Grundfos

Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2.

NBE 125-250/249 AHASF2AESBQQEPW3

Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled asynchronous motor.

Suitable for: Commercial air conditioning, Industrial heating, Irrigation

NK 125-250/249 AA2F2AESBQQEPW3

Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.

Suitable for: Commercial heating

NKE 125-200/219 BA2F2AESBQQENWA

Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled, permanent-magnet synchronous motor. Pump and motor are mounted on a common base frame. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.

Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial process water treatment, Desalination, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment

NKE 125-250/249 AHA2F2AESBQQEPW3

Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.

Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial process water treatment, Desalination, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment

SE1.100.100.55.A.4.51D.B

Non-self-priming, single-stage, centrifugal pump unit designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operation. The liquidless and maintenance free cooling system ensures that the pump can be used for submerged or dry installation. The revolutionary S-tube® impeller provides free spherical passage of solids up to 100 mm and is appropriate for wastewater with a dry matter content of up to 3 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment

SE1.100.100.55.A.Ex.4.51D.B

Non-self-priming, single-stage, centrifugal pump unit designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operation. The liquidless and maintenance free cooling system ensures that the pump can be used for submerged or dry installation. The revolutionary S-tube® impeller provides free spherical passage of solids up to 100 mm and is appropriate for wastewater with a dry matter content of up to 3 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment

SL1.100.100.55.4.51D.C

Non-self-priming, single-stage, centrifugal pump unit designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operations in submerged installation. The revolutionary S-tube® impeller provides free spherical passage of solids up to 100 mm and is appropriate for wastewater with a dry matter content of up to 3 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment

SL1.100.100.55.A.4.51D.C.Z

Non-self-priming, single-stage, centrifugal pump unit designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operations in submerged installation. The revolutionary S-tube® impeller provides free spherical passage of solids up to 100 mm and is appropriate for wastewater with a dry matter content of up to 3 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment

SL1.100.100.55.EX.4.51D.C

Non-self-priming, single-stage, centrifugal pump unit designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operations in submerged installation. The revolutionary S-tube® impeller provides free spherical passage of solids up to 100 mm and is appropriate for wastewater with a dry matter content of up to 3 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment