-
98513746
Grundfos - MTR 64 5/5-1 A F A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase -5 StageMTR 64-5/5-1 A-F-A-HUUV
Multistage, immersible, self-priming, centrifugal Pump for vertical setup in tanks etc. The Pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel.
- Suitable for Machining,
- The impeller is manufactured from Stainless Steel
- Maximum operating pressure: 25 Bar.
- Temperature liquid range: -10 .. 90 °C.
- Approvals include CE,EAC,UKCA
£16,929.60 RRP £11,850.72 £9,875.60
6 week lead time
Free Standard Delivery
-
98349249
Grundfos - MTR 32 6/6 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 6 StageMTR 32-6/6 A-F-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
£10,425.60 RRP £7,297.92 £6,081.60
6 week lead time
Free Standard Delivery
-
96514858
Grundfos - MTR 1S 19/19 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 19 StageMTR 1S-19/19 A-W-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
£1,939.20 RRP £1,357.44 £1,131.20
6 week lead time
Free Standard Delivery
-
98513569
Grundfos - MTR 5 14/14 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 14 StageMTR 5-14/14 A-W-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
£2,756.40 RRP £1,929.48 £1,607.90
6 week lead time
Free Standard Delivery
-
98513747
Grundfos - MTR 64 5/5 A F A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 5 StageMTR 64-5/5 A-F-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
£16,929.60 RRP £11,850.72 £9,875.60
6 week lead time
Free Standard Delivery
-
98513745
Grundfos - MTR 64 5/5-2 A F A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 5 StageMTR 64-5/5-2 A-F-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
£16,929.60 RRP £11,850.72 £9,875.60
6 week lead time
Free Standard Delivery
-
98513705
Grundfos - MTR 45 5/5 A F A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 5 StageMTR 45-5/5 A-F-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
£14,653.20 RRP £10,257.24 £8,547.70
6 week lead time
Free Standard Delivery
-
99159863
Grundfos - MTRE 1 19/19 HS W A HUUV 5.5kW Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 184 Ltr/min.MTRE 1-19/19 HS-W-A-HUUV
Multistage, immersible, self-priming, centrifugal Pump for vertical setup in tanks etc. The Pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. MTRE-HS is a single-Pump setup capable of generating up to 38 Bar.
- Suitable for Machining,
- The impeller is manufactured from Stainless Steel
- Maximum operating pressure: 38 Bar.
- Temperature liquid range: -10 .. 90 °C.
- Approvals include CE,UKCA,RCM,cURus/cCSAus
£5,395.20 RRP £3,776.64 £3,147.20
6 week lead time
Free Standard Delivery
-
98825707
Grundfos - MTR 8 11/11 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 11 StageMTR 8-11/11 A-W-A-HUUV
Multistage, immersible, self-priming, centrifugal Pump for vertical setup in tanks etc. The Pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel.
- Suitable for Machining,
- The impeller is manufactured from Stainless Steel
- Maximum operating pressure: 25 Bar.
- Temperature liquid range: -10 .. 90 °C.
- Approvals include CE,EAC,UKCA,RCM,Morocco
£3,794.40 RRP £2,656.08 £2,213.40
6 week lead time
Free Standard Delivery
-
99159851
Grundfos - MTRE 1S 19/19 HS W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 19 StageMTRE 1S-19/19 HS-W-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. MTRE-HS is a single-pump solution capable of generating up to 38 bar. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption".- "Alarm": Motor has stopped (flashing red indicator lights)
- "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
- "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
Suitable for: Machining
£4,899.60 RRP £3,429.72 £2,858.10
6 week lead time
Free Standard Delivery
-
99159865
Grundfos - MTRE 3 19/19 HS W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 19 StageMTRE 3-19/19 HS-W-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. MTRE-HS is a single-pump solution capable of generating up to 38 bar. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption".- "Alarm": Motor has stopped (flashing red indicator lights)
- "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
- "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
Suitable for: Machining
£5,886.00 RRP £4,120.20 £3,433.50
6 week lead time
Free Standard Delivery
-
98513656
Grundfos - MTR 15 9/9 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 9 StageMTR 15-9/9 A-W-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
£4,827.60 RRP £3,379.32 £2,816.10
6 week lead time
Free Standard Delivery
-
98494988
Grundfos - MTR 3 19/19 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 19 StageMTR 3-19/19 A-W-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
£2,679.60 RRP £1,875.72 £1,563.10
6 week lead time
Free Standard Delivery
-
98513704
Grundfos - MTR 45 5/5-2 A F A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 5 StageMTR 45-5/5-2 A-F-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
£14,653.20 RRP £10,257.24 £8,547.70
6 week lead time
Free Standard Delivery
-
98511257
Grundfos - MTR 1 19/19 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 19 StageMTR 1-19/19 A-W-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
£2,080.80 RRP £1,498.18 £1,248.48
6 week lead time
Free Standard Delivery
Grundfos
(12151 products)
Filters Products
Filters Products