Flamco

Engineered for sealed systems, the Flexfiller combines an electronic pressure transducer with a user-friendly microprocessor to maintain minimum system pressure with precision.

Floor-standing with an 18 Ltrs internal break tank, it delivers top-up flow rates up to 18 L/min. Ideal for commercial, industrial and large domestic applications, Flexfiller is available in single or twin-pump configurations.

• Digital control with electronic pressure transducer
• 18 Ltrs break tank; up to 18 L/min top-up
• MODBUS RTU integration; password-protected access
• Category 5 protection (AB weir overflow)

Guide system volume up to 300,000 Ltrs. Black enclosure (RAL 9005). Power options: 230V 50Hz 1ph or (2160D) 415V 50Hz 3ph.

Designed for tight plant rooms, this mechanical, fully enclosed pressurisation unit 130HL maintains minimum system pressure on sealed circuits with an electronic pressure transducer and simple, reliable controls.

The narrow, wall-mounted design provides a 0.4 L/min top-up rate via a 2 Ltrs internal break tank, making it ideal for large residential or small commercial applications.

• Low-flow top-up: up to 0.4 L/min
• Compact wall mount with narrow footprint
• 2 Ltrs break tank with Type AB air gap (Fluid Category 5)
• Sealed systems: suitable for heating and chilled water

Recommended for sealed heating systems using an expansion vessel of ≤ 300 Ltrs or chilled systems with an expansion vessel of ≤ 50 Ltrs; guide system volume < 2,600 Ltrs.

The Flexfiller Direct G4 is the latest in pumpless digital pressurisation technology for light commercial and residential buildings. Its a slim, wall-mounted pumpless top-up pressurisation unit, with a top-up flow rate of up to 14 l/min depending on the mains or boosted mains, water pressure. It is designed to be connected directly to a buildings incoming water supply using the included flexible hose. It is there to fill and maintain the pressure of a heating or chilled water system without the need for a pump

The unit comes with a user-friendly controller that displays all operating and error conditions comprehensibly and conveniently. It features extensive data storage for online and offline analysis, microprocessor control, and self-learning algorithms with a graphical display. It comes with MODBUS RTU and BACnet communication protocols as standard and has its key operating parameters password protected.

Features & Benefits:

• Silent, Pumpless pressurisation unit
• FIlls system from empty
• For systems up to 15,000 LItres
• Fluid protection category 4 backflow prevention
• ONscreen service reminder every 12 months
• Colours: Grey (RAL7016) and Red (RAL3002)
• Password protected
• PRessure setting in 0.1 bar. increments
• FLoor protection runtime limiter and excessive activation logging
• Volt free contact: common alarm (N/C or N/O) fully programable for specific alarms customisable via control unit)
• Extensive data storage online or offline analysis
• Advanced technology ensures the lowest power consumption, Long service life and easy maintenance
• Microprocessor control, self-learning with graphical display
• Max flow rate of 14 Ltr/min
• Connects directly to the mains (booster) water mains, via included flexible hose (Length: 400mm)

Advantages:

• Universal connection to drain fits 22 mm copper compression, 32mm PP push fit and 32mm PP solvent weld discharge pipe to BS 5254 or BS EN1451
• The user-friendly control unit displays all operating and error conditions in a logical and convinient way
• Four status LED indicators
• System safety valve monitoring
• Leak detection
• USage monitor, logs and counters
• MODBUS RTU and BACnet Communication Protocol via RS485
• Can be combined with Flamconnect Remote Service (Check with local sales office)
• Two 40cm flecible hoses (for mains and sealed system connection) included for easy installation

Developed for sealed heating and chilled water plant requiring automatic top-up, this Digifiller 1.0 Digital Filler Unit delivers reliable performance with a tidy, installer'friendly form.

Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.

The Digifiller is a wall-mounted, flow rate (up to 12 l/min) top-up pressurisation unit with 4 litre internal break tank.

Self venting pumps and preset options to remove the need for conventional commissioning of the Pressurisation Unit.

Ideal for Industrial, commercial or large domestic applications.

Available preset to 0.5 bar, 1.0 bar, 1.5 Bar.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Digital control and monitoring
• Automatic cold-fill top-up
• Compact wall-mounted format

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.

Built for sealed heating and chilled water plant requiring automatic top-up, this Flexfiller Mini 230 G4 delivers reliable performance with a tidy, installer'friendly form.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Digital control and monitoring
• Automatic cold-fill top-up
• Compact wall-mounted format

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.