Flamco

Built for reliable sealed-system top-up, the Flamco Flexfiller 180D is a floor-standing digital pressurisation unit using an electronic pressure transducer and microprocessor control to maintain minimum system pressure with precision.

Buy Flamco Flexfillers from Pumpify and receive free standard delivery.

It delivers up to 18 L/min top-up via an 18 Ltrs internal break tank and suits commercial, industrial and large domestic installations. Available in single or twin-pump configurations for sealed LPHW/CHW systems (guide volume up to 300,000 Ltrs).

• Digital control with electronic pressure transducer
• 18 Ltrs break tank; up to 18 L/min top-up
• MODBUS RTU communications; password-protected access
• Fluid Protection Category 5 (Type AB weir overflow)

Finished in black (RAL 9005) with a sequential programming menu, system fill mode and 12-month on-screen service reminder for straightforward commissioning and operation.

Built for reliable sealed-system top-up, the Flamco Flexfiller 280D is a floor-standing digital pressurisation unit using an electronic pressure transducer and microprocessor control to maintain minimum system pressure with precision.

Buy Flamco Flexfillers from Pumpify and receive free standard delivery.

It delivers up to 18 L/min top-up via an 18 Ltrs internal break tank and suits commercial, industrial and large domestic installations. Available in single or twin-pump configurations for sealed LPHW/CHW systems (guide volume up to 300,000 Ltrs).

• Digital control with electronic pressure transducer
• 18 Ltrs break tank; up to 18 L/min top-up
• MODBUS RTU communications; password-protected access
• Fluid Protection Category 5 (Type AB weir overflow)

Finished in black (RAL 9005) with a sequential programming menu, system fill mode and 12-month on-screen service reminder for straightforward commissioning and operation.

Engineered for sealed systems, the Flamco Flexfiller Midi 150D is a compact, wall-mounted digital pressurisation unit that uses an electronic pressure transducer and microprocessor control to maintain stable system pressure.

Buy the Flamco Flexfiller Midi Pressurisation Unit from Pumpify and recieve free standard delivery.

Delivering top-up flow rates up to 12 L/min via a 4 Ltrs internal break tank, it suits commercial, industrial and large domestic applications. Pressure can be set in 0.1 Bar increments across a 15 Bar range, with password-protected menus and MODBUS RTU integration.

• 4 Ltrs break tank; up to 12 L/min top-up
• Category 5 protection (Type AB weir overflow)
• Digital control with sequential programming menu
• 230V 50Hz 1ph electric pump

Finished in white (RAL 9003), the unit includes flood-protection routines, service reminders and detailed event logging for straightforward commissioning and operation.

Engineered for sealed systems, the Flamco Flexfiller Midi 225D is a compact, wall-mounted digital pressurisation unit using an electronic pressure transducer and microprocessor control to maintain stable minimum pressure. This is a Twin Pump unit.

Buy the Flamco Flexfiller Midi Pressurisation Unit from Pumpify and recieve free standard delivery.

It provides top-up flow rates up to 12 L/min via a 4 Ltrs internal break tank and suits commercial, industrial and large domestic applications. Pressure is adjustable in 0.1 Bar steps across a 12.5 Bar range.

• 4 Ltrs break tank; up to 12 L/min top-up
• Category 5 protection (Type AB weir overflow)
• MODBUS RTU communications; password-protected menus
• System fill mode and pump pulse option

Finished in white (RAL 9003) with a sequential programming menu, flood-protection routines and comprehensive event logging for straightforward commissioning and operation.

Engineered for sealed systems, the Flamco Flexfiller Midi 250D is a compact, wall-mounted digital pressurisation unit using an electronic pressure transducer and microprocessor control to maintain stable minimum pressure. This is a Twin Pump unit.

Buy the Flamco Flexfiller Midi Pressurisation Unit from Pumpify and recieve free standard delivery.

It provides top-up flow rates up to 12 L/min via a 4 Ltrs internal break tank and suits commercial, industrial and large domestic applications. Pressure is adjustable in 0.1 Bar steps across a 15 Bar range.

• 4 Ltrs break tank; up to 12 L/min top-up
• Category 5 protection (Type AB weir overflow)
• MODBUS RTU communications; password-protected menus
• System fill mode and pump pulse option

Finished in white (RAL 9003) with a sequential programming menu, flood-protection routines and comprehensive event logging for straightforward commissioning and operation.

Blending top-up pressurisation with on-demand chemical dosing, the Flamco PressDS 225D Twin Pump maintains stable pressure on sealed systems while automatically mixing inhibitor from a dedicated tank at a preset ratio.

This floor-standing unit features a 4 Ltrs mains-fed break tank and an 18 Ltrs additive reservoir. Each top-up delivers water and the correct fluid blend together, cutting site visits and maximising system protection. Ideal for commercial and industrial plant (guide volume up to 300,000 Ltrs).

