy siting in plantrooms
• IP54 controller / IPX5 pump for robust protection
• WRAS-approved float valve for reliable top-up

Built to recognised standards with CE-marked components, the Flamcomat D02 is suitable for sealed heating and chilled-water plant where reliability and compliance are essential.

Cabinetised and plantroom-ready, the Flamco Flamcomat D02 Cabinetised Pump Set pairs a Grundfos CM3-6 multistage pump with a fully compliant enclosure for dependable duty across commercial and industrial installations.

Buy Flamco cabinetised Flamcomat Pump Sets from Pumpify and recieve free standard delivery.

The Flamco Flamcomat D1 (D10) Cabinetised Pump Set, includes a Grundfos CM3-6 Pump.

The set features a compact footprint (680 mm D × 680 mm W × 1400 mm H), straightforward pipework (1 12" vessel and system; 12" top-up) and a dry weight of 105 kg. An IP54-rated controller, IPX5-rated pump and a WRAS-approved float valve to BS1212 Part 2 support safe, long-life operation.

• Includes Grundfos CM1-4 horizontal multistage end-suction pump
• Compact cabinet for easy siting in plantrooms
• IP54 controller / IPX5 pump for robust protection
• WRAS-approved float valve for reliable top-up

Built to recognised standards with CE-marked components, the Flamcomat D02 is suitable for sealed heating and chilled-water plant where reliability and compliance are essential.

Cabinetised and plantroom-ready, the Flamco Flamcomat D02 Cabinetised Pump Set pairs a Grundfos CM1-4 multistage pump with a fully compliant enclosure for dependable duty across commercial and industrial installations.

Buy Flamco cabinetised Flamcomat Pump Sets from Pumpify and recieve free standard delivery.

The Flamco Flamcomat D2 (D20) Cabinetised Pump Set, includes a Grundfos CM5-6 Pump.

The set features a compact footprint (680 mm D × 680 mm W × 1400 mm H), straightforward pipework (1 12" vessel and system; 12" top-up) and a dry weight of 105 kg. An IP54-rated controller, IPX5-rated pump and a WRAS-approved float valve to BS1212 Part 2 support safe, long-life operation.

• Includes Grundfos CM1-4 horizontal multistage end-suction pump
• Compact cabinet for easy siting in plantrooms
• IP54 controller / IPX5 pump for robust protection
• WRAS-approved float valve for reliable top-up

Built to recognised standards with CE-marked components, the Flamcomat D02 is suitable for sealed heating and chilled-water plant where reliability and compliance are essential.

Cabinetised and plantroom-ready, the Flamco Flamcomat D02 Cabinetised Pump Set pairs a Grundfos CM1-4 multistage pump with a fully compliant enclosure for dependable duty across commercial and industrial installations.

Buy Flamco cabinetised Flamcomat Pump Sets from Pumpify and recieve free standard delivery.

The Flamco Flamcomat D3 (D60) Cabinetised Pump Set, includes a Grundfos CR3-15 Pump.

The set features a compact footprint (680 mm D × 680 mm W × 1400 mm H), straightforward pipework (1 12" vessel and system; 12" top-up) and a dry weight of 105 kg. An IP54-rated controller, IPX5-rated pump and a WRAS-approved float valve to BS1212 Part 2 support safe, long-life operation.

• Includes Grundfos CM1-4 horizontal multistage end-suction pump
• Compact cabinet for easy siting in plantrooms
• IP54 controller / IPX5 pump for robust protection
• WRAS-approved float valve for reliable top-up

Built to recognised standards with CE-marked components, the Flamcomat D02 is suitable for sealed heating and chilled-water plant where reliability and compliance are essential.

Cabinetised and plantroom-ready, the Flamco Flamcomat D02 Cabinetised Pump Set pairs a Grundfos CM1-4 multistage pump with a fully compliant enclosure for dependable duty across commercial and industrial installations.

Buy Flamco cabinetised Flamcomat Pump Sets from Pumpify and recieve free standard delivery.

The Flamco Flamcomat D4 (D80) Cabinetised Pump Set, includes a Grundfos CR3-17 Pump.

The set features a compact footprint (680 mm D × 680 mm W × 1400 mm H), straightforward pipework (1 12" vessel and system; 12" top-up) and a dry weight of 105 kg. An IP54-rated controller, IPX5-rated pump and a WRAS-approved float valve to BS1212 Part 2 support safe, long-life operation.

