-
GR-98057242
Grundfos - UPS 40-50FN Domestic Hot Water Circulator Pump - Stainless SteelUPS 40-50 FN 250
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic shaft and radial bearings
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
£1,627.20 RRP £1,057.68 £881.40
In stock
Free Standard Delivery
-
95906773
Grundfos - UPS 32-55 N 180 Light Commercial Circulator - 230V - Stainless SteelUPS 32-55 N 180
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic shaft and radial bearings
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
£1,303.20 RRP £847.08 £705.90
In stock
Free Standard Delivery
-
GR-98057227
Grundfos - UPS 25-80N (180) Hot Water Circulator Pump - 240V - Stainless SteelUPS 25-80 N 180
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic shaft and radial bearings
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
£1,131.60 RRP £735.54 £612.95
In stock
Free Standard Delivery
-
98346618
Grundfos - TP 40-50/2 S In-Line Hot Water Circulator Pump - 415V - Three Phase - 133 Ltr/min. - Stainless SteelTP 40-50/2 A-F-I-BQQE-AW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£2,734.80 RRP £1,777.62 £1,481.35
In stock
Free Standard Delivery
-
98282357
Grundfos - TP 40-50/2 S In-Line Circulator Pump - 240V - Single Phase - 133 Ltr/min. - Stainless SteelTP 40-50/2 A-F-I-BQQE-AW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£2,864.40 RRP £1,861.86 £1,551.55
In stock
Free Standard Delivery
-
98282356
Grundfos - TP 40-50/2 A F A BQQE 0.12kW In-Line Circulator Pump - 415V - Three Phase - 133 Ltr/min. - Cast IronTP 40-50/2 A-F-A-BQQE-AW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
£1,444.80 RRP £939.12 £782.60
In stock
Free Standard Delivery
-
GR-96401883
Grundfos - TP 40-30/4 0.12kw 2900RPM BQQE 96401883 Commercial Circulator Pump - 415V - OBSOLETEGrundfos TP 40-30/4 0.12kw 1450RPM Single Head Pump, 415v. Grundfos TP 40-30/4 is a single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. Pipework connection is via PN 6/10/16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is fitted with a fan-cooled asynchronous motor.
3 week lead time
Free Standard Delivery
-
GR-96401879
Grundfos - TP 40-30/4 0.12kw 1450RPM BQQE 96401879 Commercial Circulator Pump - 230V - OBSOLETEGrundfos TP 40-30/4 0.12kw 1450RPM Single Head Pump, 230v. Grundfos TP 40-30/4 is a single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. Pipework connection is via PN 6/10/16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is fitted with a fan-cooled asynchronous motor.
3 week lead time
Free Standard Delivery
-
98346615
Grundfos - TP 32-50/2R S In-Line Hot Water Circulator Pump - 415V - Three Phase - 116 Ltr/min. - Stainless SteelTP 32-50/2 A-O-I-BQQE-AW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£2,252.40 RRP £1,464.06 £1,220.05
In stock
Free Standard Delivery
-
98282162
Grundfos - TP 32-50/2R S In-Line Circulator Pump - 240V - Single Phase - 116 Ltr/min. - Stainless SteelTP 32-50/2 A-O-I-BQQE-AW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£2,383.20 RRP £1,549.08 £1,290.90
In stock
Free Standard Delivery
-
98282120
Grundfos - TP 32-50/2R A O A BQQE 0.12kW In-Line Circulator Pump - 415V - Three Phase - 116 Ltr/min. - Cast IronTP 32-50/2 A-O-A-BQQE-AW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
£1,197.60 RRP £778.44 £648.70
In stock
Free Standard Delivery
-
GR-96401823
Grundfos - TP 32-60/2 0.25kw 2900RPM BQQE 96401823 Commercial Circulator Pump - 415V - OBSOLETE - Cast Iron - 0.25kWTP 32-60/2 A-F-A-BUBE
The pump unit is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
3 week lead time
Free Standard Delivery
-
98958119
Grundfos - TP 32-230/2 A-F-Z-BQQE-FX1 In-Line Hot Water Circulator Pump - 240V - Single Phase - 150 Ltr/min. - Stainless SteelTP 32-230/2 A-F-Z-BQQE-FW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£4,452.00 RRP £2,893.80 £2,411.50
In stock
Free Standard Delivery
-
GR-98592079
Grundfos - TP 32-180/2 BQQE Commercial Circulator Pump - 400V - 0.55kWTP 32-180/2 A-F-A-BQQE-EW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
£2,022.00 RRP £1,314.30 £1,095.25
In stock
Free Standard Delivery
-
98958118
Grundfos - TP 32-180/2 B In-Line Hot Water Circulator Pump - 415V - Three Phase - 150 Ltr/min. - Stainless SteelTP 32-180/2 A-F-Z-BQQE-EW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£3,744.00 RRP £2,433.60 £2,028.00
In stock
Free Standard Delivery
-
98283542
Grundfos - TP 32-150/2 B In-Line Hot Water Circulator Pump - 415V - Three Phase - 141 Ltr/min. - Stainless SteelTP 32-150/2 A-F-Z-BQQE-DW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£3,320.40 RRP £2,158.26 £1,798.55
In stock
Free Standard Delivery
Grundfos
(12151 products)
Filters Products
Filters Products