• Dual pump duty/standby configuration
• Mix control user-set from 150%
• Top-up to < 18 L/min; max delivery 3 Bar
• Category 5 (Type AB weir overflow) protection

Integration is simple via MODBUS RTU, password-protected menus and volt-free contacts, with flood protection, service reminders and additive-empty alerts built in. Finished in black (RAL 9005).

Blending top-up pressurisation with on-demand chemical dosing, the Flamco PressDS 250D Twin Pump maintains stable pressure on sealed systems while automatically mixing inhibitor from a dedicated tank at a preset ratio.

This floor-standing unit features a 4 Ltrs mains-fed break tank and an 18 Ltrs additive reservoir. Each top-up delivers water and the correct fluid blend together, cutting site visits and maximising system protection. Ideal for commercial and industrial plant (guide volume up to 300,000 Ltrs).

• Dual pump duty/standby configuration
• Mix control user-set from 150%
• Top-up to < 18 L/min; max delivery 6 Bar
• Category 5 (Type AB weir overflow) protection

Integration is simple via MODBUS RTU, password-protected menus and volt-free contacts, with flood protection, service reminders and additive-empty alerts built in. Finished in black (RAL 9005).

Blending top-up pressurisation with on-demand chemical dosing, the Flamco PressDS 280D Twin Pump maintains stable pressure on sealed systems while automatically mixing inhibitor from a dedicated tank at a preset ratio.

This floor-standing unit features a 4 Ltrs mains-fed break tank and an 18 Ltrs additive reservoir. Each top-up delivers water and the correct fluid blend together, cutting site visits and maximising system protection. Ideal for commercial and industrial plant (guide volume up to 300,000 Ltrs).

• Dual pump duty/standby configuration
• Mix control user-set from 150%
• Top-up to < 18 L/min; max delivery 3 Bar
• Category 5 (Type AB weir overflow) protection

Integration is simple via MODBUS RTU, password-protected menus and volt-free contacts, with flood protection, service reminders and additive-empty alerts built in. Finished in black (RAL 9005).

Engineered for sealed systems, the FLAMCO Midi PSD 150D vacuum degasser (Pressure Step Degasser) strips dissolved gases to stabilise pressure and improve plant efficiency. Single pump.

Buy the Flamco PSD Degasser from Pumpify and recieve free standard delivery.

The unit samples system fluid, isolates it and applies a full vacuum so dissolved air is released per Henry's Law, vents this to atmosphere, then returns deaerated water to the circuit. A digital processor automates the cycle with a turbo mode for rapid commissioning and a real-time status display.

• Automatic vacuum deaeration with turbo & normal intervals
• Digital control and real-time component status
• Password-protected settings; 0.1 Bar pressure steps
• Event logging and volt-free common fault output

Suitable for commercial, industrial and residential LPHW/CHW applications. Model guide volume: up to 50,000 Ltrs (larger variants available up to 300,000 Ltrs).

Engineered for sealed systems, the FLAMCO Midi PSD 150D vacuum degasser (Pressure Step Degasser) strips dissolved gases to stabilise pressure and improve plant efficiency. Single pump.

Buy the Flamco PSD Degasser from Pumpify and recieve free standard delivery.

The unit samples system fluid, isolates it and applies a full vacuum so dissolved air is released per Henry's Law, vents this to atmosphere, then returns deaerated water to the circuit. A digital processor automates the cycle with a turbo mode for rapid commissioning and a real-time status display.

• Automatic vacuum deaeration with turbo & normal intervals
• Digital control and real-time component status
• Password-protected settings; 0.1 Bar pressure steps
• Event logging and volt-free common fault output

Suitable for commercial, industrial and residential LPHW/CHW applications. Model guide volume: up to 50,000 Ltrs (larger variants available up to 300,000 Ltrs).

Engineered for sealed systems, the FLAMCO Midi PSD 150D vacuum degasser (Pressure Step Degasser) strips dissolved gases to stabilise pressure and improve plant efficiency. Single pump.

Buy the Flamco PSD Degasser from Pumpify and recieve free standard delivery.

The unit samples system fluid, isolates it and applies a full vacuum so dissolved air is released per Henry's Law, vents this to atmosphere, then returns deaerated water to the circuit. A digital processor automates the cycle with a turbo mode for rapid commissioning and a real-time status display.

• Automatic vacuum deaeration with turbo & normal intervals
• Digital control and real-time component status
• Password-protected settings; 0.1 Bar pressure steps
• Event logging and volt-free common fault output

Suitable for commercial, industrial and residential LPHW/CHW applications. Model guide volume: up to 50,000 Ltrs (larger variants available up to 300,000 Ltrs).

Engineered for sealed systems, the FLAMCO Midi PSD 150D vacuum degasser (Pressure Step Degasser) strips dissolved gases to stabilise pressure and improve plant efficiency. Single pump.

Buy the Flamco PSD Degasser from Pumpify and recieve free standard delivery.

The unit samples system fluid, isolates it and applies a full vacuum so dissolved air is released per Henry's Law, vents this to atmosphere, then returns deaerated water to the circuit. A digital processor automates the cycle with a turbo mode for rapid commissioning and a real-time status display.

• Automatic vacuum deaeration with turbo & normal intervals
• Digital control and real-time component status
• Password-protected settings; 0.1 Bar pressure steps
• Event logging and volt-free common fault output

Suitable for commercial, industrial and residential LPHW/CHW applications. Model guide volume: up to 50,000 Ltrs (larger variants available up to 300,000 Ltrs).

Designed for sealed LPHW/CHW systems, the Flamco PressDS Plus 250D integrates pressurisation, vacuum degassing and on-demand dosing to keep system pressure stable, remove dissolved gases and blend the correct additive mix during top-up.

Buy the Flamco PresDS Plus from Pumps Sales Direct and receive free standard delivery.

A compact, totally enclosed Twin Pump unit, it uses a digital processor to automate the sampleisolatevacuumventreintroduce cycle (with turbo mode for rapid commissioning). Top-up capacity is <18 L/min; an 18 Ltrs additive tank blends inhibitor at the point of fill. Guide system volume: up to 300,000 Ltrs.

• Category 5 protection (Type AB weir overflow)
• MODBUS RTU communications; password-protected access
• Mix ratios user-set from 150% via balancing valves
• Pressure setpoints in 0.1 Bar increments

Ideal for commercial plantrooms, the black (RAL 9005) enclosure includes sequential programming, system fill mode, pump-pulse, flood-protection routines and comprehensive event logging.

Designed for sealed LPHW/CHW systems, the Flamco PressDS Plus 2160D integrates pressurisation, vacuum degassing and on-demand dosing to keep system pressure stable, remove dissolved gases and blend the correct additive mix during top-up.

Buy the Flamco PresDS Plus from Pumps Sales Direct and receive free standard delivery.

A compact, totally enclosed Twin Pump unit, it uses a digital processor to automate the sampleisolatevacuumventreintroduce cycle (with turbo mode for rapid commissioning). Top-up capacity is <18 L/min; an 18 Ltrs additive tank blends inhibitor at the point of fill. Guide system volume: up to 300,000 Ltrs.

• Category 5 protection (Type AB weir overflow)
• MODBUS RTU communications; password-protected access
• Mix ratios user-set from 150% via balancing valves
• Pressure setpoints in 0.1 Bar increments

Ideal for commercial plantrooms, the black (RAL 9005) enclosure includes sequential programming, system fill mode, pump-pulse, flood-protection routines and comprehensive event logging.

Cabinetised and plantroom-ready, the Flamco Flamcomat D02 Cabinetised Pump Set pairs a Grundfos CM1-4 multistage pump with a fully compliant enclosure for dependable duty across commercial and industrial installations.

The set features a compact footprint (680 mm D × 680 mm W × 1400 mm H), straightforward pipework (1 12" vessel and system; 12" top-up) and a dry weight of 105 kg. An IP54-rated controller, IPX5-rated pump and a WRAS-approved float valve to BS1212 Part 2 support safe, long-life operation.

• Includes Grundfos CM1-4 horizontal multistage end-suction pump
• Compact cabinet for easy siting in plantrooms
• IP54 controller / IPX5 pump for robust protection
• WRAS-approved float valve for reliable top-up

Built to recognised standards with CE-marked components, the Flamcomat D02 is suitable for sealed heating and chilled-water plant where reliability and compliance are essential.

Cabinetised and plantroom-ready, the Flamco Flamcomat D02 Cabinetised Pump Set pairs a Grundfos CM3-6 multistage pump with a fully compliant enclosure for dependable duty across commercial and industrial installations.

Buy Flamco cabinetised Flamcomat Pump Sets from Pumpify and recieve free standard delivery.

The Flamco Flamcomat D1 (D10) Cabinetised Pump Set, includes a Grundfos CM3-6 Pump.

The set features a compact footprint (680 mm D × 680 mm W × 1400 mm H), straightforward pipework (1 12" vessel and system; 12" top-up) and a dry weight of 105 kg. An IP54-rated controller, IPX5-rated pump and a WRAS-approved float valve to BS1212 Part 2 support safe, long-life operation.

• Includes Grundfos CM1-4 horizontal multistage end-suction pump
• Compact cabinet for easy siting in plantrooms
• IP54 controller / IPX5 pump for robust protection
• WRAS-approved float valve for reliable top-up

Built to recognised standards with CE-marked components, the Flamcomat D02 is suitable for sealed heating and chilled-water plant where reliability and compliance are essential.