• Includes Grundfos CM1-4 horizontal multistage end-suction pump
• Compact cabinet for easy siting in plantrooms
• IP54 controller / IPX5 pump for robust protection
• WRAS-approved float valve for reliable top-up

Built to recognised standards with CE-marked components, the Flamcomat D02 is suitable for sealed heating and chilled-water plant where reliability and compliance are essential.

Cabinetised and plantroom-ready, the Flamco Flamcomat D02 Cabinetised Pump Set pairs a Grundfos CM1-4 multistage pump with a fully compliant enclosure for dependable duty across commercial and industrial installations.

Buy Flamco cabinetised Flamcomat Pump Sets from Pumpify and recieve free standard delivery.

The Flamco Flamcomat D5 (D100) Cabinetised Pump Set, includes a Grundfos CR3-23 Pump.

The set features a compact footprint (680 mm D × 680 mm W × 1400 mm H), straightforward pipework (1 12" vessel and system; 12" top-up) and a dry weight of 105 kg. An IP54-rated controller, IPX5-rated pump and a WRAS-approved float valve to BS1212 Part 2 support safe, long-life operation.

• Includes Grundfos CM1-4 horizontal multistage end-suction pump
• Compact cabinet for easy siting in plantrooms
• IP54 controller / IPX5 pump for robust protection
• WRAS-approved float valve for reliable top-up

Built to recognised standards with CE-marked components, the Flamcomat D02 is suitable for sealed heating and chilled-water plant where reliability and compliance are essential.

Cabinetised and plantroom-ready, the Flamco Flamcomat D02 Cabinetised Pump Set pairs a Grundfos CM1-4 multistage pump with a fully compliant enclosure for dependable duty across commercial and industrial installations.

Buy Flamco cabinetised Flamcomat Pump Sets from Pumpify and recieve free standard delivery.

The Flamco Flamcomat D6 (D130) Cabinetised Pump Set, includes a Grundfos CR3-31 Pump.

The set features a compact footprint (680 mm D × 680 mm W × 1400 mm H), straightforward pipework (1 12" vessel and system; 12" top-up) and a dry weight of 105 kg. An IP54-rated controller, IPX5-rated pump and a WRAS-approved float valve to BS1212 Part 2 support safe, long-life operation.

• Includes Grundfos CM1-4 horizontal multistage end-suction pump
• Compact cabinet for easy siting in plantrooms
• IP54 controller / IPX5 pump for robust protection
• WRAS-approved float valve for reliable top-up

Built to recognised standards with CE-marked components, the Flamcomat D02 is suitable for sealed heating and chilled-water plant where reliability and compliance are essential.

Purpose-made for Flamcomat vessels, this two-piece connection hose kit links the main or auxiliary vessel to the pump-unit for fast, leak-tight installation.

Each assembly provides a G 1½" female vessel end and G 1½" male pump end over a 500 mm working length, using braided hose with a ball valve and drainage valve for safe isolation and service.

• Set of 2 pre-made flexible connections
• 500 mm length (approx. 0.5 m)
• Face-sealed female vessel side for reliable sealing
• Integrated ball & drain valves for easy maintenance

Rated to 6 Bar and 110 °C, the hoses are suited to demanding sealed system duties in commercial plantrooms.

Purpose-made for Flamcomat vessels, this two-piece connection hose kit links the main or auxiliary vessel to the pump-unit for fast, leak-tight installation.

Each assembly provides a G 1½" female vessel end and G 1½" male pump end over a 750 mm working length, using braided hose with a ball valve and drainage valve for safe isolation and service.

• Set of 2 pre-made flexible connections
• 750 mm length (approx. 0.5 m)
• Face-sealed female vessel side for reliable sealing
• Integrated ball & drain valves for easy maintenance

Rated to 6 Bar and 110 °C, the hoses are suited to demanding sealed system duties in commercial plantrooms.

Purpose-made for Flamcomat vessels, this two-piece connection hose kit links the main or auxiliary vessel to the pump-unit for fast, leak-tight installation.

Each assembly provides a G 1½" female vessel end and G 1½" male pump end over a 1000 mm working length, using braided hose with a ball valve and drainage valve for safe isolation and service.

• Set of 2 pre-made flexible connections
• 1000 mm length (approx. 1 m)
• Face-sealed female vessel side for reliable sealing
• Integrated ball & drain valves for easy maintenance

Rated to 6 Bar and 110 °C, the hoses are suited to demanding sealed system duties in commercial plantrooms.

Flamco - Ball valve DN 32 - with adapter

This is a Spares/Kit item, please get in touch for product compatibility.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.