Grundfos

UNILIFT AP50B is a stainless-steel submersible pump designed for pumping wastewater with particles up to 50 mm. It can be installed on an auto coupling, allowing for easy maintenance and other purposes.

UNILIFT AP50B is a stainless-steel submersible pump designed for pumping wastewater with particles up to 50 mm. It can be installed on an auto coupling, allowing for easy maintenance and other purposes.

UNILIFT AP35B.50.08.A1V
Submersible effluent pump unit

Vertical single-stage Stainless Steel submersible pump with integrated submersible 1-phase motor.

The pump is equipped with ring stand and carrying handle and is supplied with a 10 m mains cable and a level switch for self-operating start and stop.

The impeller is a VORTEX impeller for 35 mm free passage appropriate for pumping surface water, groundwater, wastewater and similar.

The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.

The motor is insulation class F with thermal overload protection and has long-life deep-groove greased-for-life ball bearings.

The pump has Rp 2 inch discharge port and is ready for installation either free-standing or on an auto-coupling system.

Suitable for: Commercial wastewater, Domestic wastewater

UNILIFT AP35B is a stainless-steel submersible pump designed for pumping effluents with particles up to 35 mm. It can be installed on an auto coupling, allowing for easy maintenance and other purposes.

UNILIFT AP35B.50.08.1V
Submersible effluent pump unit

Vertical single-stage Stainless Steel submersible pump with integrated submersible 1-phase motor.

The pump is equipped with ring stand and carrying handle and is supplied with a 10 m mains cable.

The impeller is a VORTEX impeller for 35 mm free passage appropriate for pumping surface water, groundwater, wastewater and similar.

The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.

The motor is insulation class F with thermal overload protection and has long-life deep-groove greased-for-life ball bearings.

The pump has Rp 2 inch discharge port and is ready for installation either free-standing or on an auto-coupling assembly.

Suitable for: Commercial wastewater, Domestic wastewater

UNILIFT AP35B is a stainless-steel submersible pump designed for pumping effluents with particles up to 35 mm. It can be installed on an auto coupling, allowing for easy maintenance and other purposes.

SEV.100.100.30.4.50D

Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operation. The liquidless and maintenance free cooling system ensures that the pump can be used for submerged or dry installation. The high-efficiency SuperVortex impeller provides passage of long fibres and solids up to 100 mm and is appropriate for wastewater with a dry matter content of up to 5 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment

SEV.100.100.30.A.Ex.4.50D

Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operation. The liquidless and maintenance free cooling system ensures that the pump can be used for submerged or dry installation. The high-efficiency SuperVortex impeller provides passage of long fibres and solids up to 100 mm and is appropriate for wastewater with a dry matter content of up to 5 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment

SEV.100.100.40.4.51D

Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operation. The liquidless and maintenance free cooling system ensures that the pump can be used for submerged or dry installation. The high-efficiency SuperVortex impeller provides passage of long fibres and solids up to 100 mm and is appropriate for wastewater with a dry matter content of up to 5 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment

SEV.100.100.40.A.Ex.4.51D

Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operation. The liquidless and maintenance free cooling system ensures that the pump can be used for submerged or dry installation. The high-efficiency SuperVortex impeller provides passage of long fibres and solids up to 100 mm and is appropriate for wastewater with a dry matter content of up to 5 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment

SEV.100.100.55.4.51D

Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operation. The liquidless and maintenance free cooling system ensures that the pump can be used for submerged or dry installation. The high-efficiency SuperVortex impeller provides passage of long fibres and solids up to 100 mm and is appropriate for wastewater with a dry matter content of up to 5 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment

SEV.100.100.55.A.Ex.4.51D

Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operation. The liquidless and maintenance free cooling system ensures that the pump can be used for submerged or dry installation. The high-efficiency SuperVortex impeller provides passage of long fibres and solids up to 100 mm and is appropriate for wastewater with a dry matter content of up to 5 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment

SEV.100.100.75.4.51D

Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operation. The liquidless and maintenance free cooling system ensures that the pump can be used for submerged or dry installation. The high-efficiency SuperVortex impeller provides passage of long fibres and solids up to 100 mm and is appropriate for wastewater with a dry matter content of up to 5 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment

SEV.100.100.75.A.Ex.4.51D

Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operation. The liquidless and maintenance free cooling system ensures that the pump can be used for submerged or dry installation. The high-efficiency SuperVortex impeller provides passage of long fibres and solids up to 100 mm and is appropriate for wastewater with a dry matter content of up to 5 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment

SEV.65.65.22.2.50D

Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operation. The liquidless and maintenance free cooling system ensures that the pump can be used for submerged or dry installation. The high-efficiency SuperVortex impeller provides passage of long fibres and solids up to 65 mm and is appropriate for wastewater with a dry matter content of up to 5 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment

SEV.65.65.22.A.Ex.2.50D

Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operation. The liquidless and maintenance free cooling system ensures that the pump can be used for submerged or dry installation. The high-efficiency SuperVortex impeller provides passage of long fibres and solids up to 65 mm and is appropriate for wastewater with a dry matter content of up to 5 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.

Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment