Flamco

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

The SideFlow Clean is a partial flow filter for continuous cleaning of the system for central heating and cooling installations.

Connecting a SideFlow Clean to an installation ensures that a proportion (10% PICV) of the main flow is filtered, which means dirt and magnetite are captured through a combination of a filter bag and magnetic filtration.

Side stream filtration for the removal of magnetic and nonmagnetic suspended solids.

Quick and easy to install and maintain.

Simple to mount thanks to integrated wall fastening.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Optimise comfort and efficiency with the Flamco XStream Vent — a high-performance air separator for sealed LPHW and CHW systems that rapidly removes entrained air to protect plant and boost performance.

A unique ECO/MAX selector lets you choose partial-flow (ECO) or full-flow (MAX) deaeration. Expect measurable gains: up to 15% lower energy use and up to 6% higher system efficiency*. The unit rotates 360° for easy installation, works in any flow direction, and includes integrated insulation to minimise heat loss.

• ECO/MAX modes for tailored air separation
• 360° rotatable body; no flow-direction requirement
• Integrated insulation to cut standby losses
• Service indicator shows last flush/vent in MAX mode
• Blow-off valve included for safe venting

Cut fouling and protect plant with the Flamco XStream Clean — a high-efficiency dirt separator for sealed LPHW and CHW systems that captures debris and magnetite to reduce wear, breakdowns and energy use.

A unique ECO/MAX selector allows partial-flow (ECO) or full-flow (MAX) separation. Expect measurable gains: up to 15% lower energy consumption and up to 6% higher system efficiency*. The body rotates 360° for easy installs, works in any flow direction, and features integrated insulation to minimise heat loss.

• Powerful internal magnet for enhanced magnetite capture
• Integrated service indicator shows last flush/vent in MAX mode
• Low maintenance operation with long, consistent performance

When space is tight, the Flamco XStream Vent-Clean combines high-efficiency air and dirt separation to protect plant and boost performance in sealed heating and cooling systems.

A unique ECO/MAX selector lets you choose partial-flow (ECO) or full-flow (MAX) operation. Expect measurable gains: up to 15% lower energy use and up to 6% higher system efficiency*. The body rotates 360°, works in any flow direction, and includes integrated insulation to minimise heat loss. A powerful internal magnet enhances magnetite capture, and a service indicator shows the last MAX-mode flush/vent.

• Dual function: air & dirt removal in one compact unit
• ECO/MAX modes for targeted or full-flow separation
• 360° rotatable design; variable flow direction
• Integrated insulation to cut standby losses
• Magnetic assist for efficient magnetite capture
• Service indicator for quick maintenance checks

When space is tight, the Flamco XStream Vent-Clean combines high-efficiency air and dirt separation to protect plant and boost performance in sealed heating and cooling systems.

A unique ECO/MAX selector lets you choose partial-flow (ECO) or full-flow (MAX) operation. Expect measurable gains: up to 15% lower energy use and up to 6% higher system efficiency*. The body rotates 360°, works in any flow direction, and includes integrated insulation to minimise heat loss. A powerful internal magnet enhances magnetite capture, and a service indicator shows the last MAX-mode flush/vent.

• Dual function: air & dirt removal in one compact unit
• ECO/MAX modes for targeted or full-flow separation
• 360° rotatable design; variable flow direction
• Integrated insulation to cut standby losses
• Magnetic assist for efficient magnetite capture
• Service indicator for quick maintenance checks

Flamco - SideFlow Clean Partial Flow Air & Dirt Separator

This is a Spares/Kit item, please get in touch for product compatibility.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Optimum dirt separation combined with energy efficiency.

For use in sealed heating and cooling systems.

Dirt separators protect the boilers, pumps and fittings from damage caused by the deposit of dirt particles.

Dirt separators also offer benefits in the event of application in old systems or when an open system is converted to a closed system.

Optimum dirt separation combined with energy efficiency.

For use in sealed heating and cooling systems.

Dirt separators protect the boilers, pumps and fittings from damage caused by the deposit of dirt particles.

Dirt separators also offer benefits in the event of application in old systems or when an open system is converted to a closed system.

Protect plant and boost efficiency with the Flamcovent Clean Smart — a compact air & dirt separator for sealed heating and cooling systems that strips micro-bubbles and fine particulates with minimal resistance.

By removing air and debris, it reduces wear on boilers, pumps and fittings, cuts noise, and improves heat transfer. The Smart core design delivers high performance with a notably low pressure drop and virtually no maintenance.

• Up to 60% better separation versus conventional units
• Standard velocities up to 3 m/s with negligible flow resistance
• Four neodymium magnets integrated in the logo for magnetite capture
• Compact & lightweight; fits all common pipework types
• Consistent performance throughout its service life