Grundfos

Grundfos GT-H are maintenance-free multi-purpose pressure tanks with a capacity ranging from 2 to 100 litres.
The tanks are designed for a maximum operating pressure between 10 and 16 bar and a maximum liquid temperature of 90 °C.

The tank is a steel pressure tank made of a virgin propylene liner. The tanks have a non-replaceable FDA-approved high-grade butyl diaphragm, which is pre-charged with compressed nitrogen (1.9 bar).

To ensure long-lasting durability, the diaphragm and liner are both reinforced in specific wear areas. All internal parts, including the air valve, are rounded to prevent piercing of the diaphragm in extreme conditions. The water connection uniquely provides a dual water and air seal ensuring a completely leakage-free pressure tank. Combined with booster and irrigation systems as well as thermal expansion and hydraulic hammer arrestors, the tank is appropriate for drinking-water and grey-water applications. It provides optimised comfort and a patented stainless-steel water connection. The tank also features:

GT-U-800 PN16 G11/2 V (coated flange)

Grundfos GT-U are bladder pressure tanks with a capacity ranging from 8 to 3000 litres. The tanks are designed for a maximum operating pressure between 10, 16 and 25 bar and a maximum liquid temperature of 70 °C. The tanks are approved for drinking water.

The tanks are steel pressure tanks, with non-toxic butyl rubber bladder enclosed by compressed nitrogen.

A pressure tank ensures controlled pressure in the water supply and thereby limits the switching frequency of the pump unit in case of low water consumption or loss due to leakage. This ensures increased comfort in your installation by limiting the start and stop frequency of your pump. It also creates a more stable assembly by compensating for pressure drops when a tap is opened, while reducing problems with water hammer in the pipes.

GT-U-800 PN10 G11/2 V (coated flange)

Grundfos GT-U are bladder pressure tanks with a capacity ranging from 8 to 3000 litres. The tanks are designed for a maximum operating pressure between 10, 16 and 25 bar and a maximum liquid temperature of 70 °C. The tanks are approved for drinking water.

The tanks are steel pressure tanks, with non-toxic butyl rubber bladder enclosed by compressed nitrogen.

A pressure tank ensures controlled pressure in the water supply and thereby limits the switching frequency of the pump unit in case of low water consumption or loss due to leakage. This ensures increased comfort in your installation by limiting the start and stop frequency of your pump. It also creates a more stable assembly by compensating for pressure drops when a tap is opened, while reducing problems with water hammer in the pipes.

GT-HR-800 PN6 R1 V

Grundfos GT-HR are pressure tanks with a capacity ranging from 8 to 1000 litres. The tanks are designed for a maximum operating pressure of 6 bar and a maximum liquid temperature of 90 °C.

The tank is a steel pressure tank with a non-replaceable rubber diaphragm for heating applications. The tanks have a non-replaceable diaphragm, dividing the tank chamber into two compartments: the upper compartment is pre-charged with compressed nitrogen (1.5 bar) while the lower compartment contains the diaphragm itself, which is a polypropylene (PP) liner.

A pressure tank ensures controlled pressure in the water supply and thereby limits the switching frequency of the pump unit in case of low water consumption or loss due to leakage. This ensures increased comfort in your installation by limiting the start and stop frequency of your pump. It also creates a more stable assembly by compensating for pressure drops when a tap is opened, while reducing problems with water hammer in the pipes.